Vidikron Projector Vision Model 100t User Manual

Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 1 
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate a Vidikron Vision Model 90t 
or Model 100t DLP Projector. 
Throughout this manual, the Vidikron Vision Model 90t and Model 100t DLP Projectors are 
referred to collectively as the “Vision 90t/100t.” The information in this manual applies to 
both projectors except where otherwise indicated. 
Target AudienceVidikron has prepared this manual to help...

Introduction
2 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
Graphic Conventions: These symbols appear in numerous places throughout the manual, 
to emphasize points that you must keep in mind to avoid problems with your equipment or 
injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
TIPS highlight time-saving short cuts and helpful guidelines for using 
certain features. 
NOTES emphasize text with unusual importance...

Introduction
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 3 
1.3 
Description, Features and 
Benefits
Congratulations on your purchase of a Vidikron Vision Model 90t or Model 100t (“Vision 
90t/100t“) Digital Light Processing (DLP™) Projector, among the world’s first THX® Certified, 
high-definition home theater projectors.
The Vision 90t/100t has been specifically engineered to produce high performance video in 
the kinds of environments most people use to enjoy their entertainment....

Introduction
4 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
The Vision 90t/100t is available in both a soft white or a graphite gray chassis to blend 
seamlessly in your home theater environment.
Key Features and BenefitsThe Vision 90t/100t offers these key features and benefits:
 Native Resolution: 1280 x 720 (16:9 Native Aspect Ratio)
 3-chip Digital Light Processing (DLP™) system 
 Two DVI Inputs with High-bandwidth Digital Content Protection (HDCP)
HDTV Compatible
 Multiple...

Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 5 
2.1 
Vision 90t/100t at a GlanceFigure 2-1 shows the key Vision 90t/100t components. 
Figure 2-1. Vision 90t/100t Front/Bottom/Side View
1. EXHAUST VENT
2.CABLE OPENING 
Pass cables through this opening.
3. LENS
4. INTAKE VENT
5. IR SENSOR
6. VIDIKRON LOGO
2Controls and Functions
65 34122 

Controls and Functions
6 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
2.2 
Vision 90t/100t Rear Panel
Figure 2-2 shows the Vision 90t/100t rear panel. 
Figure 2-2. Vision 90t/100t Rear Panel
1.DVI 1 / DVI 2 (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner with 
a DVI or HDMI output.
2.COMPONENT VIDEO (RCA connectors) 
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for 
component video from sources such as DVD...

Controls and Functions
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 7 
5.12-VOLT (750 mA) TRIGGER OUTPUTS  
Connection for up to three (3), 12-volt trigger-controlled devices. These can be 
retractable screens, screen masks or the Vidikron CineWide with AutoScope system. 
6.S-VIDEO 1 / S-VIDEO 2 
Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super 
VHS (S-VHS) VCR. 
7.IR 
Wired input from an external remote control or infrared receiver. It is a...

Controls and Functions
8 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
15.MENU BUTTON  
Pressing the MENU button will bring up the main menu. Also, if you are in an adjustment 
mode or function, pressing MENU will bring the menu back one level.
16.IR SENSOR 
Receives the IR commands from the remote.
17.POWER BUTTON 
Press once to turn on the Vision 90t/100t. Press it again to put it into Standby mode. For 
a discrete on or off command, you can use the direct access buttons on the...

Controls and Functions
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 9 
2.3 
Vision 90t/100t Remote 
Control
Figure 2-3 shows the Vision 90t/100t remote control, and the paragraphs that follow describe 
its functionality.
Figure 2-3. Vision 90t/100t Remote Control Functions
1.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.LIGHT  
Press to illuminate the buttons. 
3.ON / OFF 
Press to turn the projector on or off.
4.CODE 
For...

Controls and Functions
10 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
5.Cursor Keys (, , , )  
Use these buttons to select items or settings, adjust settings or switch display patterns. 
 
When no menus are present on-screen, the UP and DOWN buttons toggle through the 
available aspect ratios, in this order: 
 
UP Button = Anamorphic - Standard (4:3) - Letterbox - IntelliWide - Cinema - IntelliWide 
2.35
 
DOWN Button = IntelliWide 2.35 - Cinema - IntelliWide - Letterbox - Standard...