Vidikron Projector Vision Model 10 User Manual
Here you can view all the pages of manual Vidikron Projector Vision Model 10 User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
Maintenance and Troubleshooting Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 51 PREL IMINARY 5.4 Lamp Maintenance The projector lamp has a life of 2,000 hours. Maintain proper ventilation to keep the lamp operating throughout its lifetime. Do not subject the projector to unnecessary vibration. Lamp replacement is recommended after approximately 2,000 cumulative hours of use or when you notice a significant deterioration in the picture and color quality. To find out how long the...
Page 62
Maintenance and Troubleshooting 52 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY 5.6 Lamp Replacement 1. Turn off the projector and wait for the cooling fan to stop. 2. Unplug the power cord. Allow the projector to cool down for approximately one hour prior to removing the lamp assembly for replacement. 3.Loosen the two captive lamp cover screws and remove the cover. 4. Loosen the four lamp assembly mounting screws. 5.Grasp the lamp assembly handle and...
Page 63
Maintenance and Troubleshooting Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 53 PREL IMINARY 5.7 Troubleshooting Tips Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the Vision 10/12. If you encounter an issue not described here, please contact your Vidikron dealer or Vidikron Technical Support. Table 5-1. Troubleshooting Chart SymptomPossible Cause(s)Solution The projector does not turn on after initial installation. The Vision 10/12...
Page 64
Maintenance and Troubleshooting 54 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY Notes:
Page 65
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 55 PREL IMINARY 6.1 RS-232 Connection and Port Configuration To interface the Vision 10/12 with a home theater automation/control system or a PC running terminal emulation software, connect it to your control system or PC as shown in Figure 3-12. Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop bit and no flow control. Set the baud rate to 9600, to match that of the Vision 10/12 RS-232 port. 6.2...
Page 66
Serial Communications 56 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY RRD02Selects the LETTERBOX aspect ratioRRDOK RRD03Selects the INTELLIWIDE aspect ratioRRDOK RRD04Selects the CINEMA (2.35:1) aspect ratioRRDOK RRD05Selects the CINEMA FILL aspect ratioRRDOK RRE00Turns the projector OFFRREOK PONTurns the projector ONRandom (Note 2) Table 6-1. Serial Commands (continued) Command Description Reply Notes: 1. All image quality settings must be made with the remote control. After...
Page 67
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 57 PREL IMINARY 7.1 Vision 10/12 Specifications Table 7-1 lists the Vision 10/12 specifications. 7Specifications Table 7-1. Vision 10/12 Specifications Projector Type:Digital Light Processing (DLP), single-chip DMD Native Resolution:Vision Model 10: 1024 x 576 (16:9) Vision Model 12: 1280 x 720 (16:9) Aspect Ratios:4:3, Letterbox, 16:9 Anamorphic, IntelliWide, Cinema, Cinema Fill Video Standards:NTSC, PAL, SECAM Scan Frequency:Horizontal:...
Page 68
Specifications 58 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY +12V Output:0.25 Amps, active when the projector is turned on Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 370 Watts Operating Environment:41°F to 95°F (5°C to 35°C), 0% to 90% humidity (non-condensing) Dimensions:See Figure 7-1 Weight (including lens):27.5 lbs. (12.47 kg) Brightness and Contrast:Cinema Standards Measurement System (CSMS) Specifications - Brightness: 15.9 foot-Lamberts (fL)...
Page 69
Specifications Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 59 PREL IMINARY 7.2 Vision 10/12 Dimensions Figure 7-1 shows the Vision 10/12 dimensions. Figure 7-1. Vision 10/12 Dimensions 398.0mm 181.8mm162.6mm Rear View Side View Side View Bottom ViewFront View 429.4mm 431.6mm 22.8mm 164.6mm 87mm 87mm 164.6mm 408.0mm 231.7mm 166.3mm 16.06in 16.90in 16.99in 15.66in 9.12in 6.48in 6.48in0.89in 3.42in 3.42in 6.40in 7.15in 6.54in 103.9mm4.09in
Page 70
Specifications 60 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY 7.3 Computer Signal Compatibility The Vision 10/12 can display video signals from a variety of computer sources via its RGB-HD and DVI inputs. It is compatible with the three most common sync modes -- sync-on-green, composite sync and RGB with separate sync -- as well as XGA display adapters that use advanced intelligent compression. Table 7-2 lists the signal types that are compatible with the Vision 10/12,...