Vidicode Call Recorder Quad Manual

Call Recorder Quad manual  ©Vidicode 2002 21  according to remote number. Caller ID has to be supported by your service 
provider. Contact your service provider for details. 
4.2 Monitoring 
Monitoring of the telephone lines is a separate feature of the CRQ that allows 
the user to listen in on the recording of the telephone conversations. 
• Press the Monitor function key to open the monitor function. 
The display will show: 
Line Monitor
(press 1-4) STOP
The Monitor function. 
• Press key 1-4 to select...

Call Recorder Quad manual  ©Vidicode 2002  22   

Call Recorder Quad manual  ©Vidicode 2002 23 
5 Recorder settings 
The CRQ features five recording options to be set for each separate line. 
They are the Start Method, Fax Recording, Automatic Gain Control, Speech 
Compression, Notification tone and Caller ID. These options are in the 
Recorder settings menu. Enter the Recorder settings menu by pressing the 
Recorder function key.  
The display will show: 
Install Line 1
NEXT MENU STOP
The Recorder settings menu. 
5.1  The 4 telephone line menus 
The...

Call Recorder Quad manual  ©Vidicode 2002  24   method should be used. The CRQ detects when the connected telephone 
becomes Off-Hook and starts recording.  
• Press CHANGE to switch between Off-Hook and Voice activated. 
In the Voice activated mode the CRQ monitors the line for audio signal and 
recordings are started accordingly. Select Voice activated and press NEXT to 
enter the Signal setting menu. See § 5.2 for a detailed explanation of the 
signal settings. Voice activated recording is...

Call Recorder Quad manual  ©Vidicode 2002 25 
Auto Gain Control: On
NEXT-1 CHANGE BACK
Automatic Gain Control enabled. 
• Press CHANGE to disable or enable Automatic Gain Control. 
The audio levels of the local and remote voice may differ substantially for 
consecutive calls. Therefore the Automatic Gain Control is enabled as a 
standard factory setting. 
• Press NEXT-1 to move on to the next menu item or press key 1-4 to 
move to the Automatic Gain Control setting of the corresponding line. 
5.1.4...

Call Recorder Quad manual  ©Vidicode 2002  26  
Notification tone: Off
NEXT-1 CHANGE BACK
Notification tone disabled. 
• Press CHANGE to enable or disable Notification tone. 
The notification tone is standard disabled. Check local regulations and 
obligations. 
• Press NEXT-1 to move on to the next menu item or press key 1-4 to 
move to the Notification tone setting of the corresponding line. 
5.1.6 Caller ID 
Caller ID will show the telephone number of the remote telephone. Following 
the Notification...

Call Recorder Quad manual  ©Vidicode 2002 27 
5.2 Signal settings 
If you have selected Voice activated recording as Start method pressing 
NEXT will display the Signal Setting. 
The display will show:  
Signal Setting
NEXT-1 CHANGE BACK
The Signal Setting  
• Press CHANGE to alter the signal settings. 
The display will show:  
L1····:··|················
> BACK
The pipeline and semicolon. 
The pipeline (vertical bar |)  indicates the start level for recording, the colon 
(:)  indicates the stop level to...

Call Recorder Quad manual  ©Vidicode 2002  28  
Signal Setting
NEXT-1 CHANGE BACK
The Signal Setting  
• Press NEXT to continue with the Silence Period setting. 
The display will show:  
Silence Period 10s
NEXT-1 CHANGE BACK
The Silence Period setting. 
• Press CHANGE multiple times to alter the Silence Period, after 120 is 
reached it returns to 1. 
Select a value between 1 and 120 seconds. Keep in mind that when a call is 
put on hold the audio level drops and the recording is possibly stopped, when...

Call Recorder Quad manual  ©Vidicode 2002 29 
6  Search and playback of recordings 
All stored recordings can be played back on the CRQ. To play a certain 
recording it has to be found and selected first. To find a recording the CRQ 
has a search function. The search function is described in § 6.2.  
The CRQ also has a simpler and faster way to play the last recorded call. 
Playback of a selected recording is the same as playback of the last recording 
as described in the following paragraph.   
6.1...

Call Recorder Quad manual  ©Vidicode 2002  30    
6.2  Search stored recordings 
The CRQ has a search function to find stored recordings. The search function 
starts with prompting for the date. The search can be further refined by a 
search according to remote number and line number. The entered search 
string for the date will always be preceded by the remote number, which in 
turn precedes the line number. Wildcards can be used to search for remote 
number or line number only. 
• Press the 
 Playback...