Uniden Br330t Wideband Trunktracker Scanner Owners Manual
Here you can view all the pages of manual Uniden Br330t Wideband Trunktracker Scanner Owners Manual. The Uniden manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 81
81 Programming/Editing Optional Settings Editing the System Quick Key J Program System J L 4 Select the system J L 4 Edit Sys Option L Set Quick Key L After selecting this option, select any number from 1-99 to assign the system to a quick key or press to assign the system to no quick key, then press E. Hints: • Access single-digit system Quick Keys by pressing the single digit on the keypad during scanning. Access two-digit system Quick Keys by pressing then both digits. • You can...
Page 82
82 Setting the System Hold Time J Program System J L 4 Select the system J L 4 Edit Sys Option L 4 Set Hold Time L This setting controls how many seconds the scanner scans a system before moving to the next unlocked system. Enter a value from 0-255, then press E to save the setting. Notes: • This setting is available only when a control channel exists in a trunked system. • If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system...
Page 83
83 Programming/Editing Optional Settings scanning. Enter a value from 1-5 or Off, then press E or the scroll control. Notes: • The default setting is 2 seconds for each system. • This setting applies to all channels within the system. Setting ID Scan/Search (Trunked Systems Only) J Program System J L 4 Select the system J L 4 Edit Sys Option L 4 ID Scan/Search L This setting controls how the system will be scanned. Select your setting, then press E. ID Scan - the scanner only stops on...
Page 84
84 Rotate the scroll control to select the fleet map: Preset - select from the 16 most common fleet maps (see “Preset Map 1 Preset Map 2” on Page 133). Press E to select. Custom - allows you to enter a custom fleet map. Enter the size code for each block. Press E to select. Notes: • If you dont know the fleet map for your Motorola Type I system, check the Internet. This information is commonly posted on sites such as those we reference in “Where To Get More Information” on Page 29. • The default...
Page 85
85 Programming/Editing Optional Settings Setting the End Code Operation (Motorola Systems Only) J Program System J L 4 Select the system J L 4 Edit Sys Option L 4 Set End Code L This setting determines how the scanner handles the transmission end code sent by most Motorola systems. Select your setting then press E. Yes - the scanner immediately returns to the control channel when it detects the end code. Ignore - the scanner does not return to the control channel until the carrier drops....
Page 86
86 Setting Emergency Alert (Motorola and EDACS Systems Only) J Program System J L 4 Select the system J L 4 Edit Sys Option L 4 Emergency Alert L Off - the scanner does not alert you to emergency transmissions. Alert 1 - 9 the scanner sounds an alert beep to notify you of the emergency transmission. You can choose any of 9 different beep types. J Set Level Auto - the scanner automatically sets the emergency alert beep to the master volume level. Level 1 - 15 - the scanner adjusts the volume...
Page 87
87 Programming/Editing Optional Settings Reviewing Locked Out Frequencies J Program System J L 4 Select the system J L 4 Edit Sys Option L 4 Rvw ID: Srch L/O L The scanner displays the first locked-out frequency and prompts you to unlock the frequency. Press E to unlock the frequency. Or, rotate the scroll control or press to select a different frequency. To exit the review, press . Clearing All Locked-Out IDs J Program System J L 4 Select the system J L 4 Edit Sys Option L 4 Clr...
Page 88
88 Notes: • The scanner defaults to AFS (agency, fleet, subfleet) format - the format used in most EDACS systems. • See “EDACS Trunking” on Page 27 for more information about the AFS format. Setting System Attenuation (Trunked Systems Only) J Program System J 4 Select the system L 4 Set Attenuator L This setting controls whether the attenuator will be on or off for the current system. Select your setting then press E. Off - the attenuator is off. On - system frequencies are attenuated by...
Page 89
89 Programming/Editing Optional Settings Notes: • Deleted systems cannot be restored. You must re-enter them. • You cannot restore preloaded systems. Copying Systems To copy a system including all settings, groups, and channels: J Program System J 4 Select the system L 4 Copy System L New Sys Name? Enter a name for the copied system, then press E. Group-Level Settings The settings in this section apply to all of the channels stored in the current group. Entering/Editing the Group Name J...
Page 90
90• Each group name can be up to 16 characters. Abbreviate as necessary to fit. • The group and system name alternate in the top line of the display when the scanner stops on a channel. • Press twice to delete the current character. • Press three times to clear the entire alpha tag. Setting the Group Quick Key J Program System J 4 Select the system L 4 Edit Group L Select the group J L 4 Set Quick Key J L After selecting this option, press 0-9 to assign the group to a quick key or press...