Uniden Br330t Wideband Trunktracker Scanner Owners Manual

101
Searching and Storing
Custom Search
Custom Search lets you program and search 10 
custom search ranges. You can search any of these 
ranges simultaneously and select each custom search 
range you set. During custom search, the scanner 
searches starting with the lowest frequency in the 
search range you select to the highest frequency in 
the range.
Notes: 
• Search ranges are preset. See “Editing a Custom 
Search Range” on Page 102 to change the range.
• You cannot turn off all custom search...

102
Editing a Custom Search Range
You can edit up to 10 custom search ranges. The 
names of the custom search ranges appear on the 
display. The default custom search range names 
appear as Custom 1, Custom 2, and so on.
 
J 4 Search for ... J L 
4 
Edit Custom L
Select your setting, then press the scroll control.
Edit Name  - lets you edit the custom search range’s 
name
Edit Srch Limit  - lets you view and select the 
frequency ranges to search. The scanner prompts you 
to enter the upper and lower...

103
Searching and Storing
Notes: 
• You can also lock and unlock a search range by 
pressing         , selecting the search range then 
pressing         + L/O.
• If you select 0, the scanner then searches the 
entire range one time.
• The default setting is 2 seconds for each 
search range.
• The scanner moves to the next system or 
search range after the hold time expires, any 
current transmission ends, and the channel 
delay time expires.
Editing a Service Search
You can change the way service search...

104Notes: 
• Turn on this setting if you are near other strong 
signal sources. Attenuation sometimes helps to 
reduce interference and desensitization that 
strong signals create.
• Even if ATT appears, attenuation might not work if 
the bar antenna is turned on and the tuned fre-
quency is from 0.1 to 1.7 MHz.
•Search with Scan - sets whether the scan-
ner includes the service search during scan-
ning. If unlocked, the scanner first scans all 
selected systems, then searches the selected 
service...

105
Searching and Storing
Selecting a System
To store frequencies or talk group ID’s you find during 
Auto Store, you must first select a system where the 
frequencies or talk group ID’s will be stored.
 
J 4 Search for ... J L 
4 
Search and Store L
4
 Select the system where you want to store the fre-
quencies or talk group IDs 
J L 
If no systems are programmed, No System Stored 
appears. If you have already stored too many systems, 
Over Limit appears.
Storing a Conventional System
You can store...

106
Storing a Trunked System
You can store talk group ID’s into the system you 
selected in “Selecting a System”. Otherwise, the 
scanner stores talk group ID’s in a new group it 
creates.
Note: Trunked system search and store does not work 
if an EDACS SCAT system is selected, a system with 
no frequency is selected, the selected system is 
locked out or the quick key to which the system 
belongs is turned off, and the group you selected to 
store found talk group ID’s contains more talk group 
ID’s...

107
Using the Close Call Feature
Using the Close Call FeatureYour scanners Close CallTM feature lets you set the 
scanner so it detects, displays the frequency of, and 
lets you hear a nearby strong radio transmission. You 
can set the scanner so the Close Call feature works in 
the background while you are scanning other 
frequencies, turn off normal scanning while the Close 
Call feature is working, or turn off the Close Call 
feature and use the scanner normally. You can set the 
scanner so it alerts...

108
Setting Close Call Options
 J 4 Close Call J L 
Select your setting, then press the scroll control. 
Then turn the scroll control to select an option.
•Close Call Only: Lets you set the scanner 
only for Close Call searching. The scanner 
does not scan frequencies or channels when 
this option is turned on. To select this option, 
press E.
•CC Auto Store: Lets you select whether the 
scanner automatically stores Close Call hits 
into channels. If you turn this option on, the 
scanner starts Close...

109
Using the Close Call Feature
hit. The scanner displays CC Found! Press 
Any Key.  When you press a key, the 
frequency appears.
Turn the scroll control to display an option, then 
press the scroll control.
•Set CC Alert: Lets you select how the 
scanner alerts you when it receives a Close 
Call signal. You can select any of the following 
options.
Select Mode
•  Beep (the scanner beeps when it receives a
  Close Call signal)
•  Light (the backlight turns on when it
  receives a Close Call signal)
•...

11 0•Set CC Bands: Lets you select the Close Call 
band settings. You can turn the following bands 
on or off.
VHF Low (25.000 - 107.900 MHz) 
Air Band (108.000 - 136.975 MHz)
VHF High (137.000 - 317.950 MHz)
UHF1 (318.000 - 511.9875 MHz)
UHF2 (512.000 - 763.950 MHz)
800MHz+ (764.0000 - 823.9875 MHz,
                 849.0125 - 868.9875 MHz,
                894.0125 - 1300.0000 MHz)
Use the scroll control to select a band, press 
the scroll control, then use the scroll control to 
select On or Off and...