Toshiba Wt10-a Manual

Chapter 4
Operating Basics This chapter describes the basic operations of your tablet, and highlights
the precautions that should be taken when using it.
Using the Touch Screen You can use your finger to manipulate icons, buttons, menu items, the
onscreen keyboard, and other items on the touch screen. Tap
Simply tap your finger once on the touch screen
to activate an item, such as an app.Press and hold
Press your finger down and leave it there for a
few seconds. This will show information to help
you...

Swipe
Quickly move your finger in from the edge of the
screen, without pausing when you first touch it.
Swipe from the left edge: shows your recently
opened apps, and so on.
Swipe from the right edge: opens or closes the
charms (Search, Share, Start, Devices, Settings).
Swipe from the top edge: opens or closes the
app command bar. For details and more advanced touch screen gestures to interact with
Windows operating system, please refer to Help and Support.
Do not press or push with excess force on the...

Avoid use of the 3D function when under the influence of alcohol.
Please read the user’s manual that comes with the tablet carefully
before using the 3D playback function.
The 3D effect differs between individuals.
Battery This section explains battery types, use, recharging methods and handling.
Battery pack When the AC adaptor is not connected, the tablet's main power source is
this lithium ion battery pack, also referred to in this manual as the main
battery.Real Time Clock (RTC) function
The Real...

Procedures
To recharge the battery pack, connect the AC adaptor to the Micro-USB
port on the tablet and plug the other end into a working outlet.Use only the tablet connected to an AC power source or optional TOSHIBA
Battery charger to charge the battery pack. Never attempt to charge the
battery pack with any other charger.
Charging Time
The following table shows the approximate time required to fully charge a
discharged battery. Please be aware that the charging time when the tablet is on is affected...

In such cases you should follow the steps as detailed below:
1.
Fully discharge the battery by leaving it in the tablet with the power on
until the system automatically turns itself off.
2. Connect the AC adaptor to the Micro-USB port of the tablet, and to a wall outlet that is supplying power.
3. Charge the battery until the battery reaches its full capacity.
Repeat these steps two or three times until the battery recovers normal
capacity.
Monitoring battery capacity Remaining battery power can be...

Battery exhausted time for TOSHIBA WT10-ABattery type
Sleep Mode Shut Down Mode
Battery pack (22.5Wh, 2 cell) about 10 days about 6 weeks
Battery exhausted time for TOSHIBA WT8-B Battery type
Sleep Mode Shut Down Mode
Battery pack (15Wh, 1 cell) about 6 days about 6 weeks Extending battery life
To maximize the life of your battery pack:
At least once a month, disconnect the tablet from a power source and
operate it on battery power until the battery pack fully discharges. Before
doing so, follow the...

accuracy. Specifically, your current location may not be detected in the
following places or situations:
Inside or directly under a building
Inside a bag or box
Among dense trees
When there is an obstacle (person or object) in the front of the
antenna Underground tunnel, underground, or underwater
Buildings streets or residential areas
Near to the high voltage cables
Bad weather such as heavy rain or snow
Memory media The tablet is equipped with a memory media slots that can accommodate
some kinds of...

Memory media format
New media cards are formatted according to specific standards. If you wish
to reformat a media card, be sure to do so with a device that uses media
cards.Formatting a memory media card
Memory media cards are sold already formatted in conformity to specific
standards. If you reformat a memory card, be sure to reformat it with a
device such as digital camera or digital audio player that uses the memory
cards, not with the format command provided within Windows. Should you need to format...

3. Press the memory media gently until it clicks into place.
Figure 4-2 Inserting memory media (TOSHIBA WT10-A) Figure 4-3 Inserting memory media (TOSHIBA WT8-B)
1. Memory media slot
2. Memory media
Product appearance depends on the model you purchased. Make sure the memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able to
remove it. When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to...

USB device
This tablet is equipped with a Micro-USB port that complies with USB 2.0
standard.
You can connect the USB device into the Micro-USB port on your tablet
directly or through the USB port on the provided "USB Data and Charge Y-
Cable" depending on the USB device. Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
As the port operation of all USB devices has not been confirmed, some
USB devices may not...