Toshiba Tdp Xp1u Projector User Manual

41
Others
Before calling service personnel
If you think something is wrong, check the followings before contacting customer service. 
Please see “Trouble indications” p.40 as well.
If This HappensCheck
No power•	 Is	the	power	cord	plugged	in?	Is	it	connected	to	the	projector?	
•	 Is	the	lamp	cover	attached	properly?p.37
Power goes out  
during use
•	 Is	the	ambient	temperature	high?p.40
•	 Is	the	air	intake	or	air	exhaust	blocked?p.40
No picture•	 Is	the	input	source	selected	correctly?	(When	[Auto	input...

42
Specifications
ItemSpecification
Consumption Power280 W
Weight2.2 kg
External Dimensions
(including protruding parts)270 x 98 x 198 mm (W x H x D) 
Cabinet materialPC resin
Conditions for usage environ-
ment
Temp:	5°C	to	35°C; 	relative	humidity: 	80%
Display pixels1 DLP® chip
Picture elements786,432 pixels (1024H × 768V)
LensZoom lens      F=2.4-2.6   f=21.81-23.77 mm
LampHigh-pressure mercury lamp (200 W)
Projection screen size23.9-300 inches
Projection distance1.0m - 11m
Speaker2 W 
CONTROL...

43
Others
■ List of supported signals (RGB signals)
This projector supports the following RGB signals. Note, however, that depending on the 
computer model, the screen may show flicker or streaking. Please adjust the projector if 
this happens.
Resolution ModeRefresh rate 
[Hz] H-frequency 
[KHz] Clock 
(MHz)
640x480 VGA_60
59.9431.4625.17
VGA_72 72.837.86 31.5
VGA_75 7537.5 31.5
VGA_85 8543.26 36
720x400 720x400_70
7031.5 32
720x400_85 85.0337.92 35.5
800x600 SVGA_56
56.2535.15 36
SVGA_60 60.337.87 40...

44
■ List	of	supported	signals	(Component	signals)
Signal formatfh(kHz)fv(Hz)
480i (525i)@60Hz 15.7359.94
480p (525p)@60Hz 31.4759.94
576i (625i)@50Hz 15.6350.00
576p (625p)@50Hz 31.2550.00
720p (750p)@60Hz 45.0060.00
720p (750p)@50Hz 37.5050.00
1080i (1125i)@60Hz 33.7560.00
1080i (1125i)@50Hz 28.1350.00
■ List of supported signals (Video, S-Video signals)
Video modefh(kHz)fv(Hz) fsc(MHz)
NTSC 15.7360 3.58
PAL 15.6350 4.43
SECAM 15.63504.25 or 4.41
PAL-M 15.7360 3.58
PAL-N 15.6350 3.58
PAL-60 15.7360...

45
Others
■ CONTROL	terminal
●	 Pin	assignment
9
5 1
6
 
Notes
•	 Contact	your	dealer	for	control	cable	and	commands.
Pin No. Signal NameDescription
1N.C∗
2TXDSending data
3RXDReceiving data
4N.C∗
5GNDSignal ground
6N.C∗
7N.C∗
8N.C∗
9N.C∗
∗ Do not connect anything.
D-Sub 9 pin connector 

English
OWNER’S MANUAL
TDP-XP1
In the spaces provided below, record the Model and Serial No. located at the bottom of 
your projector.
Model No.                                       Serial No.                                  
Retain this information for future reference.
DATA PROJECTOR
Français
Español
Deutsch