Toshiba Tdp Xp1u Projector User Manual
Have a look at the manual Toshiba Tdp Xp1u Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 38
38
5 Mount the new lamp.
Align the orientation, press down the new lamp
until the bottom is reached, and lock in place using
the two lamp locking screws.
6 Replace the lamp cover.
Align the cover, and press it in, then tighten the
screws loosened in step 3 until the lamp cover
is no longer loose. (Be sure to replace the lamp
cover.)
7 Reset the lamp time.
See the lamp’s manual for instructions on resetting
the lamp time.
Notes and Precautions
• The [Lamp time] item in the Status display menu...](http://img.usermanuals.tech/thumb/76/97034/w64_toshiba-tdp-xp1u-manual_d-37.png "Page 38
38
5 Mount the new lamp.
Align the orientation, press down the new lamp
until the bottom is reached, and lock in place using
the two lamp locking screws.
6 Replace the lamp cover.
Align the cover, and press it in, then tighten the
screws loosened in step 3 until the lamp cover
is no longer loose. (Be sure to replace the lamp
cover.)
7 Reset the lamp time.
See the lamp’s manual for instructions on resetting
the lamp time.
Notes and Precautions
• The [Lamp time] item in the Status display menu...")
![Page 43
43
Others
■ List of supported signals (RGB signals)
This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
Resolution ModeRefresh rate
[Hz] H-frequency
[KHz] Clock
(MHz)
640x480 VGA_60
59.9431.4625.17
VGA_72 72.837.86 31.5
VGA_75 7537.5 31.5
VGA_85 8543.26 36
720x400 720x400_70
7031.5 32
720x400_85 85.0337.92 35.5
800x600 SVGA_56
56.2535.15 36
SVGA_60 60.337.87 40...](http://img.usermanuals.tech/thumb/76/97034/w64_toshiba-tdp-xp1u-manual_d-42.png "Page 43
43
Others
■ List of supported signals (RGB signals)
This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
Resolution ModeRefresh rate
[Hz] H-frequency
[KHz] Clock
(MHz)
640x480 VGA_60
59.9431.4625.17
VGA_72 72.837.86 31.5
VGA_75 7537.5 31.5
VGA_85 8543.26 36
720x400 720x400_70
7031.5 32
720x400_85 85.0337.92 35.5
800x600 SVGA_56
56.2535.15 36
SVGA_60 60.337.87 40...")
41 Others Before calling service personnel If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.40 as well. If This HappensCheck No power• Is the power cord plugged in? Is it connected to the projector? • Is the lamp cover attached properly?p.37 Power goes out during use • Is the ambient temperature high?p.40 • Is the air intake or air exhaust blocked?p.40 No picture• Is the input source selected correctly? (When [Auto input search] is [Off]) p.26 • Is the mute function on?p.29 • Is the brightness setting minimized?p.32 • Are the connections set up correctly?p.23 • Are all the connected devices functioning properly? No audio• Is the mute function on?p.29 • Is the volume setting minimized? p.27 • Are the connections set up correctly?p.23 • Are all the connected devices functioning properly? Picture not displayed correctly • Is the input signal supported by the projector?p.43,p.44 • Is there something generating an abnormal video signal, for instance the video tape? Picture blurred Part of picture out of focus • Is the lens dirty?p.39 • Is the lens focus adjusted optimally?p.27 • Is the projection distance within the projector’s supported range? p.22 • Is the projector’s screen placement angle tilted too far?p.22 • Are the sharpness or sampling phase adjustments off? Image is dark• Are the brightness or contrast adjustments off?p.32 • Is the lamp nearing the end of its service life?p.35 Colors too light Bad shading • Are the color, tint adjustments off?p.32 • Is the screen dirty? • Is the lamp nearing the end of its service life?p.35 Remote control doesn’t work • Is the remote control’s battery drained? • Is the battery inserted into the remote control correctly?p.20 • Is the remote control being used within the effective range?p.20 • Are there any obstructions between the remote control and projector? • Are there any fluorescent or other bright lights shining at the projector’s infrared remote sensor?
42 Specifications ItemSpecification Consumption Power280 W Weight2.2 kg External Dimensions (including protruding parts)270 x 98 x 198 mm (W x H x D) Cabinet materialPC resin Conditions for usage environ- ment Temp: 5°C to 35°C; relative humidity: 80% Display pixels1 DLP® chip Picture elements786,432 pixels (1024H × 768V) LensZoom lens F=2.4-2.6 f=21.81-23.77 mm LampHigh-pressure mercury lamp (200 W) Projection screen size23.9-300 inches Projection distance1.0m - 11m Speaker2 W CONTROL terminalRS-232C: D-Sub 9 pin COMPUTER(Y/PB/PR) IN terminalMini D sub 15 pin Analog RGB / Y/PB/PR (dual use) VIDEO terminalS-VIDEO: Mini DIN 4 pin VIDEO: RCA Pin Jack AUDIO: 3.5mm dia. stereo mini-jack MONITOR terminalMini D sub 15 pin RGB / Y/PB/PR (dual use) AUDIO OUT terminal3.5mm dia. stereo mini-jack Notes • This model complies with the above specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. ■ Separately sold product Replacement Lamp Model: TLPLV10 Connection terminal ■ List of general specifications
43 Others ■ List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. Resolution ModeRefresh rate [Hz] H-frequency [KHz] Clock (MHz) 640x480 VGA_60 59.9431.4625.17 VGA_72 72.837.86 31.5 VGA_75 7537.5 31.5 VGA_85 8543.26 36 720x400 720x400_70 7031.5 32 720x400_85 85.0337.92 35.5 800x600 SVGA_56 56.2535.15 36 SVGA_60 60.337.87 40 SVGA_72 72.1848.07 50 SVGA_75 7546.87 49.5 SVGA_85 85.0653.6756.25 1024x768 XGA_60 6048.36 65 XGA_70 70.06 56.47 75 XGA_75 75.0260.0278.75 XGA_85 84.9968.67 94.5 1280x1024 1280x1024_60 60.0263.98 108 1152x864 1152x864_70 7063.85 90.3 1152x864_75 7567.5 108 1280x960 1280x960_60 6060108 832x624 MAC 16” 74.5549.725 57.28 1024x768 MAC 19” 7560.24 79.85 1152x870 MAC75.0668.68 81 640x480 MAC G4 6031.35 40 1024x768 i Mac DV 756079 1152x870 i Mac DV 7568.49 80.05 Note • Signals of which resolution exceeds the native resolution (1024 × 768 pixels) will be compressed. For this reason, some information may be lost, or image quality may be affected.
44 ■ List of supported signals (Component signals) Signal formatfh(kHz)fv(Hz) 480i (525i)@60Hz 15.7359.94 480p (525p)@60Hz 31.4759.94 576i (625i)@50Hz 15.6350.00 576p (625p)@50Hz 31.2550.00 720p (750p)@60Hz 45.0060.00 720p (750p)@50Hz 37.5050.00 1080i (1125i)@60Hz 33.7560.00 1080i (1125i)@50Hz 28.1350.00 ■ List of supported signals (Video, S-Video signals) Video modefh(kHz)fv(Hz) fsc(MHz) NTSC 15.7360 3.58 PAL 15.6350 4.43 SECAM 15.63504.25 or 4.41 PAL-M 15.7360 3.58 PAL-N 15.6350 3.58 PAL-60 15.7360 4.43 NTSC4.43 15.7360 4.43 ■ Pin assignment of COMPUTER IN & MONITOR terminals 1115 6 15 10 Mini D sub 15 Pin connector Input Signal• RGB input RGB signals: 0.7V (p-p) 75 Ω Horizontal sync signal: TTL level (Pos/neg polarity) Vertical sync signal: TTL level (Pos/neg polarity)• Y/PB/PR input Y signal: 1.0V (p-p) 75 Ω PB/PR signals: 0.7V (p-p) 75 Ω Pin No. Pin description During RGB inputDuring Y/PB/PR input 1Video signal (R)Color difference signal (PR) 2Video signal (G)Luminance signal (Y) 3Video signal (B)Color difference signal (PB) 4N.C∗ 5GND∗ 6GND (R)GND (PR) 7GND (G)GND (Y) 8GND (B)GND (PB) 9+5V∗ 10GND∗ 11N.C∗ 12SDA∗ 13Horizontal sync signal∗ 14Vertical sync signal∗ 15SCL∗ ∗ Do not connect anything. Specifications (Continued)
45 Others ■ CONTROL terminal ● Pin assignment 9 5 1 6 Notes • Contact your dealer for control cable and commands. Pin No. Signal NameDescription 1N.C∗ 2TXDSending data 3RXDReceiving data 4N.C∗ 5GNDSignal ground 6N.C∗ 7N.C∗ 8N.C∗ 9N.C∗ ∗ Do not connect anything. D-Sub 9 pin connector
English OWNER’S MANUAL TDP-XP1 In the spaces provided below, record the Model and Serial No. located at the bottom of your projector. Model No. Serial No. Retain this information for future reference. DATA PROJECTOR Français Español Deutsch