Toshiba Tdp Tw90au Projector User Manual

41
Operations
40
•Subnet mask
A subnet mask is used to determine what subnet the IP address assigned to a
terminal belongs to. (Example: 255.255.xxx.xxx)
•Gateway
This value specifies the device, such as a router, to be used to access servers outside
the network. It is identified by the IP address. (Example: 111.112.xxx.xxx)
•[Setting initialization]
This item resets the wireless LAN settings to their factory defaults.
•[Projector name]
This can be used to identify projectors when communicating with...

43
Operations
42
Projecting images stored in a memory PC cardThis projector can read JPEG files from a memory PC card to display them on the screen.
This allows you to give presentations without a computer, create an advertising screen
board using the slideshow function, and more. (The projector cannot reproduce animation
effects such as those produced by Microsoft
® PowerPoint
®.)
■Memory PC cards●PC card slot types
The PC card slot installed on this projector is TYPE II (PCMCIA Release 2.1)-compliant....

45
Operations
44
Projecting images stored in a memory PC card (Continued)•[Interval]
You can set the display interval of time (in seconds or minutes) for slide shows to be
played automatically.
•[Display effect]
When playing a slide show, the projector can give various display effects or transitions
to each slide being displayed.
The transitions available are listed below:•None
Display each slide normally.•Wipe
Display the next slide gradually upward (Wipe ↑), downward (Wipe ↓), to the left
(Wipe ←), or...

47
Operations
46
Projecting images stored in a memory PC card (Continued)
2
Searching for a target file•Use the 
 
 
 
 buttons to move the orange frame over the desired file or folder.
•If there are multiple pages of thumbnails, click the 
 button on the bottom row to go to
the next page, and the 
 button on the top row to go to the previous page.
•To open a folder, move the orange frame to the desired folder and press the 
 button.
You can navigate down up to 5 levels using the same procedure.
Pressing...

49
Operations
48
Checking the projector status Installing the applications■Status display
To check the current status of the projector, select Status display in step 2 in
“Projector settings” 
p.36
. The following items of information will then be displayed.

The name of the application currently running on the projector is displayed.
(Examples: Slide Show, Wireless Utility)

When no card is plugged ➔“Type” is displayed.
When a memory PC card is plugged ➔
“Type
/Free space/Status” are displayed.
When a...

51
Operations
50
Using the Wireless Utility■Displaying a computer’s screen via the projector1
Launch the Wireless Utility
software application.When the Wireless Utility launches, the Screen
Image transmission mode window appears on
the computer screen.
To switch to the Screen Image transmission
mode window from another mode (File or
Projector Camera), click on the Screen Image
icon 
.
2
Select Transmission  mode.Click on Update automatically or Update manually. See step 
6 for the meanings of
Update...

53
Operations
52
Using the Wireless Utility (Continued)■
Displaying a JPEG image saved on a computer via the projector
1
Launch the Wireless Utility software application.The Screen Image transmission mode window appears on the computer’s screen.
2
Click on the File icon 
.
The Wireless Utility
window changes to File
transmission mode.
3
Click on the Browse button, and
select the file to send.Clicking on the Browse button displays the Open
dialog box. Select the file to send, then click on
the Open...

55
Operations
54
Using the Wireless Utility (Continued)3
Select the projector to be operated.In the Remote Control  window, click on the 
 button, and
select the desired projector from the pull-down list. The remote
control screen will then change to the new one as shown on the
r ight. Only one projector can be selected. (It is not possible to
operate multiple projectors.)
4
Click on the Remote Control window’s buttons.The function of each button and box is as follows:
Power On :Turns projector power...

57
Operations
56
How to use the JPEG Conversion Tool (Continued)■Converting files created with Microsoft
® PowerPoint
®
This process provides presentations without using a computer by converting
presentation files created with Microsoft
® PowerPoint
® into JPEG files, storing them on
a memory PC card, and displaying them in a slide show.
•To use this conversion mode, Microsoft
® PowerPoint
® must be installed on the
computer.
•Only static images are supported by this process. Animation and audio are not...

59
Operations
58
Setting up the projector using a Web browser■How to use the “Projector Configuration Tool”
The “Projector Configuration Tool” uses the Web server features of the projector to
set up the projector using a wireless LAN PC card.
When using the “Projector Configuration Tool”, set up the wireless LAN connecting
the projector and the computer.
1
See “Checking the projector status” 
p.48
 to display
information on the screen and write down the IP address.
2
Invoke Internet Explorer.Internet...