Toshiba Tdp Tw90au Projector User Manual

21
20
Preparations
p.71
Before connection•Read the owner’s manual of the device you are connecting to the projector.
•Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal 
p.69
, etc.
•Turn off the power of both devices before connecting.
•The figure below is a sample connection. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Notes
•COMPUTER terminals 1...

23
Operations
22
■ Connecting the power cord1
Insert the power cord connector into the
AC IN socket of the projector.
2
Insert the power cord plug into a wall or
other power outlet.
■ Turning the power on1
Turn on the main power
switch.The ON indicator will change to
orange, indicating standby mode.
2
Press the ON/STANDBY
button.The power turns on, and the following
3 green indicators light: ON, LAMP,
and FAN. After a moment, the start-up
screen appears.
Start-up screen Control panelRemote
Control
Notes...

25
Operations
24
1
Turn on the power.Turn on the power by following the instructions in “Turning the power on” 
p.22
.
2
 Select the language and the lamp power (When using the
first time).When the projector is used for the first time after purchase, menu for language and
lamp power selection and configuration is displayed in English. (If the screen is out of
focus, adjust it according to the step 
6.)
qUse the 
 or 
 button to select the
desired language and press the 
 button.
Message for setup...

27
Operations
26
■Using auto setting
This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.1
Press the SET UP button.The Set up menu appears.
2
Press the SET UP button again.The menu item is automatically adjusted/set.
For computer input, the 
 icon will appear during
processing.
For manual adjustment and setting, see the following table 
p.27
.
Note•The image may not be projected or auto adjustment/setting may not be performed
correctly for...

29
Operations
28
Using handy features (Continued)■Cutting off the picture and sound temporarily (Mute)
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector’s images and sound can be
turned off.
Press the remote control’s MUTE button.The picture and sound are cut off. (The Mute function is released
when pressing the MUTE button again.)Notes•The 
 icon will appear while mute is in effect.
•Operating any other functions will also cancel the muting....

31
Operations
30
■The image adjustment menuUse this menu to adjust image-related items.Items that can be adjusted are marked with  “Yes”, and those that cannot are marked with “No”.
Item    
  
Description
Computer
Y/P
B/PR
Video PCS-video card
 
ContrastAdjust the image contrast. Yes Yes Yes Yes
Lower
Higher
BrightnessAdjust the brightness of the image. Yes Yes Yes Yes
Darker
Brighter
ColorAdjust the color of the image. No Yes Yes No
Lighter
Deeper
Tint 
*1
Adjust the tint of the image color. No No Yes...

33
Operations
32
Using the menu (Continued)
■Displaying Information (Status display)
This displays information about the input signal, lamp use time, etc.
“Yes”: displayed, “No”: not displayed
Item Description
Computer Y/P
B/PR
Video PCS-video card
Input Input source name Yes Yes Yes YesMode nameRGB input mode 
[Note 1]
Ye s N o N o N o
H-resolutionHorizontal resolution (in dots) Yes No No NoV-resolution Ve rtical resolution (in dots) Yes No No NoH-frequency Horizontal sync frequency Yes No No...

35
Operations
34
Setting up the wireless LAN■Functions
The following functions are available via wireless communications, when the wireless LAN
PC card and dedicated Wireless Utility software 
p.50
 included with this projector are used.
Note: A wireless LAN PC card except the supplied one (or recommended by
Toshiba) does not work with this product.  Please ask your dealer about the
available wireless LAN PC card.
1) Displaying a computer’s screen via the projector
The computer’s desktop screen can be...

37
Operations
36
Setting up the wireless LAN (Continued)■Setup using the Wireless/Card menu●Projector settings (Be sure to read this subsection.)
The factory settings can be used as-is. However, if you need higher security, the
projector settings should be changed.
1. Press the MENU button twice
2. Select a Category
3. Make settings
The menu disappears.5. End
    
Press the MENU 
    button
Select a category by using
           .
The following three categories 
are available:Displays the current settings...

39
Operations
38
Setting up the wireless LAN (Continued)■Setting up the network
If you select Network in step 2 in “Projector settings” 
p.36
, the following items can be set.
Description Item
Mode
Channel
SSID
Encryption
Key
DHCP
TCP/IP
Setting 
initialization
Projector  
name
Other
Ad hoc           Infrastructure 
Use           to select the number (1 to 11) to be set.
Specify an arbitrary character string (1 to 32 characters). 
[     : Enter the setting mode]    [          : Move from digit to digit]...