Toshiba Tdp Tw350uk Projector User Manual

21
Preparations
20
Operating a computer using the remote controlA computer can be operated using the projector’s remote control.  This function is available
on any computer with the Windows 98/98SE, Windows Me, Windows 2000, or Windows XP
OS, that is equipped with a USB port which can support USB1.1 (The mouse remote
control receiver is also supported on OS 9 or OS X for the Macintosh).  However, please
note that Toshiba does not guarantee the operation of all computers.1
Connecting a computerConnect the...

23
Preparations
22
Placement StylesAs shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the
Default setting menu 
p.44
, in accordance with your needs.
Placement
 WARNING
•Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
•If you wish...

25
Preparations
24
Notes
•When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
•Output volume of AUDIO OUT terminal can be adjusted by the VOL button. Connecting with AV equipment
DVD video recorder, etc.DVD video recorder,
DVD player, etc.Audio amplifier, etc.
DVD video recorder, etc. Video recorder,
DVD player, etc.Video recorder, etc.
To DVI output
Conversion
adapter BNC-pin
(not supplied)
To  Y/C
B/CR output
Green (Y)/Blue
(C
B)/Red (C
R)
DVI cable-29 pin
(not...

27
Operations
26
■Connecting the power cord1
Insert the power cord connector into
the AC IN socket of the projector.
2
Insert the power cord plug into a
wall or other power outlet.
■ Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
•The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed 
p.28
.
•Y ou can disable the beep sound in the  Display setting...

29
Operations
28
5
Projector placement angle adjustmentsThe placement angle and the height of the projected image can be adjuste\
d by the foot
adjuster.qLift up the front of the projector to
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
w To fine adjust the angle, twist the
f oot adjuster.
e To adjust the horizontal angle, use
the tilt adjuster.
To  stow the foot adjuster, hold up the projector while pressing the foot...

31
Operations
30
■Correcting the keystone distortion
When the projector placement angle against the screen is changed while p\
rojecting the
image, the picture will undergo keystone (trapezoidal) distortion.This projector is capable of correcting this keystone
distortion
.
1
Press the KEYSTONE button.The  Keystone  menu appears. By default, [ Auto keystone ] is selected.
Item Description
Automatically corrects vertical and horizontal keystone distortion.
Press      .
Screen shrinking at bottom...

33
Operations
32
■
Cutting off the picture and sound temporarily (Mute)When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector’s images and sound can be
turned off.
Press the remote control’s MUTE button.The picture and sound are cut off. (The Mute function is released
when pressing the MUTE button again.)Notes•The 
 icon will appear while mute is in effect.
•Operating any other functions will also cancel the muting.
■Changing picture mode
The...

35
Operations
34
■Displaying two screens (SPLIT function)
This function displays two screens at a time.
Press the remote control’s SPLIT button.The projected image moves to the left (main
screen), and a new image is displayed to
the right (sub screen). To switch the sub and
main screens, press the remote controls
SWAP button.
To hide the sub screen, press the SPLIT
button again.Notes•Sound of the main screen is output.
•Size of the screens and input source of the sub screen can be changed in the
SPLIT...

37
Operations
36
How to set password (from [Off] to [On])
1
Select [Password] in the Default setting menu and press the 
 or 
button.The password setting confirmation screen is displayed. ([OK] or [Cancel])
2
Select [OK] and press the 
 button.
The password entry screen is displayed.
3
Enter a four-digit number for the password using numeric keys of the
remote control.The input number appears as [****].
4
Re-enter the same password for confirmation.When the password is confirmed, the setting is complete...

39
Operations
38
■The image adjustment menuUse this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked,
it indicates that you cannot select for the current input.)
Description
Digital (DVI)
Analog (D-SUB)(BNC)
    Item 
  
RGB Y/P
B/PRRGB Y/P
B/PRVideo
S-video PC card USB
 
ContrastAdjust the image contrast. Yes Yes Yes Yes Yes Yes Yes Yes
Lower
Higher
BrightnessAdjust the brightness of...