Toshiba Tdp Tw100u Projector User Manual

81
Maintenance
80
12
4
4
Pull out the lamp.Loosen the three lamp locking screws, pull up the
handle, and remove the lamp.
5
Mount the new lamp.Align the orientation, press down the new lamp
until the bottom is reached, and lock in place using
the three lamp locking screws.
6
Replace the lamp cover.Align the cover, and press it in, then tighten the
screws loosened in step 
3 until the lamp cover is
no longer loose.
7
Reset the lamp timer.See the lamp’s manual for instructions on resetting
the lamp...

83
Others
82
The indicator lights to inform you of internal abnormalities.
No power
⇒Problem with projector
•Unplug the power cord, and contact your dealer.Lamp went out during use, or won’t come on⇒Lamp temperature is high so that it is difficult to turn on, the lifetime of the
lamp has ended or the projector is malfunctioning.
•Unplug the power cord and wait for a short while, then turn the power
back on.
•If a lamp burns out, replace it with a new one.
❈After approx. one minute of abnormal display,...

85
Others
84
If you think something is wrong, check the followings before contacting customer service.
Please see “Trouble indications ” 
p.83
 as well.
If  This Happens Check
No powerPower goes out
during useNo pictureNo audioPicture not
displayed
correctlyPicture blurred
Part of picture
out of focusImage is darkColors too light
Bad shadingControl panel
key doesn’t workRemote control
doesn’t workBefore calling service personnel
• Is the power cord plugged in? Is it connected to the projector?
• Is the...

87
Others
86
■List of supported signals (RGB signals)This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
Resolution
720 x 400
640 x 480
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1400 x 1050
1600 x 1200Mode
720x400_85
VGA_60
VGA_72
VGA_75
VGA_85
SVGA_56
SVGA_60
SVGA_72
SVGA_75
SVGA_85
MAC16
XGA_60
XGA_70
XGA_75
XGA_85
MAC19
SXGA1_75
QuadVGA_60...

88
89
Others
Specifications (Continued)
■CONTROL terminal●Pin assignment
7
6
8
5
43
21
Signal Name
RXD
CTS
DSR
GND
RTS
N.C
TXD
GND Pin No.
1
2
3
4
5
6
7
8Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
Signal ground
Mini DIN 8 pin connector
●Interface format
1Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:  1 bit
2Communication format STX (02h)  Command (3Byte)  ETX (03h)
Only 1 command valid per...

Items Settings (default in bold)/Description
BLACK OVERPRINT
TEXT/GRAPHIC, TEXT/OFF
Specify whether black objects are printed
(superimposed) on a neighboring color in order to
prevent white space around black characters or
figures.
If TEXT/GRAPHIC is selected, superimposed printing
is applied to text and graphics.
If TEXT is selected, superimposed printing is applied
to text.
PCL CR/LF MAPPING
CR=CR LF=LF/CR=CRLF LF=LF/CR=CR LF=LFCR/
CR=CRLF LF=LFCR
Select the definitions of the CR/LF codes in the PCL...

Items Settings (default in bold)/Description
PAPER DEFAULT
PAPERPAPER SIZE
LETTER, LEGAL, EXECUTIVE, A4, A5, A6, B5(JIS), B6(JIS),
GOVT LETTER, STATEMENT, FOLIO, SP FOLIO, UK
QUARTO, FOOLSCAP, GOVT LEGAL, 16K, PHOTO
4×6
*2, KAI 16, KAI 32, ENV C6, ENV DL, ENV MONARCH,
ENV CHOU#3, ENV CHOU#4, B5(ISO), ENV #10, JPOST,
JPOST-D, 8 1/8x13 1/4, 8 1/2x13 1/2, CUSTOM
Select the size of media that is normally used.
CUSTOM SIZE Specify the media size when PAPER SIZE is set to
CUSTOM.
The setting units can be...

Items Settings (default in bold)/Description
STARTUP
OPTIONSDO STARTUP PAGE
ON/OFF
Select whether or not a startup page is printed when
the printer is turned on.
AUTO CONTINUE
ON/OFF
Select whether or not printing continues if the size or
type of media in the selected tray is different from the
size or type of media for the print job.
If AUTO CONTINUE is set to ON, printing automatically
continues after about 10 seconds under the following
conditions. At this time, printing will be performed
even if the...

Items Settings (default in bold)/Description
SECURITY CHANGE PASSWORD Specify the password for locking the control panel.
If the password is set to 0000 (default), the control
panel is not locked. In order to lock the control panel,
be sure to specify a password other than 0000.
LOCK PANEL
OFF/MINIMUM/ON
Specify how the control panel is locked.
If OFF is selected, the control panel is not locked.
If MINIMUM is selected, the INTERFACE MENU and SYS
DEFAULT MENU are protected with a password.
If ON is...