Toshiba Tdp Tw100u Projector User Manual

21
20
Preparations
Placement StylesAs shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the
Default setting menu 
p.41
, in accordance with your needs.
Placement
 WARNING
•Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
•If you wish...

23 22
Preparations
p.89
Audio amplifier, etc. DVD video recorder, etc.Video recorder,
DVD player, etc.
Video recorder, etc.
Conversion
adapter BNC-pin
(not supplied)
Monitor cable Mini
D-sub 15P-BNC
(not supplied)
To audio input
White (L)/Red (R)To audio
output
White (L)/
Red (R)
AV  cable
(not supplied)S-video cable
(not supplied)To S-video
output
To video
output
Before connection•Read the owner’s manual of the device you are connecting to the projector.
•Some types of computer cannot be used or...

25
Operations
24
Notes
•The start-up screen will disappear after a moment. You can dismiss the star t-up screen
before this by performing any operation. You can also configure the start-up screen not to
appear via the Display setting menu 
p.38
.
•The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed 
p.26
.
•When [Key lock] is [On], the operation buttons of the projector do not work 
p.43
.
•When [Password] is [On], enter password then the...

27
Operations
26
5
Projector placement angle adjustmentsThe placement angle and the height of the projected image can be adjusted by the foot
adjuster.qLift up the front of the projector to
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
wTo fine adjust the angle, twist the
foot adjuster.
eTo adjust the horizontal angle, use
the right and left tilt adjusters.•To stow the foot adjuster, hold up the projector while pressing...

29
Operations
28
■Using auto setting 
(Only for input from computer)
This function automatically adjusts the projector settings such as
sampling phase, frequency, screen position, and clamp for each
type of the input signal by using simple operations.
Press the remote control’s AUTO SET button.For computer input, the 
 icon will appear during processing.
You can set as well by selecting [Auto setting] in the Image
adjustment menu 
p.36
.
Notes•The image may not be projected or auto adjustment/setting may...

31
Operations
30
Remote
Control
3
To move the area to zoom in, use the 
 
 
 
buttons.You can keep pressing.
4
To reset the zoom, press the RETURN button.The image is reset to the original size.Notes•The 
 icon appears while resizing.
•Operating a function other than Mute will release resizing.
•As zooming is processed digitally, the image quality is degraded in larger zoom
ratio.
•During resizing or moving the zooming area, the image may be distorted.
■Cutting off the picture and sound temporarily...

33
Operations
32
■Password function
When the password function is added and [Password] is set to [On], image projection
requires an entry of the preset password at power-on.
To add the password function, perform the following procedure:
(The password function, once added, cannot be deleted. Set [Password] to [Off] if you
do not want to use it after addition.)
Notes: • This password is different from that for the wireless LAN.
•When adding the password function, switch the input to other than Wireless or...

35
Operations
34
You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons 
p.16
 on the control panel (main unit side) and remote control.
■How to use the menus
The menu shown below is for operation instructions purposes and might differ from the
actual display.
Using the menus
Toggle items with            . 
Select items with             and press       . 
Fix selection with       .
Display the Setting display menu.
1. Press the MENU button
2. Select...

37
Operations
36
Item 
  
Description
Computer Y/P
B/PRVideo
S-videoWireless/
USB
Position
 FrequencyYe s N o NoNo No
Adjust to eliminate periodic patterns and
flickering when many fine vertical lines
appear on the screen. H-positionYe s N o NoNo No
Adjust the horizontal position of the image. V-positionYe s N o NoNo No
Adjust the vertical position of the image. Clamp 1Ye s N o NoNo No
Adjusts the clamp pulse position. Clamp 2Ye s N o NoNo No
Adjusts the clamp pulse width.
*1: [Noise reduction] may not...

39
Operations
38
Note
•If you use the screen size setting function on commercial video software,
broadcast or cable-broadcasting programs to display images with the varying
aspect ratio except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.[Blackboard mode]Projects the image in colors more like projecting on a screen.
Precaution•The projected image may differ depending on the type, color, and material of the
blackboard and wall even if...