Toshiba Tdp T8 Projector User Manual
Have a look at the manual Toshiba Tdp T8 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
42 ■ List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. Resolution ModeRefresh rate [Hz]H-frequency [KHz]Clock (MHz) 640x480 VGA_6059.9431.4625.17 VGA_7272.837.8631.5 VGA_757537.531.5 VGA_858543.2636 720x400720x400_707031.532 720x400_8585.0337.9235.5 800x600 SVGA_5656.2535.1536 SVGA_6060.337.8740 SVGA_7272.1848.0750 SVGA_757546.8749.5 SVGA_8585.0653.6756.25 1024x768 XGA_60 6048.3665 XGA_7070.06 56.4775 XGA_7575.0260.0278.75 XGA_8584.9968.6794.5 1280x10241280x1024_6060.0263.98108 1280x1024_7575.0279.97135 1152x864 1152x864_707063.8590.3 1152x864_757567.5108 1152x864_8584.9977.09130 1280x9601280x960_606060108 1280x960_757575120 1400x1050 SXGA +6063.98118 832x624MAC 16”74.5549.72557.28 1024x768MAC 19”7560.2479.85 1152x870MAC75.0668.6881 640x480MAC G46031.3540 1024x768i Mac DV756079 1152x870i Mac DV 7568.4980.05 1280x960i Mac DV7575120 Note • Signals which resolution exceeds the native resolution (1024 × 768 pixels) will be compressed. For this reason, some information may be lost, or image quality may be affected. Specifications (Continued)
43 Others ■ List of supported signals (Y/PB/PR signals) Signal formatfh(kHz)fv(Hz) 480i(525i)@60Hz15.7359.94 480p(525p)@60Hz31.4759.94 576i(625i)@50Hz15.6350.00 576p(625p)@50Hz31.2550.00 720p(750p)@60Hz45.0060.00 720p(750p)@50Hz37.5050.00 1080i(1125i)@60Hz33.7560.00 1080i(1125i)@50Hz28.1350.00 * * ■ List of supported signals (Video, S-Video signals) Video modefh(kHz)fv(Hz)fsc(MHz) NTSC15.73603.58 PA L15.63504.43 SECAM15.63504.25 or 4.41 PAL-M15.73603.58 PAL-N15.63503.58 PAL-6015.73604.43 NTSC4.4315.73604.43 ■ Pin assignment of COMPUTER IN & MONITOR terminals 1115 6 15 10 Input Signal • RGB input RGB signals: 0.7V (p-p) 75 Ω Horizontal sync signal: TTL level (Pos/neg polarity) Vertical sync signal: TTL level (Pos/neg polarity) • Y/P B/PR input Y signal: 1.0V (p-p) 75 Ω PB/PR signals: 0.7V (p-p) 75 Ω Mini D sub 15 Pin connector Pin No.Pin descriptionDuring RGB inputDuring Y/PB/PR input 1Video signal (R)Color difference signal (PR)2Video signal (G)Luminance signal (Y)3Video signal (B)Color difference signal (PB)4N.C∗5GND∗6GND (R)GND (PR)7GND (G)GND (Y)8GND (B)GND (PB)9+5V∗10GND∗11N.C∗12SDA∗13Horizontal sync signal∗14Vertical sync signal∗15SCL∗ ∗ Do not connect anything.
44 ■ CONTROL terminal ● Pin assignment 7 68 5 4 3 21 Signal NameRXD N.C N.C GND N.C N.C TXD GNDPin No. 1 2 3 4 5 6 7 8 Descr iption Receiving data No connection No connection Signal ground No connection No connection Sending data Signal ground Mini DIN 8 pin connector Notes • Contact your dealer for control cable and commands.