Toshiba Tdp T8 Projector User Manual

							
12

REMOTE CONTROL BATTERIES
Caution
•  Never throw batteries into a fire.
Notes
•  Be sure to use AA size batteries.
•  Dispose of batteries in a designated disposal area.
•  Attention should be drawn to the environmental aspects of battery disposal.
•  Do not mix different battery types or combine used batteries with new ones.
•  If  the  remote  control  does  not  operate  correctly,  or  if  the  operating  range  becomes  re
-duced, replace both batteries with new ones.
•  If  the  batteries  are  dead  or  if  you  will  not  be  using  the  remote  control  for  a  long  time,  re-move the batteries to prevent battery acid from leaking into the battery compartment.
Using  the  batteries  improperly  may  cause  them  to  explode  or  leak  and  lead  to  burn  or  in-
jury.  If  battery-leaking  fluid  contacts  skin,  wash  the  fluid  off  immediately  with  clean  water 
and consult a doctor. If the fluid is spilt on an instrument, avoid contact and wipe it off using 
tissue paper.
(Dispose of the used tissue paper as flammable garbage after moistening with water.) 
						

							
13

Before Using

CONTENTS
Before Using
SAFETY PRECAUTIONS ..................................................................................................2
IMPORTANT SAFETY INSTRUCTIONS ...........................................................................4
POWER SUPPLY CORD SELECTION .............................................................................9
IMPORTANT PRECAUTIONS ...........................................................................................9
EXEMPTION CLAUSES ..................................................................................................10
OTHER CAUTIONS AND INFORMATIONS  ....................................................................11
REMOTE CONTROL BATTERIES ..................................................................................12
Preparations
Checking the package contents .......................................................................................15
Names of each part on the main unit  ...............................................................................16
Names of each part on the control panel and remote control  ..........................................17
Parts on the rear panel ....................................................................................................18
Preparing and using the remote control  ...........................................................................19
Placement ........................................................................................................................20
Connection  .......................................................................................................................22
Operations
Turning the power on and off  ...........................................................................................23
Basic operations ..............................................................................................................25
Using handy features  .......................................................................................................27
Using auto setting .........................................................................................................27
Correcting the keystone distortion  ................................................................................27
Cutting off the picture and sound temporarily (Mute)  ...................................................28
Freezing the image (Freeze) ........................................................................................28
Password function ........................................................................................................28
Using the menus ..............................................................................................................30
How to use the menus  ..................................................................................................30
The image adjustment menu  ........................................................................................31
The display setting menu ..............................................................................................32
The default setting menu ..............................................................................................33
Displaying Information (Status display)  ........................................................................34
Maintenance
About lamp .......................................................................................................................35
Lamp replacement  ...........................................................................................................35
Lens and main unit cleaning  ............................................................................................38
Others
Trouble indications ...........................................................................................................39
Before calling service personnel  ......................................................................................40
Specifications ...................................................................................................................
41
List of general specifications ..........................................................................................
41 
						

							
14
Separately sold product ................................................................................................41
List of supported signals (RGB signals)  .......................................................................42
List of supported signals (Y/PB/PR signals)  .................................................................43
List of supported signals (Video, S-Video signals)  .......................................................43
Pin assignment of COMPUTER IN & MONITOR terminals ..........................................43
CONTROL terminal ......................................................................................................44 
						

							
15
Preparations
Separately sold product ................................................................................................41
List of supported signals (RGB signals)  .......................................................................42
List of supported signals (Y/PB/PR signals)  .................................................................43
List of supported signals (Video, S-Video signals)  .......................................................43
Pin assignment of COMPUTER IN & MONITOR terminals ..........................................43
CONTROL terminal ......................................................................................................44
Checking the package contents
 The Supplied CD-ROM
The supplied CD-ROM contains an owner’s manual, including information not available for the printed Owner’s manual (Getting started) and Acrobat® Reader™ to view the manual.
  Installing Acrobat® Reader™
Windows®: Run the CD-ROM, select the Reader/English folder, and run ar500enu.exe.Follow the on-screen instructions.
Macintosh:  Run  the  CD-ROM,  select  the  Reader/English  folder,  and  run  Reader  In-staller. Follow the on-screen instructions to install the software.
  Viewing the manual
Run  the  CD-ROM  and  double-click  on Start.pdf.  Acrobat®  Reader™  launches,  and  the 
menu  screen  of  the  Owner’s  manual  appears.  Click  on  your  language.  The  Owner’s  Manual cover and list of bookmarks appear. Click on a bookmark title to view thatsection of the manual. Click on p. to view a reference page with related information.See the Help menu for more information about Acrobat® Reader™.
Please make sure that the following items are included in the box, along with the main unit. If any item is missing, please contact the store immediately where you purchased the prod-uct.
(1)  (5) 
(2)  (6)
(3)  (7) 
(4) 
 (1) Remote control
 (2)  R6 (SIZE AA) batteries for remote 
control (2)
 (3) CD-ROM
 (4) Owner’s Manual
 (5) RGB cable (3m)
 (6) Power cord (See note)
 (7) Carrying bag
NoteThe shape and number of supplied power cords vary depending on the product destination. 
						

							
16

Names of each part on the main unit
BackFront
(10)(11)
(9)
(8)
(8)
(13)
(6)
(1)
(4) (3)(2)
(5)
(7)(12)(14) (15)
  Name  :  Function
(1)  Lens  :  Projects expanded image. 
(2)  Infrared remote sensor  :  Senses commands from the remote control. 
p.19
(3)  Foot adjuster release button  :  Press to set up or stow the foot adjuster. p.24
(4)  Air exhaust  :  Expels air that has grown hot inside the projector.
(5)  Control panel  :  Operates the projector. p.17
(6)  Zooming lever :  Adjusts screen size. p.24
(7)  Focusing Ring :  Adjusts screen focus. p.24
(8)  Air intake :  Draws in air from outside the projector.
(9)  AC IN socket  : Connect the supplied power cord here.
(10)  Rear panel :  Connects external devices. p.17
(11)  Antitheft lock hole :  Attach a safety cable or any other antitheft device.
(12)  Speaker :  Outputs audio sound.
(13)  Tilt adjuster :  Adjusts the projector’s horizontal tilt. p.24
(14)  Lamp cover :  Remove to replace lamp. p.36
(15)  Foot adjuster :  Adjusts the vertical projection angle. p.24 
						

							
17

Preparations

Names of each part on the control panel and remote control
Control panelRemote Control
  Name :  Main Function
Control panel
(1)  ENTER button  :  Accepts the selected mode.
(2)  MENU button :  Displays menus. p.30
(3)  KEYSTONE button  :  Adjusts keystone distortion. p.27
(4)  ON/STANDBY button  :  Turns the power on/off (standby). p.24
(5)  INPUT button :  Selects input. p.25
(6)  Selection button  :  Menu selections and adjustments. p.30
(7)  LAMP indicator  :  Displays lamp mode. p.24
(8)  POWER indicator  :  Displays power on/off mode. p.24
(9)  TEMP indicator  :  Lights when internal temperature too high. p.39
Remote control
(1)  ENTER button  :  Accepts the selected mode.
(2)  MENU button :  Displays menus. p.30
(3)  KEYSTONE button  :  Adjusts keystone distortion. p.27
(4)  ON/STANDBY button  :  Turns the power on/off (standby). p.24
(5)  INPUT button :  Selects input. p.25
(6)  Selection button  : Menu selections and adjustments. p.30
(10)  AUTO SET button  :  Sets up analog input from computer. p.27
(11)  MUTE button :  Cuts off the picture and sound temporarily. p.28
(12)  FREEZE button  :  Pauses image. p.28
 
(1)
(2)
(3)
(4)
(5)
(6)
(9)(8)(7)
POWER
KEYSTONE +
KEYSTONE -(3)
 CAUTION•  Do not look into the laser light source of the remote control or direct the laser pointer toward a person or a mirror. 
•  Handling and adjusting other 
than described here may lead to dangerous exposure to laser.
Remote controltransmitter
( 11)
(5)
(2)
(6)(1)
(4)
(10)
(3)
Batterycover
(12) 
						

							
18

Parts on the rear panel
  Name :  Main Function
(1)  MONITOR terminal  :  Connect to a computer display, etc.
(2)  COMPUTER IN terminal  :  Input analog RGB signal from a computer or other 
source, or a component video signal (Y/PB/PR) from 
video equipment.
(3)  S-VIDEO terminal  : Input S video signals from video equipment.   
(4)  VIDEO terminal  : Input video signals from video equipment.
(5)  AUDIO IN terminal  : Input audio signals.
(6)  CONTROL terminal 
       RS232C  :When operating the projector via a computer, 
connect this to the controlling computer’s RS-232C 
port. p.44
(7)  AUDIO OUT terminal  : Outputs audio signals.
(8)  Antitheft lock hole   : Attach a safety cable or any other antitheft device.
(1)(2)(3)(4)(5)(6)
(7)(8) 
						

							
19

Preparations

Preparing and using the remote control
■  Operating the remote 
control
Point toward the projector’s 
infrared remote sensor, and press a 
button on the remote control.
•  Operating the projector from the front
Approx. 15 Approx. 5mApprox. 5m
■  Loading dry-cell batteries 
into the remote control
  Remove the battery cover.
  Insert the dry-cell batteries.
Be sure to align the plus and minus 
ends of the batteries properly.
Two batteries (R6, SIZE AA) are used.
  Replace the battery cover.
 Dry-cell batteries
•  Before using the batteries, be sure to observe the Safety Precautions described in previous pages.
•  Remove batteries from remote control when not using for extended periods.
•  If the remote control stops working, or if its range decreases, replace all the batteries with 
new ones.
 The remote control
•  The remote control may fail to operate if the infrared remote sensor is exposed to bright  sunlight or fluorescent lighting.
•  Do not drop or bang.
•  Do not leave in hot or humid locations.
•  Do not get wet or place on top of wet objects.
•  Do not take apart.
•  In rare cases, ambient conditions could impede the operation of the remote control. If this 
happens, point the remote control at the main unit again, and repeat the operation. 
						

							
20

Placement
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [
Projection mode] in the 
Default setting menu p.33, in accordance with your needs.
 WARNING•  Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus resulting in injury.
•  If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the 
projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge. Improper mounting could cause the projector to fall, resulting in an accident.
•  If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let 
everyone involved with the use of the projector know that fact.
Floor-mounted front projection 
Floor-mounted rear projection 
Ceiling-mounted front projection 
Ceiling-mounted rear projection  
						

							
21

Preparations

Projection Distance and Size
Use the figures, tables, and formulas below to determine the projection size and projection 
distance. (Projection sizes are approximate values for full-size picture with no keystone 
adjustment.)
ScreenAs seen from above
As seen from the side
a is the distance (m) between the lens and the screen, and corresponds to a range of  
1.36 m to 11 m. H is the height from the image bottom to the center of the lens.
90 
a
90 H
Lens center
a (min length) =         projection size (inches)
   25.3807
a (max length) =        projection size (inches)
   23.0947
projectionsize (inches)
projection distance a (m)height (H)(cm)
min length(zooming max)
max length(zooming min)34.671.361.507.9
401.571.739.1
602.362.6013.7
803.153.4618.3
1003.944.3322.9
1505.906.4934.3
2007.878.6545.7
2509.8410.8257.2
254.22101158.1