Toshiba Strata Vi Telephone User Guide

You may listen to background music via the station’s
speaker if music-on-hold is available on your system
by depressing the -1 key. Control the volume
level with the control on the right side of your
,telephone.
TO AUTOMATICALLY DIAL A FREQUENTLY
CALLED NUMBER
3 Lift the handset.
0 Depress an available m line key.
@ Listen for dial tone.
@ Dial the q key.
@ Dial the two-digit number that corresponds
to the desired telephone number.
@ STRATA VI will automatically dial the number
for you.
@ Hang up when...

AUTOMATIC DIALING (continuedl
e Depress the q key.
s Dial the two-digit number that corresponds to the
second telephone number to be dialed.
Q Repeat the above steps for each subsequent
number to be dialed.
8 STRATA VI will automatically dial the number
for you.
e Hang up when the call is completed. the first sets of numbers 
dial’ed during the
multz$le dial will be repeated by the automatic redial.
TO OUTPUT b!il AND q TONES
When the special’ q or q tones must be output
for computer input service or...

TOSHIBA:TELEPHONE NUMBER 
(continued)
STORAGE
Q Remove the handset from its hook (do not ac-
tivate a 
[col or llNTl line)
c Dial the q and q keys, respectively.
0 Dial a Z-digit address code. Codes run
consecutively from GO through 83 
(GOthrough 
99 if optional card is installed).
0 Dial the telephone number to be stored.
after the trunk access code to allow for dial tone delay.
Press the 
-1 key after entering the PBX access code.
@ Dial the fl key to record the number in memory.
@ Repeat the above...

TOSHIBA
PAGING
TO PAGEQ Lift the handset
0 Depress an available m key and dial
one of the following:
w EKT speakers only.
q External speakers only.
q Both 
EKT and external speakers.
0 Make your announcement in a normal
voice level and repeat it.
0 Hang ~:p when you have completed your
announcement.
OVERRIDETO MARE A BUSY OVERRIDE CALL
@ After reaching a busy station, you may signal that
station that a call is waiting by dialing 
12).
@ A tone signal will be heard at the busy station.
TO MARE A DND...

TONE SIGNALLINGPROGRAMMABLE OPTION
TONE SIGNALLING
c You will hear a ringing tone as the
primary method of intercom call signalling .
c Handsfree answerback is inoperative.
2 Voice call can be accomplished by dialing q
.-_-___ .-~---. -/
LA-: L’..,/--.---~-.---
BUSY LAMP FIELD (BLF)
OPTIONAL TELEPHONE
‘C Automatically indicates which stations are in use.
EXECUTIVE TELEPHONE(continued) 
/ 

TOSHIBA
EXECUTIVE TELEPHONE (continued)KEY FUNCTIONSThe optional executive telephone 
@O-key EKT)provides, via ten additional feature keys; seven 
one-button automatic-dialing (AD 
I-7) telephone numbers,
automatic-redial, pause and automatic-dialing access.
The optional 
EKT has 24 line and feature keys and a
push-button dial pad. The following is a general
description of each additional key.
AUTOMATIC-DIALING 
KEYS j-i6?lOne-key automatic-dialing for seven different
telephone numbers after accessing a...

TOSHIBAEXECUTIVE TELEPHONE (continued)
AUTOMXTIC DIALING
TO AUTOMATICALLY DIAL A FREQUENTLY CALLED
NUMBER
Telephone numbers can be accessed by each of the AD 1
through 7 keys or one of the 2-d&t access codes in the usualSTRATA VI manner.
B Lift the handset.
a Depress an available m line key.
s Listen for dial tone.
GJ Depress the IAD key (or depress the /REP( key and dialthe Z-digit number) that corresponds to the desired
telephone number.
@ STRATA VI will automatically dial the number for
you.
TO...

rEXECUTIVE TELEPHONE (continued)
TELEPHONE NUMBER
STORAGE
TO STORE TELEPHONE NUMBERS
e Lift the handset (do not activate a CO or INT line).
e Depress the m and m keys, respectively.
o Depress one of the m keys or dial a Z-digit address
code (codes run consecutively from IO through 49:
AD numbers reside at 
43-491.
* Dial telephone number to be stored.
It is necessary to insert a pause after the trunk access code
to allow for dial tone delay. Depress the 
m key after
entering the PBX access code. If a PBX...

Address Code11
13
1415
21
22
26
27
36
37
38
39
41
44
45
47
48
49Phone Number