Home
>
Toshiba
>
Communications System
>
Toshiba Strata Dk14, Dk40i, Dk424 General Description Manual
Toshiba Strata Dk14, Dk40i, Dk424 General Description Manual
Here you can view all the pages of manual Toshiba Strata Dk14, Dk40i, Dk424 General Description Manual. The Toshiba manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 21
Strata DK14 System Technology Strata DK General Description 5/997 System Technology Pulse Code Modulation Digital switching talkpaths enable all CO and intercom lines to be accessed simultaneously. Analog-to-digital and digital-to-analog conversion is done by CODECs (coder plus decoder) on station and CO line PCBs. Custom Electronic Circuitry Large Scale Integration (LSI) technology makes the Strata DK14 circuit designs simple and efficient. Gate arrays using very large scale integration save...
Page 22
Strata DK14 Maintenance and Programming 8Strata DK General Description 5/99 Maintenance and Programming Hardware maintenance and repair procedures describe how to quickly locate, remove, and replace defective parts and PCBs. System programming can be performed without taking the system out- of-service. On-site programming can be executed with any 20-button proprietary LCD telephone or with a DKAdmin PC connected to an optional maintenance port. Off-site programming with DKAdmin, which can help...
Page 23
Strata DK General Description 5/999 Strata DK40i2 This chapter provides an overview of the Strata DK40i System and its capacities. The Strata DK40i Base Key Service Unit (KSU) is a compact system that provides many of the features offered by much larger systems. The KSU is designed for convenient wall-mounting and occupies very little space (see Figure 4 and Ta b l e 4.) Station and CO Lines The DK40i Base KSU comes equipped with eight digital telephone station circuits. One of three optional...
Page 24
Strata DK40i Peripherals 10Strata DK General Description 5/99 Peripherals The DK40i Base KSU can support a number of peripherals, which are not considered as stations or lines and do not affect the maximum station and line capacities. The DK40i Base KSU comes standard with built-in interfaces for connecting the following dealer-supplied equipment: an amplifier and speaker for paging and night ringing, Music-on-Hold (MOH) source, reserve power batteries, and emergency standard telephone for system...
Page 25
Strata DK40i Base KSU Architecture Strata DK General Description 5/9911 Base KSU Architecture The Strata DK40i Base KSU contains the main processor, operating software, circuitry and the following components (see Figure 6). Figure 6 Base KSU Interior Digital Telephone Circuits The main circuit board (TMAU2) in the Strata DK40i Base KSU has eight integrated circuits that can connect to Toshiba-proprietary digital telephones (including the cordless telephone), Stand- alone Data Interface Units...
Page 27
Strata DK40i Base KSU Architecture Strata DK General Description 5/9913 Only one TSIU can be installed per DK40i system. When the TSIU PCB is installed, the PIOU can still be installed for zone paging, control relays, and an SMDR RS-232 interface, built-in (IMDU) maintenance modem, or an SMDI or maintenance interface. Power Supply The power supply generates +5VDC and -24VDC for the entire system, even in its expanded configuration. (See Ta b l e 5 for a summary of electrical/environmental...
Page 28
Strata DK40i Expansion KSU Architecture 14Strata DK General Description 5/99 Power Failure Interface The Base KSU provides an interface for a dedicated backup standard telephone during an AC input power failure. If the system AC input power fails, the backup telephone automatically connects to the CO1 line. The backup telephone is disabled when the system operates during normal power conditions. This feature is independent of Battery Backup and is available when loop start lines are installed in...
Page 29
Strata DK40i Typical Line Configurations Strata DK General Description 5/9915 Typical Line Configurations This section shows the maximum basic and CO configurations that are possible with the DK40i. There is a variety of configuration combinations of digital and standard telephones with CO lines, including loop start, ground start, Tie, and DID lines. Any loop or ground start CO line can be equipped with Caller ID. DK40i Line and Station Capacity The following table shows maximum capacity for a...
Page 30
Strata DK40i Functional Block Diagram 16Strata DK General Description 5/99 Functional Block Diagram See Figure 8 shows the Strata DK40i Base and Expansion KSU PCBs and the available lines, stations and peripherals. Basic voltage and cabling information is also included. Figure 8 Functional Block Diagram _ + Amp Interface Box DIUPOWERREADYCONNECT • • • TCIU2 U Uor TBSU Night Bell, BGM Mute or MOH (Control Relay) Digital Telephone and Add-on Module AA Digital Announcer TCOU Line OnlyMOH/BGM Source...