Toshiba Satellite L300 L305 Maintenance Manual
Here you can view all the pages of manual Toshiba Satellite L300 L305 Maintenance Manual. The Toshiba manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 191
![Page 191
4 Replacement Procedures 4.16 CCD Board and MIC
4.16 CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figu\
re 4-31.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
CCD module
CCD cable
MIC cable
Display rear cover
Figure 4-31 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
4-52 Satellite...](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-190.png "Page 191
4 Replacement Procedures 4.16 CCD Board and MIC
4.16 CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figu\
re 4-31.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
CCD module
CCD cable
MIC cable
Display rear cover
Figure 4-31 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
4-52 Satellite...")
4 Replacement Procedures 4.16 CCD Board and MIC 4.16 CCD Board and MIC Removing the CCD Board and MIC Remove the FL inverter board according to the following procedures and Figu\ re 4-31. 1. Remove the CCD module with CCD cable from display rear cover. 2. Disconnect the CCD cable from the CCD module connector. CCD module CCD cable MIC cable Display rear cover Figure 4-31 Removing the CCD board and MIC 3. Lift the MIC from the display rear cover. 4-52 Satellite...
Page 192
![Page 192
4.16 CCD Board and MIC 4 Replacement Procedures
Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual 4-53
Installing the CCD Board and MIC
Install the FL inverter board according to the following procedures and \
Figure 4-31.
1. Connect the CCD module cable to CCD module connector.
2. Seat the CCD module, MIC in the correct position.](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-191.png "Page 192
4.16 CCD Board and MIC 4 Replacement Procedures
Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual 4-53
Installing the CCD Board and MIC
Install the FL inverter board according to the following procedures and \
Figure 4-31.
1. Connect the CCD module cable to CCD module connector.
2. Seat the CCD module, MIC in the correct position.")
4.16 CCD Board and MIC 4 Replacement Procedures Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual 4-53 Installing the CCD Board and MIC Install the FL inverter board according to the following procedures and \ Figure 4-31. 1. Connect the CCD module cable to CCD module connector. 2. Seat the CCD module, MIC in the correct position.
Page 193
![Page 193
4 Replacement Procedures 4.17 Speaker
4.17 Speakers
Removing the Speakers
Remove the Speakers according to the following procedures and Figure 4-32. \
1. Remove two M2x3 black flat head screw securing the left speaker.
2. Remove two M2x3 black flat head screws securing the right speaker.
3. Remove the left and right speakers.
M2x3 black flat head screw
Left speaker Right speaker
Speaker cable
Figure 4-32 Removing the speakers
Installing the Speakers
Install the speakers according to the...](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-192.png "Page 193
4 Replacement Procedures 4.17 Speaker
4.17 Speakers
Removing the Speakers
Remove the Speakers according to the following procedures and Figure 4-32. \
1. Remove two M2x3 black flat head screw securing the left speaker.
2. Remove two M2x3 black flat head screws securing the right speaker.
3. Remove the left and right speakers.
M2x3 black flat head screw
Left speaker Right speaker
Speaker cable
Figure 4-32 Removing the speakers
Installing the Speakers
Install the speakers according to the...")
4 Replacement Procedures 4.17 Speaker 4.17 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4-32. \ 1. Remove two M2x3 black flat head screw securing the left speaker. 2. Remove two M2x3 black flat head screws securing the right speaker. 3. Remove the left and right speakers. M2x3 black flat head screw Left speaker Right speaker Speaker cable Figure 4-32 Removing the speakers Installing the Speakers Install the speakers according to the...
Page 194
![Page 194
4.18 Touch Pad and Button Board 4 Replacement Procedures
4.18 Touch Pad and Button Board
Removing the Touch Pad and Button Board
Remove the touch pad and button board according to the following procedures\
and Figure 4-
33.
1. Disconnect the touch pad flat cables from CN5000 on the button board and touch
pad.
2. Remove two M2x3 black flat head screws securing the button board.
3. Disconnect the button board flat cable from CN5001 on the button board.
4. Remove eight M2x3 black flat head screws...](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-193.png "Page 194
4.18 Touch Pad and Button Board 4 Replacement Procedures
4.18 Touch Pad and Button Board
Removing the Touch Pad and Button Board
Remove the touch pad and button board according to the following procedures\
and Figure 4-
33.
1. Disconnect the touch pad flat cables from CN5000 on the button board and touch
pad.
2. Remove two M2x3 black flat head screws securing the button board.
3. Disconnect the button board flat cable from CN5001 on the button board.
4. Remove eight M2x3 black flat head screws...")
4.18 Touch Pad and Button Board 4 Replacement Procedures 4.18 Touch Pad and Button Board Removing the Touch Pad and Button Board Remove the touch pad and button board according to the following procedures\ and Figure 4- 33. 1. Disconnect the touch pad flat cables from CN5000 on the button board and touch pad. 2. Remove two M2x3 black flat head screws securing the button board. 3. Disconnect the button board flat cable from CN5001 on the button board. 4. Remove eight M2x3 black flat head screws...
Page 195
![Page 195
4 Replacement Procedures 4.18 Touch Pad and Button Board
4-56 Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual
Installing the Touch Pad and Button Board
Install the touch pad and button board accordi ng to the following procedures and Figure 4-33.
1. Seat the touch pad, touch pad bracket in the correct position and secure\
it with the
eight M2x3 black flat head screws.
2. Connect the button board flat cable to CN5001 on the button...](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-194.png "Page 195
4 Replacement Procedures 4.18 Touch Pad and Button Board
4-56 Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual
Installing the Touch Pad and Button Board
Install the touch pad and button board accordi ng to the following procedures and Figure 4-33.
1. Seat the touch pad, touch pad bracket in the correct position and secure\
it with the
eight M2x3 black flat head screws.
2. Connect the button board flat cable to CN5001 on the button...")
4 Replacement Procedures 4.18 Touch Pad and Button Board 4-56 Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual Installing the Touch Pad and Button Board Install the touch pad and button board accordi ng to the following procedures and Figure 4-33. 1. Seat the touch pad, touch pad bracket in the correct position and secure\ it with the eight M2x3 black flat head screws. 2. Connect the button board flat cable to CN5001 on the button...
Page 196
![Page 196
4.20 USB Cable, CRT Cable, Power Button Board, 4 Replacement Procedures
AC-IN cable and RJ11 Cable
4.19 USB cable, CRT cable, Power Button Board, AC-IN cable and
RJ11 cable
Removing USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable
Remove the USB cable, CRT cable, Power Button board, AC-IN cable and RJ11 c\
able
according to the following procedures and Figure 4-34.
1. Remove the RJ11 cable.
2. Remove two M2.5x4 black flat head screw securing the CRT...](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-195.png "Page 196
4.20 USB Cable, CRT Cable, Power Button Board, 4 Replacement Procedures
AC-IN cable and RJ11 Cable
4.19 USB cable, CRT cable, Power Button Board, AC-IN cable and
RJ11 cable
Removing USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable
Remove the USB cable, CRT cable, Power Button board, AC-IN cable and RJ11 c\
able
according to the following procedures and Figure 4-34.
1. Remove the RJ11 cable.
2. Remove two M2.5x4 black flat head screw securing the CRT...")
4.20 USB Cable, CRT Cable, Power Button Board, 4 Replacement Procedures AC-IN cable and RJ11 Cable 4.19 USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable Removing USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable Remove the USB cable, CRT cable, Power Button board, AC-IN cable and RJ11 c\ able according to the following procedures and Figure 4-34. 1. Remove the RJ11 cable. 2. Remove two M2.5x4 black flat head screw securing the CRT...
Page 197
![Page 197
4 Replacement Procedures 4.20 USB Cable, CRT Cable, Power Button Board, AC-
IN cable and RJ11 cable
4-58 Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual
Installing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable
Install the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ\
11 cable to the
following procedures and Figure 4-34.
1. Seat the power button board in the correct position.
2....](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-196.png "Page 197
4 Replacement Procedures 4.20 USB Cable, CRT Cable, Power Button Board, AC-
IN cable and RJ11 cable
4-58 Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual
Installing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable
Install the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ\
11 cable to the
following procedures and Figure 4-34.
1. Seat the power button board in the correct position.
2....")
4 Replacement Procedures 4.20 USB Cable, CRT Cable, Power Button Board, AC- IN cable and RJ11 cable 4-58 Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual Installing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable Install the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ\ 11 cable to the following procedures and Figure 4-34. 1. Seat the power button board in the correct position. 2....
Page 198
6000 1次 Appendices
Page 199
![Page 199
Appendices
App-ii Satellite L300/L305/Satellite Pro L300/EQUIUM L300/SATEGO L300 Maintenance Manual
Appendix Contents
Appendix A Handling the LCD Module........................................................................\
.. A-1
Appendix B Board Layout........................................................................\
.........................B-1
B.1 System Board Front View ........................................................................\
..............B-1
B.2...](http://img.usermanuals.tech/thumb/76/49004/w300_toshiba-satellite-l300-l305-maintenance-manual-198.png "Page 199
Appendices
App-ii Satellite L300/L305/Satellite Pro L300/EQUIUM L300/SATEGO L300 Maintenance Manual
Appendix Contents
Appendix A Handling the LCD Module........................................................................\
.. A-1
Appendix B Board Layout........................................................................\
.........................B-1
B.1 System Board Front View ........................................................................\
..............B-1
B.2...")
Appendices App-ii Satellite L300/L305/Satellite Pro L300/EQUIUM L300/SATEGO L300 Maintenance Manual Appendix Contents Appendix A Handling the LCD Module........................................................................\ .. A-1 Appendix B Board Layout........................................................................\ .........................B-1 B.1 System Board Front View ........................................................................\ ..............B-1 B.2...
Page 200
Appendices Satellite L300/L305/Satellite Pro L300/EQUIUM L300/SATEGO L300 Maintenance Manual App-iii C.24 CN508 Bridge Media Slot Connector (21-Pin) ............................................ C-17 C.25 CN510 Broadcom Decoder Connector (52-Pin) .......................................... C-17 C.26 JACK500 RJ45 LAN Connector (12-Pin) ....................................................... C-18 C.27 JACK501 Head Phone Connector (6-Pin)...