Toshiba Satellite C55-b Manual

							When the computer is in Sleep Mode, the Power indicator will blink
white.
If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode -
Sleep Mode will consume more power while the computer is off.
Sleep Mode limitations
Sleep Mode will not function under the following conditions:
Power is turned back on immediately after shutting down.
Memory circuits are exposed to static electricity or electrical noise.
Hibernation Mode The Hibernation Mode feature saves the contents of memory to the Hard
Disk Drive when the computer is turned off so that, the next time it is turned
on, the previous state is restored. Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to thecomputer.
Save your data. While entering Hibernation Mode, the computer saves
the contents of memory to the Hard Disk Drive. However, for safety
sake, it is best to save your data manually.
Data will be lost if you disconnect the AC adaptor before the save is completed.
Do not switch to Hibernation Mode while transferring data to externalmedia, such as USB devices, memory media or other externalmemory devices, as data will be lost.
Benefits of Hibernation Mode
The Hibernation Mode feature provides the following benefits:
Saves data to the Hard Disk Drive when the computer automatically
shuts down because of a low battery condition.
You can return to your previous working environment immediately
when you turn on the computer.
Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by theSystem Hibernate feature.
Allows the use of the panel power off feature.
Starting Hibernation Mode
To enter Hibernation Mode, click  Start, point to the arrow (  ) beside the
Shut down  button and then select  Hibernate from the menu.
User's Manual
2-9 
						

							Automatic Hibernation Mode
The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1. Click  Start -> Control Panel -> System and Security -> Power 
Options .
2. Click  Choose what the power button does  or Choose what 
closing the lid does .
3. Enable the desired Hibernation Mode settings for  When I press the 
power button  and When I close the lid .
4. Click the  Save changes  button.
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the Hard Disk Drive.
After you turn off the computer, and the content of memory has been saved to the Hard Disk Drive, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.User's Manual 2-10 
						

							Chapter 3
The Grand Tour This chapter identifies the various components of the computer - it is
recommended that you become familiar with each before you operate the
computer.
Legal Footnote (Non-applicable Icons)
For more information regarding Non-applicable Icons, please refer to the Legal Footnotes  section.Please handle your computer carefully to avoid scratching or damaging the
surface.
Front with the display closed
The following figure shows the front of the computer with the display panel
in the closed position.
Figure 3-1 Front of the computer with display panel closed
1. Memory media slot*3. Wireless communication indicator2. DC IN/Battery indicator 
* One Memory media slot is provided either on the front or on the left side of your
computer.
Product appearance depends on the model you purchased.
Memory media slotThis slot lets you insert an SD™/SDHC™/
SDXC™ memory card, miniSD™/microSD™
Card and MultiMediaCard™. Refer to the
Memory media  section for more information.Keep foreign metal objects, such as screws, staples and paper clips, out of
the Memory media slot. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.User's Manual 3-1123   
						

							DC IN/Battery
indicatorThe  DC IN/Battery  indicator shows the condition
of the DC IN and the battery's charge - white
indicates the battery is fully charged while the
power is being correctly supplied from the AC
power adaptor.
Please refer to the  Power Condition Descriptions
section for more information on this feature.Wireless
communication
indicatorThe  Wireless communication  indicator glows
amber when the Bluetooth or Wireless LAN
functions are turned on.
Only some models are equipped with Bluetooth
and Wireless LAN functions.
Left side
The following figure shows the left side of the computer. Figure 3-2 The left side of the computer
1. DC IN 19V jack4. Optical disc drive*2. LAN jack5. Cooling vents*3. Universal Serial Bus (USB 2.0) port6. Memory media slot**
* Provided with some models.
** One Memory media slot is provided either on the front or on the left side of your
computer.
Product appearance depends on the model you purchased.
User's Manual 3-2  1432 1532 16532  
						

							DC IN 19V jackThe AC adaptor connects to this jack in order topower the computer and charge its internal
batteries. Please note that you should only use
the model of AC adaptor supplied with the computer at the time of purchase - using the
wrong AC adaptor can cause damage to the
computer.LAN jackThis jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), or Fast
Ethernet LAN (100 megabits per second,
100BASE-TX). Some models are equipped with
a Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Refer to  Operating
Basics , for details.Do not connect any cable other than a LAN cable to the LAN jack. It could
cause damage or malfunction.Universal Serial Bus
(USB 2.0) portOne Universal Serial Bus port, which complies to
the USB 2.0 standard, is provided on the left side
of the computer.
The USB 2.0 port is not compatible with USB 3.0 devices.Please note that it is not possible to confirm the operation of all
functions of all USB devices that are available. Some functions
associated with a specific device might not operate properly.
Before removing a USB device from the USB port of your computer,
click the  Safely Remove Hardware and Eject Media  icon on the
Windows Taskbar, and then select the USB device that you want to remove.
Keep foreign metal objects, such as screws, staples and paper clips, out of
the USB port. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.Optical disc driveThe computer may be configured with a DVD
Super Multi drive or Blu-ray™ Writer drive.2.6GB and 5.2GB DVD-RAM media cannot be read from or written to.User's Manual 3-3    
						

							Cooling ventsThe cooling vents help the processor to avoidoverheating.Memory media slotThis slot lets you insert an SD™/SDHC™/ SDXC™ memory card, miniSD™/microSD™
Card and MultiMediaCard™. Refer to the
Memory media  section for more information.
Right side
The following figure shows the right side of the computer. Figure 3-3 The right side of the computer
1. Headphone/Microphone combo jack5. External RGB monitor port*2. Universal Serial Bus (USB 3.0) port6. Cooling vents*3. Universal Serial Bus (USB 2.0 or 3.0)
port7. Security lock slot4. HDMI out port 
* Provided with some models.
Product appearance depends on the model you purchased.
Headphone/
Microphone combo
jackA 3.5 mm mini headphone/microphone combo
jack enables connection of a monaural
microphone or a stereo headphone.Universal Serial Bus
(USB 3.0) portOne Universal Serial Bus port, which complies to
the USB 3.0 standard, is provided on the right
side of the computer.
The USB 3.0 port is compliant with USB 3.0
standard and backward compatible with USB 2.0 devices.
The port with the icon ( 
 ) has Sleep and Charge
function.
USB 3.0 port(s) may work as USB 2.0 port(s) when operating in USB Legacy Emulation mode.User's Manual 3-4 1745632     
						

							Universal Serial Bus
(USB 2.0 or 3.0) portOne Universal Serial Bus port, which complies to
the USB 2.0 or 3.0 standard, is provided on the
right side of the computer.
The USB port type may vary depending on the
model you purchased. The port with blue color is
USB 3.0 port.HDMI out portHDMI out port can connect with Type A
connector HDMI cable.External RGB monitor
portThis port provides 15-pin, analog RGB port. Please refer to the  External RGB monitor port pin
assignment  section for information on external
RGB monitor port pin assignment. This port
allows you to connect an external RGB monitor
to the computer.Cooling ventsThe cooling vents help the processor to avoid overheating.Security lock slotA security cable can be attached to this slot andthen connected to a desk or other large object in
order to deter theft of the computer.
Back
The following figure shows the back of the computer. Figure 3-4 The back of the computer
Product appearance depends on the model you purchased.
Underside The following figures show the underside of the computer. You should
ensure that the display is closed before the computer is turned over to
avoid causing any damage.
User's Manual 3-5      
						

							Figure 3-5 The underside of the computer1. Cooling vents2. Battery pack
Product appearance depends on the model you purchased.
Cooling ventsThe cooling vents help the processor to avoidoverheating.Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire,possibly resulting in serious injury.
Carefully clean the dust on the cooling vents’ surface using a soft cloth.Battery packThe rechargeable lithium-ion battery pack
provides power to the computer when the AC
adaptor is not connected.
For more detailed information on the use and
operation of the battery pack please refer to the
Battery  section.
User's Manual 3-61
2 1
1
1
2 1
2  
						

							Front with the display openThis section shows the computer with the display panel open. In order toopen the display, lift the display panel up and position it at a comfortableviewing angle for you.
Figure 3-6 The front of the computer with the display panel openUser's Manual 3-75
1
88
9
7
6
11
12
243
10
13 5
1
88
7
6
11
12
243
9
10
13  
						

							Figure 3-7 Top side of the touch screen model1. Microphone8. Display hinges2. Web Camera LED9. Power button3. Web Camera10. Power indicator4. Microphone*11. Keyboard5. Wireless communication antennas
(not shown)12. Touch Pad6. Display screen13. Touch Pad control buttons7. Stereo speakers 
* Provided with some models.
Product appearance depends on the model you purchased.
MicrophoneThe built-in microphone allows you to import and
record sounds for your application - please refer
to the  Sound System and Video mode  section for
more information.Web Camera LEDThe Web Camera LED glows when the Web
Camera is operating.Web CameraWeb Camera  is a device that allows you to
record video or take photographs with your
computer. You can use it for video chatting or video conferences using a communication tool.Do not point the web camera directly at the sun.
Do not touch or press strongly on the web camera lens. Doing so mayreduce image quality. Use an eyeglass cleaner (cleaner cloth) or othersoft cloth to clean the lens if it becomes dirty.
Wireless
communication
antennasDepending on the configuration of your computer, one or all of the antennas listed below are built-in:
Wireless LAN
Wireless LAN/Bluetooth
Legal Footnote (Wireless LAN)
For more information regarding Wireless LAN, please refer to the  Legal
Footnotes  section.User's Manual 3-85
1243