Toshiba Satellite 5000ser Maintenance Manual

Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION5000 SeriesGENERAL INFORMATIONBefore attempting any of the following procedures,
make sure that the main battery and AC adaptor is 
not connected to the unit and the environment in 
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION5000 SeriesGENERAL INFORMATIONBefore attempting any of the following procedures,
make sure that the main...

TOSHIBA
Tough Enough for Today’s World         TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. HDD REMOVAL
4. MEMORY MODULE REMOVAL
5. MINI PCI CARD REMOVAL
6. MODEM BOARD REMOVAL
7. KEYBOARD REMOVAL
8. TOP COVER REMOVAL
9. CD-R/W//DVD-ROM DRIVE REMOVAL
10. SPEAKER(WOOFER) REMOVAL
11. SOUND BOARD REMOVAL
12. BATTERY BOARD REMOVAL
13. RTC REMOVAL
14. SECURE DIGITAL(SD) BOARD REMOVAL
15. VIDEO BOARD REMOVAL
16. COOLING MODULE REMOVAL
17. CPU REMOVAL
18. SYSTEM BOARD REMOVAL
19....

BATTERY PACK REMOVALOPTIONAL PC CARD REMOVAL
TOSHIBA
Tough Enough for Today’s World
1.  Turn the computer upside down as shown. 
2.  Slide the battery release lever  in the direction of  the
     arrow.   
3.  Lift out  the  battery pack.
4.  Separate the battery pack from the battery cover. 1. Press the 
eject button  of the PC Card you want to  
    remove.
2. Press  the extended  eject button to pop the PC card
     out slightly.
3. Grasp the  PC Card and pull it out
HDD REMOVAL
3. Grasp the  HDD...

MEMORY MODULE REMOVALMEMORY MODULE REMOVAL1. Turn the computer upside down. 
2. Remove two M2.5x4 black flat head  screws
    securing  the memory cover.
3. Lift out the cover.
TOSHIBA
Tough Enough for Today’s WorldMINI PCI CARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION5000 Series1. Turn the computer upside down.
2. Remove two M2.5x4 black torx screws securing
    the Mini PCI slot cover.     HDD REMOVAL5. Remove four M3x4 brass flat head screws securing the 
    HDD bracket to the drive.M3x4 Flat...

MODEM BOARD REMOVALMODEM BOARD REMOVALMINI PCI CARD REMOVAL1. Remove two M2.5x4 black flat head screws securing 
    the modem slot cover.2. Insert your finger nail or the case separator into the    notched side of the cover and lift up to release the    latch securing the modem slot cover.TOSHIBA
Tough Enough for Today’s World1. Open the display panel.
2. Remove the keyboard holder at the top of the
    keyboard.KEYBOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION5000 SeriesModem slot coverM2.5x4 black...

2. Turn the computer right side up and open the 
    LCD panel.
3. Remove one M2x4 brass screw  securing the KB 
    plate and lift out the KB plate. 
4. Remove  two M2.5x16 black screws  and two M2x6
     brass screws  securing the top cover.  
     
4. Lift out the  keyboard and set it on the palm rest.
5. Disconnect the  keyboard cable from PJ113  on the 
    system board and lift out the keyboard.
KEYBOARD REMOVAL
TOP COVER REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5000 Series
TOSHIBA
Tough Enough...

TOSHIBA
Tough Enough for Today’s World  TOP COVER REMOVAL  CD-R/W/DVD-ROM DRIVE REMOVAL1. Slide the CD-R/W/DVD-ROM drive to the right to 
    disconnect it from  PJ106 on the system board.
FIELD REPLACEABLE UNIT DOCUMENTATION5000 Series  CD-R/W//DVD-ROM DRIVE REMOVALM2x6 brass screwsM2x3 black screwCD-R/W/DVD-ROMside bracketCD-R/W/DVD-ROM bracketCD-R/W/DVD-ROM connectorCD-R/W/DVD-ROM driveSPEAKER(WOOFER) REMOVAL2. Remove one M2x3 black screw securing the side  bracket
    and lift out the bracket.3....

TOSHIBA
Tough Enough for Today’s WorldSOUND BOARD REMOVAL1. Remove two M2x4 black flat head screws securing the
    sound board.2. Lift out the sound board and disconnect the sound cable
    (FMZFL1) from PJ1100 on the sound board.SECURE DIGITAL(SD) BOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION5000 Series1. Remove one M2x4 brass screw securing the 
    SD support plate and the sound FIR board.2. Remove the SD support plate and lift up the back 
    side of the sound/FIR board to disconnect it from...

CPU REMOVALCOOLING MODULE REMOVAL1. Disconnect the fan harness from PJ770 on the system 
    board. 2. Remove three M2x8 brass screws  and securing the 
   cooling module to the system board.3. Peel off the glass tape securing the DC harness and
    lift out the cooling module.Fan harnessCooling moduleM2x8
brass screwsPJ770FIELD REPLACEABLE UNIT DOCUMENTATION5000 Series
TOSHIBA
Tough Enough for Today’s World1. Slide the CPU lock in the direction of the arrow.
2. Insert a 5mm flat head screwdriver on the...

TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION5000 SeriesINTERFACE BOARD REMOVAL 4. Remove one M2x4 brass screw and one M2.5x4
     flat head black screw securing the system board.
 5. Lift out the system board.M2x4 brass
screwM2.5x4 flat 
head black screwSYSTEM BOARD REMOVALTOUCHPAD REMOVAL1. Disconnect the touchpad cable from the touchpad 
    PCB.2. Remove four M2x4 brass screws securing the 
    touchpad assembly.3. Lift out the touchpad PCB.Touchpad
PCBTouchpad...