Toshiba S70b Owners Manual

							Damage that might be caused by using third party equipment or
software.
Given the technological limitations of current optical disc writing drives, you
might experience unexpected writing or rewriting errors due to disc quality
or problems with hardware devices. In view of this, it is good practice to make two or more copies of important data, in case of any undesired
change or loss of the recorded contents.
Before writing or rewriting
Based on TOSHIBA limited compatibility testing, we suggest the
following manufacturers of disc media, however, it must be noted that disc quality can affect write or rewrite success rates. Also be aware
that in no event does TOSHIBA guarantee the operation, quality or
performance of any disc.
CD-R:
TAIYO YUDEN CO., Ltd.
MITSUBISHI KAGAKU MEDIA CO., LTD.CD-RW: (Multi-Speed, High-Speed and Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD.DVD-R:
DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media)
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)DVD-R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)DVD+R:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)DVD+R DL:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x speed media)DVD-RW:
DVD Specifications for Recordable Disc for Version 1.1 or version 1.2
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media)DVD+RW:
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)
User's Manual 4-9 
						

							DVD-RAM: (DVD Super Multi drive only)
DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or
Version 2.2
Panasonic Corporation (for 3x and 5x speed media)BD-R:
Panasonic CorporationBD-R DL:
Panasonic CorporationBD-RE:
Panasonic CorporationBD-RE DL:
Panasonic CorporationBD-R TL:
TDK CorporationBD-RE TL:
Panasonic CorporationSome types and formats of DVD-R DL and DVD+R DL discs might be
unreadable.
Disc created in DVD-R DL format4 (Layer Jump Recording) cannot be
read.
When writing or rewriting
Please observe the following points while you write or rewrite data to a
media:
Always copy data from the hard disk drive to the optical media. Do not use the cut-and-paste function as the original data will be lost if there
is a write error.
User's Manual 4-10 
						

							Do not perform any of the following actions:
Change users in the Operating Systems.
Operate the computer for any other function, including such tasksas using a mouse or Touch Pad, or closing/opening the display
panel.
Start a communication application.
Apply impact or vibration to the computer.
Install, remove or connect external devices, including such items
as a memory media card, USB device, external monitor or an optical digital device.
Use the audio/video control button to reproduce music or voice.
Open the optical disc drive.
Do not use shut down, log off, Sleep Mode or Hibernation Mode
functions while writing or rewriting.
Make sure that the write/rewrite operation is completed before going
into either Sleep Mode or Hibernation Mode (You can remove an
optical media on the optical disc drive after writing is completed).
If the media is of poor quality, or is dirty or damaged, writing or rewriting errors might occur.
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. In addition, do not use the
computer on an unstable surface such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
CyberLink PowerDVD for TOSHIBA Be aware of the following limitations when you use the CyberLink
PowerDVD for TOSHIBA:
Notes on use
This software can only be used on Windows operating system.
CyberLink PowerDVD for TOSHIBA is only provided with models configured with a DVD Super Multi drive.
CyberLink PowerDVD for TOSHIBA software is supported for
playback of DVD and video file.
Frame dropping, audio skipping or out of sync audio and video may
occur during playback of some video titles.
Close all other applications when using the CyberLink PowerDVD for TOSHIBA. Do not open any other applications or carry out any otheroperations during video playback. Playback may stop or not function
properly in some situations.
Unfinalized DVDs created on home DVD recorders may not be playable on the computer.
Use DVD-Video discs with a region code which is either "the same as
the factory default setting" (if applicable) or "ALL".
User's Manual 4-11 
						

							Do not playback video while watching or recording television programs
using other applications. Doing so may cause video playback or
television program recording errors. In addition, if prescheduled
recording starts during video playback it may cause video playback or
television program recording errors. Please view video during times when there is no recording prescheduled.
The resume function cannot be used with some discs on the
CyberLink PowerDVD for TOSHIBA.
It is recommended the AC adaptor be connected when playing video. Power saving features may interfere with smooth playback. Whenplaying video using battery power, set the Power Options to "Balance".
The screen saver is disabled during video playback using the
CyberLink PowerDVD for TOSHIBA. The computer will not
automatically go into Hibernation or Sleep mode.
Do not configure the Display automatic power off function to run while
the CyberLink PowerDVD for TOSHIBA is running.
Do not switch to Hibernation or Sleep Mode when running the
CyberLink PowerDVD for TOSHIBA.
Do not lock the computer using the Windows logo (  ) + L keys
when running the CyberLink PowerDVD for TOSHIBA.
The CyberLink PowerDVD for TOSHIBA does not have a parental
control function.
Carry out the installation/uninstallation of the CyberLink PowerDVD for
TOSHIBA under a user account with administrator rights.
Do not change Windows Users while CyberLink PowerDVD for TOSHIBA is running.
For some DVD or video files, using the control window to change theaudio track will also change the subtitle track.
The playback of some media files may not be normal by this player.This may also happen when using Windows Media Player and Video app.
Display Devices & Audio
If the video image is not displayed on an external display or television, stop the CyberLink PowerDVD for TOSHIBA, and change the screen resolution. To change the screen resolution, click  Control Panel ->
Appearance and Personalization -> Display -> Adjust resolution
under  Windows System  in the Apps view. However, video cannot be
output to some external displays and televisions due to output or playback conditions.
When viewing video on an external display or TV, change the displaydevice before playing. Video can be played only on internal LCD displays or external displays. In Clone mode (Dual View), CyberLink
PowerDVD for TOSHIBA may not function properly.
Do not change the screen resolution while running the CyberLink
PowerDVD for TOSHIBA.
User's Manual 4-12  
						

							Do not change the display device while running the CyberLinkPowerDVD for TOSHIBA.
Starting CyberLink PowerDVD for TOSHIBA Use the following procedure to start CyberLink PowerDVD for TOSHIBA.1. Insert a DVD-Video in the optical disc drive while the operating system is running.
When a DVD-Video disc is set in the DVD drive (for models with DVD drive), CyberLink PowerDVD for TOSHIBA may start automatically.
2. Click  CyberLink PowerDVD for TOSHIBA  in the Apps view to start
CyberLink PowerDVD for TOSHIBA.
Operating CyberLink PowerDVD for TOSHIBA Notes on Using CyberLink PowerDVD for TOSHIBA.
Screen display and available features may vary amongst videos and
scenes.
Open CyberLink PowerDVD for TOSHIBA Manual CyberLink PowerDVD for TOSHIBA features and instructions are detailed
in CyberLink PowerDVD for TOSHIBA Help. Use the following procedure to
open CyberLink PowerDVD for TOSHIBA Help.
Press the  F1 key when CyberLink PowerDVD for TOSHIBA is launched.
TOSHIBA Blu-ray Disc Player Please be aware of the following limitations when you use TOSHIBA Blu-
ray Disc Player.
Notes on Use
This software can only be used on Windows operating system.
TOSHIBA Blu-ray Disc Player is only provided with models configured
with a Blu-ray™ Writer drive.
Playback of high bit rate content might cause frame dropping, audio
skipping or decrease in computer performance.
Close all other applications before playing back video. Do not open
any other applications or carry out any other operations during video
playback.
Do not switch to Hibernation or Sleep Mode when running the
TOSHIBA Blu-ray Disc Player.
Because Blu-ray Disc™ playback operates according to programs
built into the content, operation methods, operation screens, sound effects, icons and other features might vary from disc to disc. For more
information on these items refer to instructions included with content
or contact the content manufacturers directly.
User's Manual 4-13 
						

							Make sure to connect the AC adapter of the computer when playing a
video.
TOSHIBA Blu-ray Disc Player supports AACS (Advanced Access
Control System) copy protection technology. Renewal of the AACS
key integrated into this product is required for uninterrupted enjoyment
of Blu-ray Disc™. An Internet connection is required for renewal.
AACS key renewal is provided free of charge for 5 years after the purchase of this product, however renewal beyond 5 years is subject
to conditions specified by the software provider, TOSHIBA
Corporation.
Do not play back video while recording television programs using
other applications. Failure to do so might cause video playback or television program recording errors. In addition, if pre-scheduledrecording starts during video playback it might cause video playback
or television program recording errors. Please view video during times when there is no recording prescheduled.
While playing a BD-J title, keyboard shortcut is ineffective.
Resume play function cannot be used with some discs on TOSHIBA
Blu-ray Disc Player.
The interactive function on Blu-ray™ discs might not work depending on the contents or network situation.
Blu-ray™ drives and their associated media are manufactured
according to the specifications of three marketing regions. Region
codes can be set from TOSHIBA Blu-ray Disc Player. (Click the Settings  button in the Control Panel. And click the  Blu-ray Region 
Setting  Tab). When you purchase Blu-ray™ Video, make sure it
matches your drive, otherwise it will not play properly.
To play back video on an external display or TV using TOSHIBA Blu- ray Disc Player, use output devices like external displays or TV that have HDCP supported HDMI port. The video cannot be displayed on
an external display or TV connected to the RGB connector.
The Blu-ray Disc™ movie can be played only on internal LCD displays
or external devices connected via an HDMI output. In Clone mode
(Dual View), TOSHIBA Blu-ray Disc Player might not function properly.
This product does not play HD DVD discs. Blu-ray™ discs with high
definition content are required for HD viewing.
This software can only play back MPEG2, MP4 and WTV files created
by the preinstalled applications on the same computer. Playback might
not function properly if you use the files other than these types.
The playback of some media files might not be normal by this player. This might also happen when using Windows Media Player and Video app.
User's Manual 4-14 
						

							Display Devices & Audio
If the video image is not displayed on an external display or television,stop the TOSHIBA Blu-ray Disc Player, and change the screen resolution. To change the screen resolution, click  Control Panel ->
Appearance and Personalization -> Display -> Adjust resolution
under  Windows System  in the Apps view. However, video cannot be
output to some external displays and televisions due to output or playback conditions.
When viewing video on an external display or TV, change the displaydevice before playing. Video can be played only on internal LCD displays or external displays. In Clone mode (Dual View), TOSHIBABlu-ray Disc Player might not function properly.
Do not change the screen resolution while running the TOSHIBA Blu-
ray Disc Player.
Do not change the display device while running the TOSHIBA Blu-ray
Disc Player.
Starting TOSHIBA Blu-ray Disc Player Use the following procedure to start TOSHIBA Blu-ray Disc Player.
Insert a Blu-ray™ Movie Disc in the optical disc drive while the
operating system is running.
When a Blu-ray™ Movie Disc is set in the Blu-ray™ drive (for models
with Blu-ray™ drive), TOSHIBA Blu-ray Disc Player might start automatically.
Click  TOSHIBA Blu-ray Disc Player  under TOSHIBA  in the Apps
view.
Operating TOSHIBA Blu-ray Disc Player Notes on using TOSHIBA Blu-ray Disc Player.
Screen display and available features might vary amongst Blu-ray™
Videos and scenes.
If the menu is opened in the Display Area using the Control Panel's Top Menu or Menu buttons, Touch Pad and mouse menu operations
might not be able to be used.
Open TOSHIBA Blu-ray Disc Player Manual TOSHIBA Blu-ray Disc Player features and instructions are explained in
details in TOSHIBA Blu-ray Disc Player Manual.
Use the following procedure to open TOSHIBA Blu-ray Disc Player Manual.
Press the  F1 key when TOSHIBA Blu-ray Disc Player is launched and
click the  Help button.
User's Manual
4-15 
						

							3D Playback on an External 3D Device3D playback on an external 3D device feature is only provided with some
models.
Effect of 3D can be shown only on an external 3D devices connected via an HDMI output. It cannot be shown on the internal display. In order for 3Dplayback to work on external display/TV, you need a 3D enabled display/
TV that has an HDCP compliant HDMI port.3D playback feature supports the following resolutions:1920x1080 24Hz
and 1280x720 60Hz.
Please change the Screen Resolution to one of the above before using 3D
playback function.
Important Safety Information for 3D Function
Refrain from or stop viewing if you feel ill or experience discomfort before or while watching 3D video images.
Refrain from viewing 3D video images if you experience convulsions,
photosensitivity reaction, or heart disease.
Due to the possibility of impact on vision development, viewers of 3D video images should be aged 6 or older. Children and teenagers might
be more susceptible to health issues associated with viewing in 3D
and should be closely supervised to avoid prolonged viewing without
rest.
Avoid use of the 3D function when under the influence of alcohol.
Read the user’s manual that comes with the computer carefully before
using the 3D playback function.
The 3D effect differs between individuals.
Notes on 3D Playback for TOSHIBA Blu-ray Disc Player The 3D playback function can playback 3D video content, and your 2Dhome video content and other 2D content created by you (DVD or video
file) in 3D using real-time 2Dto3D conversion.
The 3D playback function CANNOT be used to playback 2D video
contents of Blu-ray Disc or AVCHD in 3D using real-time 2Dto3D conversion.
The 3D playback function of the Player is meant for only personalhome use. Take note that applicable copyright laws might prohibit thepublic display when you offer 3D viewing of third party video contents
to unidentified personels or mass public.
The 2Dto3D conversion function uses TOSHIBA's original algorithm to
apply a 3D effect to your own 2D videos. However, note that this function does not provide the same video content as a video originally
provided in 3D, and does not create a new video in the 3D format but
only plays 2D videos in a 3D like mode.
User's Manual 4-16 
						

							The picture generated by 2Dto3D conversion function is not the same
as a picture produced for 3D playback use. The 2Dto3D conversion
function simply uses TOSHIBA's original algorithm to apply pseudo 3D effect to the 2D content.
The Player is set by default in the 2D format. By pressing the 2Dto3D
conversion function button, you decide to activate the 2Dto3D
conversion function and therefore decide to watch your 2D content in 3D. The Player will not run the 2Dto3D conversion function
automatically. Please see the warnings in this section as regards potential copyright infringement and confirm you have any necessary
authorization.
The Player is intended for playing DVD-Video, DVD-VR and video files
and for viewing 2D home video content and other 2D content created by you in 3D. The 3D playback of any video content not created by theuser might require the direct or indirect permission of third parties,
where such content is protected by copyright, unless otherwise
permitted under applicable law. The protection of intellectual property rights is essential for TOSHIBA. In this respect, TOSHIBA underlines
that the Player should not be used in a manner infringing such rights. It is your responsibility to ensure that you do not infringe any
applicable intellectual property laws when you decide to use the
Player and, more specifically, when you decide to activate the 2Dto3D conversion function of the Player.
Some functions cannot be used during 3D playback. In such cases,
any buttons used for those functions may be disabled.
Depending on the system environment, the player may automatically switch into 2D if you perform any of the following operations during 3Dplayback. Furthermore, you may experience some time lag when theswitching occurs.
- Opening windows or pop-ups such as [Right-Click Menu], [Settings
Window], [File Select] or [Error Message].
- Using Windows features.
- Using any other applications.
Make sure to use AC adapter when playing with 3D playback feature
enabled.
Depending on the system environment, 3D playback may only be used when the "Video Display Window" is at full-screen. 3D playbackmight not function when windowed.
In order for the 3D playback to work on an external display/TV, you
need a 3D enabled display/TV that has an HDCP compliant HDMI
port.
3D video content can only be displayed on an external display connected using HDMI "with 3D".
3D Settings can be changed on the "Settings" Screen, but the defaultsettings are highly recommended. Changing the settings may causethe 3D stereoscopic effect to become stronger, which in turn might
cause eye fatigue.
User's Manual 4-17 
						

							The 3D effect differs between individuals. Refrain from or stop viewing
and check your equipment settings, if you can see doubly-substituted video images or cannot feel the 3D stereoscopic effect when watching 3D video images. Still, if you cannot see correctly, refrain from or stopviewing.
Refrain from or stop viewing if you feel ill or experience discomfort
before or while watching 3D video images.
Position yourself directly in front of the display when watching 3D
video images. And take regular breaks in between.
Due to the possibility of impact on vision development, viewers of 3D video images should be aged 6 or older.
Consider whether it is suitable or is there a need for limiting the
viewing time before allowing your child to watch a 3D content.
This software does not have parental lock for 3D video viewing. Use
the login-password functions of Windows if you are worried about the
effect of 3D playback on your child's visual function.
This software can playback MPEG2, MP4, and WTV files. Your own
2D video contents recorded using home video camcorder and other
content created by you can be played in either 2D, or 3D using real- time 2Dto3D conversion. As for playback of 3D video content, onlySide-by-Side and Interleave 3D video formats are supported.
Not all files can be played.
Battery This section explains battery types, use, recharging methods and handling.
Battery pack When the AC adaptor is not connected, the main power source of thecomputer is this lithium ion battery pack, also referred to in this manual as the main battery. You can purchase additional battery packs for extended
use of the computer away from an AC power source although you should
not change the battery pack while the AC adaptor is connected.
Before you remove the battery pack, save your data and shut down the
computer, or place the computer into Hibernation Mode. Be aware that, when placing the computer into Hibernation Mode, the contents of memory are saved to the HDD/SSD, although for safety sake, it is best to also saveyour data manually.
Real-Time Clock (RTC) function
The Real-Time Clock (RTC) function is supported. The main battery
provides power for the internal real-time clock and calendar function and also maintains the system configuration while the computer is turned off. Ifthe RTC lasting time completely runs out, the system will lose this
information and the real-time clock and calendar will stop working.
User's Manual 4-18