Toshiba Projector Tlp X21u User Manual

71
CONTENTS
Adjustments &
Settings
1
12,3
3 2
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
Preparation1
Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
28
Shutter
Camera
Picture
ContrastBrightnessSharpnessScreen sizeLevel
+6
00
[
ENTER]
Full...

72
CONTENTS
Adjustments &
Settings
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.
5 4
5 4
TEMPLAMP ONBUSY FANON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
FULL MENU settings Ð Factory reset mode (continued)
Press ENTER.The settings are reset to the factory default settings according
to the conditions selected in step 3.
5Notes
¥ If the power is...

73
CONTENTS
Adjustments &
Settings
LASER
1
3
13
22
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP
ONBUSY FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
Preparation1
Display the PIP sub-picture on the screen as explained in the step ÒDisplaying PIP Sub-picturesÓ. 
37
PIPSource
Size
Position
Audio
Main SubSmall
Large
Video S-Video
EXITQuit...

74
CONTENTS
Document
imaging camera
Part names (of the document imaging camera model)
CAUTION
When using the camera, be careful to not
pinch your hand or fingers into the arm.
On the document imaging camera model, you can
project pictures using the document imaging camera.
The document imaging camera can directly project any
materials (documents, illustrations, etc.) without using an
OHP film.
TEMPLAMP ONBUSY FAN
ON/STANDBY
KEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUT
VOL/ADJ.
STORE
CAMERAARM LIGHT...

75
CONTENTS
Document
imaging camera
Notes
¥ Never give shocks or impacts to the camera or arm as this may cause malfunction.
¥ While raising up or turning the arm, the arm moves describing an arc, be careful not to hit your face or your body.
Preparation of the document imaging camera
TEMPLAMP
ONBUSY
FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.
TEMPLAMP
ONBUSYFANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.
STORE
CAMERAARM LIGHTLOCKW.BALANCEGAIN
FOCUS
TEMPLAMP
ONBUSY...

76
CONTENTS
Document
imaging camera
Picture projection with the document imaging camera
TEMPLAMP
ONBUSY
FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.
STORE
CAMERAA
R
M
 L
IG
H
TLOCKW
.B
A
L
A
N
C
EGAIN
FOCUS
1
LOCK
STORE IMAGE
CAMERAARM LIGHT W.BALANCE
CAMERAGAIN
CAUTION
Do not look into the arm light while it is lit.
Preparation1
Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
28
Press ARM LIGHT.The light turns on.
1
ARM LIGHT
Set a document to be...

77
CONTENTS
Document
imaging camera
Press CAMERA to select the camera input
mode.¥ You can also select it by pressing INPUT on the remote
control or on the main unit. Set the input source on the menu
screen when selecting by the INPUT button. 
54
¥ The CAMERA button can be used regardless of the input
setting.
¥ ÒCameraÓ is displayed when the picture switches to the
document imaging cameraÕs picture.
3
Continued
CAMERAINPUTINPUT
TEMPLAMP
ONBUSY
FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT...

78
CONTENTS
Document
imaging camera
Press CAMERA GAIN (+/-) to improve view of a
camera subject which is too dark or vivid.
6Notes
¥ You can adjust the ÒSharpnessÓ of the camera image on the menu screen. 
54
• If the image flickers due to a fluorescent light in the room, either turn off the fluorescent light or
set the “Shutter” from the menu screen. 
54
Note that the image may still flicker due to the lighting, the document status, the image
adjustment, etc., even if the “Shutter” setting is changed....

79
CONTENTS
Document
imaging camera
Normally, this camera automatically adjusts the color balance to project the picture. If the
adjustment is not sufficient, follow the steps below to lock the white balance.1
Project a white paper and enlarge it to fill the
screen.
Notes
¥ If you raise up the arm while the camera input is selected, the color of the picture may vary for
an instant due to the automatic white balance adjustment. This is not a malfunction.
¥ If you put back the arm and raise it up while the...

80
CONTENTS
Document
imaging camera
With the document camera operating, fully
cover the camera lens with a piece of black
paper or cloth.
1
Correcting illuminated defects
Note
Do not press ARM LIGHT and EXIT buttons simultaneously if the camera lens is not
covered. Doing so will not only erase the white spot correction data already set but also
result in parts that are displayed normally being corrected.  Also be careful if the camera
input mode is not selected.
ARM LIGHT
EXIT
TEMPLAMP ONBUSY...