Toshiba Projector Tlp X20u User Manual
Have a look at the manual Toshiba Projector Tlp X20u User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 CONTENTS Adjustments & Settings MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ. 5 5 44 TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER After the settings are finished, press EXIT.The menu screen disappears. EXITEXIT 5 Press VOL/ADJ (+/ -) to adjust and set. 4Notes ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory. ¥ The ÒAudioÓ settings are applied to all the input sources. (It is impossible to change the settings for each input source.) ¥ The settings do no affect on the audio output signals from the AUDIO OUT jack. ¥ If either the memory card input or the document imaging camera input mode (for models with document imaging camera) is selected, the sound is not developed. Speaker outputWhen set to ÒOff Ó, no sound is produced from the speakers.Channel selectL+R: The sound of the left and right channels is mixed and developed from the speakers. L: To develop only left input audio signal from the speakers. R: To develop only right input audio signal from the speakers.LoudnessWhen set to ÒOnÓ, the loudness effect is added to the speaker sound. FULL MENU settings Ð Audio (continued)Remote controlControl panel (Main unit side)
62 CONTENTS Adjustments & Settings 1 12,3 3 2 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER Preparation1 Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 28 Y/PB/PR Contrast Brightness Color Tint Sharpness Signal format Screen size Level +6 0 0 0 0 [ ENTER] [ ENTER] Full WideThru MENUMENUPictureMENUEXITQUICK Page Item Adjust Quit Color +6000 MENU EXIT QUICK MENUContrast BrightnessAdjust the contrast of the image.Lamp power KeystoneInput source settingLanguage[ ENTER] [ ENTER] Hi LowFULL Item Adjust Quit Y/PB/PR Y/PB/PR Keystone Keystone Horizontal reference value reset 0 [ ENTER] MENU EXIT QUICK Page Item Adjust Quit FULL MENU settings Ð Keystone 1 MENUMENU 2 Use the selection buttons ( / ) to display the ÒKeystoneÓ menu. Use the selection buttons ( / ) to select the setting items. 3 ¥ If the screen is not installed vertically, you can adjust the keystone distortion manually. ¥ The projector stores the standard conditions of horizontal installation, but depending on the usage environment (if the projector is subject to vibrations or shock, etc.), the standard may change. If the keystone distortion is not properly corrected when the AUTO KEYSTONE button is pressed with the screen installed vertically, set the projector on a flat surface then use the menu screenÕs ÒHorizontal reference value resetÓ function. Continued Remote controlControl panel (Main unit side) Press MENU twice.When pressed once, the QUICK MENU screen appears. When pressed twice, the ÒPictureÓ screen of the FULL MENU appears.
63 CONTENTS Adjustments & Settings LASER MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ. 5 5 4-a 4-a4-b 4-b TEMPLAMP ONBUSYFANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY Y/PB/PR KeystoneRecalibrate the horizontal reference value for keystone. Are you sure ? Ye s No Horizontal referrence value reset MENU EXIT QUICK Select Back ENTEREnter FULL MENU settings Ð Keystone (continued) When selecting ÒKeystoneÓ in step 3. Press VOL/ADJ (+/ -) to adjust and set. (-) (+) Keystone: To reduce the lower width To reduce the upper width Notes ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory. ¥ The ÒKeystoneÓ adjustments and settings are applied to all the input sources. (It is impossible to store different adjustments and settings for each input source.)When selecting ÒHorizontal reference value resetÓ in step 3.4-b Press ENTER.The sub-menu of ÒHorizontal reference value resetÓ appears.Use the selection buttons ( / ) to select ÒYesÓ and press ENTER. The horizontal reference value is reseted. 4-a5 After the adjustments and settings are finished, press EXIT several times until the menu screen disappears.Press the EXIT button once when the FULL MENU is displayed, press twice when the sub menu is displayed. EXITEXITENTERENTERENTERENTER Remote controlControl panel (Main unit side)
64 CONTENTS Adjustments & Settings 1 12,3 3 2 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER Preparation1 Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 28 Memory card Contrast Brightness Input select mode Auto. demo Slide show Interval Screen size Level +6 0 [ ENTER] [ ENTER] Full ThruManual Auto.Off OnManual Auto. PictureMENUMENU EXIT QUICK Page Item Adjust Quit Memory card +600 MENU EXIT QUICK MENUContrast BrightnessAdjust the contrast of the image.Picture mode Lamp power KeystoneInput source settingLanguage[ ENTER] [ ENTER] [ ENTER] Hi Low Off OnFULL Item Adjust QuitAuto. demo Memory card Display LanguageNo signal backgroundIconMenu positionMenu background translucentStart-up screen Press the [ ENTER]On Off Logo None Blue backgroundOn OffOn Off MENU EXIT QUICK Item Quit Page FULL MENU settings Ð Display You can set the language, menu display and start-up screen, etc. 1 MENUMENU 2 Use the selection buttons ( / ) to display the ÒDisplayÓ menu. Use the selection buttons ( / ) to select the setting items. 3 Continued Remote controlControl panel (Main unit side) Press MENU twice.When pressed once, the QUICK MENU screen appears. When pressed twice, the ÒPictureÓ screen of the FULL MENU appears.
65 CONTENTS Adjustments & Settings LASER MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ. 4-a 4-a TEMPLAMP ONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY Memory card Display Language MENU EXIT QUICK SelectBack When selecting ÒLanguageÓ in step 3. Press ENTER.The sub-menu of ÒLanguageÓ appears.Use the selection buttons ( / ) to select a language. Press EXIT to return to the FULL MENU. : English : French : German : Italian : Spanish : Portuguese : Japanese : Chinese (Simplified) : Chinese (Traditional) : Korean English Français Deutsch Italiano Español Português ENTERENTEREXITEXIT FULL MENU settings Ð Display (continued) Continued 4-a Remote controlControl panel (Main unit side)
66 CONTENTS Adjustments & Settings MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ. 5 5 4-b 4-b TEMPLAMP ONBUSYFANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER FULL MENU settings Ð Display (continued) After the settings are finished, press EXIT.The menu screen disappears. EXITEXIT 5 Press VOL/ADJ (+/ -) to adjust and set. Notes ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory. ¥ The ÒDisplayÓ settings are applied to all the input sources. (It is impossible to store different settings for each input source.) No signal background (Setting of screen of no signal input)Logo: The TOSHIBA logo screen is displayed.Blue background: The entire screen is blue. None: The screen is black. IconWhen set to ÒOff Ó, the icons displayed normally when the input is changed or other operations are performed, are no longer displayed.Menu positionSelect the position where the menu is displayed (ÒUpper leftÓ, ÒUpper rightÓ, ÒBottom leftÓ or ÒBottom rightÓ).Menu background translucentWhen set to ÒOnÓ, the menu background becomes translucent.Start-up screenWhen set to ÒOnÓ, the opening screen is displayed when the power is turned on. 4-bWhen selecting setting items other than ÒLanguageÓ in step 3. Remote controlControl panel (Main unit side)
67 CONTENTS Adjustments & Settings 1 12,3 3 2 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER Preparation1 Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 28 Digital RGB Picture Contrast BrightnessPositionPicture mode Screen sizeLevel +6 0 [ ENTER] [ ENTER] Bright True color Full Thru PhaseFrequency MENUMENU EXIT QUICK Page Item Adjust Quit Digital RGB 00 +6 MENU EXIT QUICK MENUContrast BrightnessAdjust the contrast of the image.Picture mode Lamp power KeystoneInput source settingLanguage[ ENTER] [ ENTER] Hi Low Bright True color FULL Item Adjust QuitPhase Digital RGB Default setting Input source setting Projection modeNo signal power offPower onLamp power [ ENTER] [ ENTER] Off 5 min. Manual Auto. High Low MENU EXIT QUICK Item Quit Page 12 Use the selection buttons ( / ) to display the ÒDefault settingÓ menu. Use the selection buttons ( / ) to select the setting items. 3 MENUMENU FULL MENU settings Ð Default setting You can set the input source which can be selected by the INPUT button; you can also set the projection mode, power off at no signal status, power on mode and lamp power. Continued Remote controlControl panel (Main unit side) Press MENU twice.When pressed once, the QUICK MENU screen appears. When pressed twice, the ÒPictureÓ screen of the FULL MENU appears.
68 CONTENTS Adjustments & Settings LASER 4-a 4-a 4-a 4-a 4-a 4-a 4-a 4-a MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY Digital RGB Default setting COMPUTER-1 COMPUTER-2VideoMemory cardCameraS-video Analog RGB( 1) Y/PB/PR Analog RGB( 2) Digital RGB Input source setting MENU EXIT Change Back ENTERSet QUICK Item When selecting ÒInput source settingÓ in step 3. (Set the input that can be selected using INPUT button.) Use the selection buttons ( / ) to select the input source to be set, then press ENTER to check it. ¥ The check turns on and off each time the ENTER button is pressed. ¥ When a check box is checked, that input source can be selected by the INPUT button.(When selecting COMPUTER-1 and COMPUTER-2)Press VOL/ADJ (+/ -) to select the type of input source. The setting whose button is displayed in yellow is the one currently set.Press EXIT to return to the FULL MENU. Press ENTER.The sub-menu of ÒInput source settingÓ appears. Notes ¥ It is impossible to exit from the menu if no input source is selected. ¥ If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed. ¥ For the memory card and document imaging camera, there are modes in which these can be selected even if their check box is not checked. 56 77Menu items Main unit indication COMPUTER-1 COMPUTER IN 1 COMPUTER-2 COMPUTER IN 2 Video VIDEO S-video S-VIDEO Memory card Camera Document imaging camera (For the model with camera) ENTERENTER ENTERENTER EXITEXIT FULL MENU settings Ð Default setting (continued) Continued 4-a Remote controlControl panel (Main unit side)
69 CONTENTS Adjustments & Settings LASER 4-b 4-b 4-b 4-b 4-b 4-b MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY Digital RGB Default setting Standard RearCeilingRear ceiling Projection mode MENU EXIT QUICK Select Back Digital RGB Default setting Standard RearCeilingRear ceiling Projection mode MENU EXIT QUICK Select Back FULL MENU settings Ð Default setting (continued) When selecting ÒProjection modeÓ in step 3. Press ENTER.The sub-menu of ÒProjection modeÓ appears.Use the selection buttons ( / ) to select the projection mode. Select the installation position of the projector. Confirm by referring to the chart on page 17 21 . Standard: Floor-mounted front projection Rear: Floor-mounted rear projection Ceiling: Ceiling-mounted front projection Rear ceiling: Ceiling-mounted rear projection Press EXIT to return to the FULL MENU. ENTERENTEREXITEXIT Continued 4-b Remote controlControl panel (Main unit side)
70 CONTENTS Adjustments & Settings MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ. 5 5 4-c 4-c TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER After the settings are finished, press EXIT.The menu screen disappears. EXITEXIT 5 Press VOL/ADJ (+/ -) to set. Notes ¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory. ¥ The settings of ÒDefault settingÓ are applied to all the input sources. (It is impossible to store different settings for each input source.) No signal power offOFF: The power does not turn off automatically even if the no signal status continues. 5 min.: The power turns off automatically if the no signal status continues for approx. 5 min.Power onManual: The power turns on by pressing the ON/STANDBY button. Auto: When the power cord is plugged, the power turns on. Press the ON/STANDBY button when turns power off. 31 Lamp powerHi: Set the lamp mode with brightness priority. Low: Restrict the lamp output to reduce the cooling sound. When selecting “No signal power off ”, “Power on” or “Lamp power” in step 3. Note The cooling sound changes according to the temperature inside the projector. When the lamp power setting is changed, the brightness changes immediately, but the cooling sound level does not change immediately. FULL MENU settings Ð Default setting (continued) Remote controlControl panel (Main unit side) 4-c