Toshiba Projector Tlp X20u User Manual
Have a look at the manual Toshiba Projector Tlp X20u User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Operations CONTENTS Projecting images stored in a memory card (continued) When using the memory card function for the first time, set the ÒInput source settingÓ on the menu screen.With the factory default setting, it is impossible to select the memory card input by the INPUT button. Change the setting following the instructions of ÒQUICK MENU Adjustments and SettingsÓ 48 to make the memory card input selectable. Insert the memory card into the card slot.Insert the card securely, pressing it as far as it can go. Be careful to insert the card in the proper direction. The slot is designed so that it is difficult to insert cards in the wrong direction. Inserting the card forcibly may deform the internal terminals or cause other problems. 12 Analog RGB( 1) QUICK MENUMENU EXIT FULL Item Change Back ENTERSet COMPUTER-1 COMPUTER-2VideoMemory cardCameraS-video Analog RGB( 1) Y/PB/PR Analog RGB( 2) Digital RGB Input source setting TEMPLAMPONBUSYFA N ON/STANDBY EXIT ENTER MENUINPUT InssertUp side LASER MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSYFA NKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ. 3 3 3 TEMPLAMP ONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY 2 INPUTINPUTBUSY (Light in orange) 3 Press INPUT repeatedly to select the memory card input.The ÒMemory cardÓ input display appears on the screen. ¥ Start to read the data on the memory card and display the image data sequentially as thumbnails. ¥ The BUSY indicator lights in orange while the memory card is being accessed. (Do not eject the memory card while the BUSY indicator is lit.) Check ÒMemory cardÓ. Continued Remote controlControl panel (Main unit side) BUSY indicator
42 Operations CONTENTS Description of screen 34 Continued ENTER EXIT Enter SelectABCDEFGH.jpg Up Next Back Display when there has a previous page.Display the name of folder or file selected. Operation guideDisplay when there has a following page. LASER MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTTEMPLAMP ONBUSYFA NON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY 4 VOL/ADJ. 4 VOLUME/ADJUST Projecting images stored in a memory card (continued) The illustration below is an example for explanation purpose only. The actual display, the number of directory, etc., differs depending on the data stored in the memory card. ¥ When the memory card is inserted, its root directory (the topmost level) is displayed first. ¥ indicates folders. There may be other folders or files inside folders. (Multiple directory) ¥ Small images are called thumbnails. JPEG files are displayed as thumbnails. ¥ The numbers in the circles are not displayed. 1, 2: Folders containing JPEG files 3: Folders which may contain JPEG files in lower directory 4: Folders not containing JPEG files 5: Folders with camera images stored. (For the models with document imaging camera) 6 to i: JPEG files stored in the currently displayed directory o: JPEG files that cannot be displayed as thumbnails ;: Files not compatible 6: The orange frame indicates the currently selected JPEG file Use VOL/ADJ (+/ -) to change pages. (Page changing) When an icon ( or ) is displayed to indicate that there is a previous or following page, use the VOL/ADJ (+/ -) buttons to change pages and search for the desired thumbnails or folders. (Continued) Remote controlControl panel (Main unit side) The icon appears during image data processing.
43 Operations CONTENTS Use the selection buttons ( / / / ) to select the thumbnail you wish to display as a slide. (Thumbnail selection) ¥ The selected thumbnail is surrounded by an orange frame. ¥ If the desired file (thumbnail) is in a different folder, select that folder.Press ENTER. (Slide display)¥ When a thumbnail is selected, that image is displayed as a slide (a large picture). ¥ When a folder is selected, the contents of that folder are displayed as thumbnails in the same way as in step 3 above. In this case, return to step 5 or 4.When a folder is selected, repeat steps 5 and 6 until the desired thumbnail is displayed. The maximum number of folder directory levels that can be searched through at this time is within 5 levels from the root directory (up to 5 levels of folders). 5678 6 8 6 8 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTTEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY 5 5 7 VOL/ADJ. 7 VOLUME/ADJUSTLASER ENTERENTEREXITEXIT Projecting images stored in a memory card (continued) Press VOL/ADJ (+/ -). (Slide transition) ¥ Press the (+) button to display the next slide. ¥ Press the ( -) button to display the previous slide. You can only change the JPEG files stored in the same directory level (including the previous and following pages) by the VOL/ADJ (+/ -) buttons. Press EXIT.The display returns to as it was in step 3. If you have searched to the bottommost level in step 5, pressing the EXIT button repeatedly moves the display sequentially back up to higher levels until the contents of the root directory are displayed. Continued Remote controlControl panel (Main unit side)
44 Operations CONTENTS EMPLAMPONFA N ON/STANDBY EXIT ENTER MENUINPUT Press To eject the memory cardTo eject a memory card, first check that the BUSY indicator is off, then press the card slotÕs eject button. The memory card pops out part way, then pull it out by hand. Projecting images stored in a memory card (continued) Notes ¥ In the memory card input mode, you can perform the operations described below using the menu screen settings.¥ Automatic input selection function When ÒInput select modeÓ 54 is set to ÒAuto.Ó, the mode automatically switches to the memory card input mode when a memory card is inserted. ¥ Auto slide show 1 When ÒAuto. demoÓ 48 is set to ÒOnÓ and a memory card is loaded, a slide show of the JPEG files in the root directory starts automatically when the memory card input mode is selected. ¥ Auto slide show 2 When ÒSlide showÓ 54 is set to ÒAuto.Ó, a slide show starts automatically at the place where the leading thumbnail appointed in the step 6. ¥ Auto slide show 3 When ÒInput select modeÓ is set to ÒAuto.Ó, ÒAuto. demoÓ is set to ÒOnÓ and memory card is loaded, a slide show of the JPEG files in the root directory starts automatically when the power is turned on. When ÒPower onÓ 67 is set to ÒAuto.Ó, the slide show starts when the power cord is plugged into an outlet. Press the EXIT button to stop the automatic slide show. * In this manual, ÒSlide showÓ means the operation by which slides (large images) are displayed in sequence.¥ With the factory default settings, the followings are set for manual operation. Input selection mode: Manual Auto. demo: Off Slide show: Manual Power on: Manual ¥ You can select the interval time of automatic slide show transition among four types on the menu screen. 48 Depending on the compression format of the JPEG files, however, it may take more than the set time to transit images. ¥ Depending on the compression format of the JPEG files and the file sizes, it may take a time for page changing or slide transition. ¥ The sort order (thumbnail displaying order = slide show order) of JPEG files is in character number order. When the number of characters is the same, the sort order is arranged by the numerical characters used in each file name at first and then the alphabetical characters.
45 CONTENTS Adjustments & Settings ¥ The menu screens for making various adjustments and settings include a QUICK MENU for frequently used adjustments and settings and a FULL MENU for all the adjustments and settings. The FULL MENU is divided into six sections by function: ÒPictureÓ, ÒAudioÓ, ÒKeystoneÓ, ÒDisplayÓ, ÒDefault settingÓ and ÒFactory reset modeÓ. ¥ The items in the ÒPictureÓ and ÒAudioÓ sections of the QUICK MENU and FULL MENU differ depending on the input source. ¥ Some of the adjustments and settings are stored separately for different input sources, others are applied to all input sources when they are set for one. For details, refer to the pages on which the individual adjustment and setting instructions are located. Adjustments and settings on the menu screenContrast Brightness Phase Picture mode Keystone Lamp power Input source setting LanguageLanguage No signal background Icon Menu positionMenu background translucentStart-up screenPicture only AllInput source setting Lamp power Projection mode No signal power off Power onContrast Brightness Phase Frequency Position Picture mode Screen size LevelSpeaker output Channel select (Mini) Loudness (Mini)KeystoneHorizontal reference value reset Contrast Brightness Picture mode Keystone Lamp power Input source setting LanguageLanguage No signal background Icon Menu positionMenu background translucentStart-up screenPicture only AllInput source setting Lamp power Projection mode No signal power off Power onContrast Brightness Position Picture mode Screen size LevelSpeaker output Channel select (Mini) Loudness (Mini)KeystoneHorizontal reference value reset Contrast Brightness Color Keystone Lamp power Input source setting LanguageLanguage No signal background Icon Menu positionMenu background translucentStart-up screenPicture only AllInput source setting Lamp power Projection mode No signal power off Power onContrast Brightness Color Tint Sharpness Signal format Screen size LevelSpeaker output Channel select (Mini) Loudness (Mini)KeystoneHorizontal reference value reset Contrast Brightness Color Keystone Lamp power Input source setting LanguageLanguage No signal background Icon Menu positionMenu background translucentStart-up screenPicture only AllInput source setting Lamp power Projection mode No signal power off Power onContrast Brightness Color Tint Sharpness Video mode Screen size LevelSpeaker output Channel select (RCA) Loudness (RCA) There is no audio signal in this input. There is no audio signal in this input. KeystoneHorizontal reference value reset Contrast Brightness Auto. demo Interval Keystone Lamp power Input source setting LanguageLanguage No signal background Icon Menu positionMenu background translucentStart-up screenPicture only AllInput source setting Lamp power Projection mode No signal power off Power onContrast Brightness Input select mode Auto. demo Slide show Interval Screen size LevelKeystoneHorizontal reference value reset Contrast Brightness Shutter Keystone Lamp power Input source setting LanguageLanguage No signal background Icon Menu positionMenu background translucentStart-up screenPicture only AllInput source setting Lamp power Projection mode No signal power off Power onContrast Brightness Sharpness Shutter Screen size LevelKeystoneHorizontal reference value reset Digital RGB Memory card Document imaging camera(With camera model) Y/P B/PR Analog RGB 1 Analog RGB 2 Video S-video FULL MENUQUICK MENU Picture Picture Picture Picture Picture Picture Audio Audio Audio Audio Audio Audio Keystone Keystone Keystone Keystone Keystone Keystone Display Display Display Display Display Display Default setting Default setting Default setting Default setting Default setting Default setting Factory reset mode Factory reset mode Factory reset mode Factory reset mode Factory reset mode Factory reset mode Continued
46 CONTENTS Adjustments & Settings Adjustments and settings on the menu screen (continued) 4854 6062646771 QUICK MENU Item Meaning Contrast Adjust the image contrast Brightness Adjust the image brightness (paying attention to the dark parts) Color Adjust the image color (except for RGB inputs) Phase Adjust the image flicker (analog RGB) Picture mode Set brightness priority or picture quality (color) priority (RGB) Auto. demo Set the automatic slide show function on and off (memory card) Interval Set the interval time to transit the automatic slide show (memory card) Shutter Set the shutter speed (document imaging camera) Keystone Adjust keystone distortion Lamp power Set the lamp power (cooling sound selection) Input source setting Set the input mode selected by the INPUT button Language Set the display language used for menus and messagesFULL MENU Picture Item Meaning Contrast Adjust the image contrast Brightness Adjust the image brightness Color Adjust the image color Tint Adjust the image tint Sharpness Adjust the image sharpness Phase Adjust the image flicker (dot clock timing adjustment) Frequency Adjust the vertical stripes with detailed images (dot clock frequency adjustment) Position Adjust the horizontal and vertical positions of the image Level Adjust the red, green and blue level (balance) Picture mode Set brightness priority or picture quality (color) priority Video mode Set the video or S-video color system Signal format Set the Y/P B/PR signal DTV format Screen size Set whether to convert to XGA size or display with the input resolution Input select mode Set the input selection Auto./Manual at memory card detection Auto. demo Set the automatic slide show On/Off at memory card detection Slide show Set slide show advancing Auto./Manual Interval Set the interval time to transit the automatic slide show Shutter Set the shutter speed according to the power supply frequency Audio (Adjust the audio output from the speaker on the main unit) Item Meaning Speaker output Set the speaker output On/Off Channel select (RCA) Select the channel of AUDIO (L/R) jack in VIDEO IN Loudness (RCA) Set the loudness of AUDIO (L/R) jack On/Off in VIDEO IN Channel select (Mini) Select the channel of AUDIO IN jack Loudness (Mini) Set the loudness of the AUDIO IN jack On/Off DisplayItem Meaning Language Set the display language used for menus and messages No signal background Set the background at no signal input Icon Set the icon display On/Off Menu position Set the position of the menu screen Menu background translucent Set the menu background translucent On/Off Start-up screen Set the start-up screen at power on Default setting Item Meaning Input source setting Set the input mode selected by the INPUT button Projection mode Set the direction of the screen according to the projection mode No signal power off Set the automatic power off function On/Off when no signal status continues Power on Set the power on On/Off when plugging the power cord Lamp power Set the lamp power (cooling sound selection) Keystone Item Meaning Keystone Adjust the Keystone distortion Horizontal reference value reset Reset the horizontal reference value for the automatic adjustment Factory reset mode Item Meaning Picture only Return the items of the picture menu to the factory default setting for each input source. All Return all of the items to the factory default setting for all input sources. Note An exclusive menu is displayed when making PIP function sub-picture settings. 73
47 CONTENTS Adjustments & Settings Operating the menu screen Analog RGB( 1) 000 +6 MENU EXIT QUICK MENUContrast BrightnessAdjust the contrast of the image.Picture mode Lamp power KeystoneInput source settingLanguage[ ENTER] [ ENTER] Hi Low Bright True color FULL Item Adjust QuitPhase Analog RGB( 1) QUICK MENU MENU EXIT FULL Item Change Back ENTERSet COMPUTER-1 COMPUTER-2VideoMemory cardCameraS-video Analog RGB( 1) Y/P B/PR Analog RGB( 2) Digital RGB Input source setting Analog RGB ( 1) Contrast Brightness Phase Frequency Position Picture mode Screen size Level +6 0 0 [ ENTER] [ ENTER] Bright True color Full Thru MENUPictureMENUMENUEXITQUICK Page Item Adjust Quit 0 LASER MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALLRESIZE VOLUME/ADJUST TEMPLAMP ONBUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.ON/STANDBY MENUMENU MENUMENU ENTERENTER EXITEXIT MENUMENU VOL/ADJSelectionMENU ENTER EXIT Press the MENU button to display the QUICK MENU. The FULL MENU appears when the MENU button is pressed. Press the EXIT button to end the adjust- ments and settings and turn the menu off. Adjustments and settings that have been made here are automatically stored in the memory when the power is turned off by the ON/STANDBY button. Use the VOL/ADJ (+/-) buttons to adjust or set the selected items.When the MENU button is pressed in the FULL MENU mode, the QUICK MENU reappears. The first menu displayed in the FULL MENU mode is the “Picture” menu. The sub-menus include items that are set by pressing the ENTER button. When a sub-menu is displayed, it will return to the previous menu by pressing the EXIT button. Sub-menu (example: input setting) Input source name Adjustment display bar Displayed for adjustable items Setting display buttons In the QUICK MENU screen, simple explanations of the selected items are displayed.Displayed for items set by selection. The setting displayed in yellow is the one currently set. Selected item (orange) The button operation guide is displayed here. The contents of the operation guide differ according to the type of menu and the selected item.There are also items with sub-menus displayed by pressing the ENTER button. Some items in the FULL MENU have sub-menus. Start Use the selection buttons ( / ) to select the item to be adjusted or set. Each press of the selection buttons ( / ) change the menus as shown: [Factory reset mode] [Default Settings] [Picture] [Audio] [Keystone] [Display] End
48 CONTENTS Adjustments & Settings Preparation1 Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 28 Press MENU.The QUICK MENU appears. 1 You can set the basic setting used frequently. QUICK MENU adjustments and settings LASER 1 1 MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY Analog RGB( 1) 000 +6 MENU EXIT QUICK MENUContrast BrightnessAdjust the contrast of the image.Picture mode Lamp power KeystoneInput source settingLanguage[ ENTER] [ ENTER] Hi Low Bright True color FULL Item Adjust QuitPhase MENUMENU ¥ To cancel the QUICK MENU screen, press the EXIT button. ¥ The contents of the menu are different depending on the type of input source currently selected. Continued Remote controlControl panel (Main unit side)
49 CONTENTS Adjustments & Settings 2 2 LASER MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY QUICK MENU adjustments and settings (continued) Use the selection buttons ( / ) to select the adjustment and setting items. The types of adjustment and setting items are different depending on the type of input source currently selected. (See the table below.) 2Note The ÒKeystoneÓ adjustment and the ÒLamp PowerÓ, ÒInput source settingÓ and ÒLanguageÓ settings are applied to all the input sources. (It is impossible to make different settings for each input source.) Other items marked ÒOÓ can be adjusted or set respectively for the different input sources. Adjustments Inputs Items Analog RGB1 Analog RGB2 Digital RGB Y/P B/PR Video S-video Memory Card oooooooo oooooooo xxxoooxx ooxxxxxx o (same for all of the inputs) Analog RGB1 Analog RGB2 Digital RGB Y/P B/PR Video S-video Memory Card oooxxxxx o (same for all of the inputs) o (same for all of the inputs) o (same for all of the inputs) xxxxxxox xxxxxxox xxxxxxxo Settings Inputs Items o: Adjustable x: Not displayed Contrast Brightness Color Phase Keystone Document Imaging Camera Document Imaging Camera Picture mode Lamp powerInput source settingLanguage Auto. demo Interval Shutter o: Adjustable x: Not displayedContinued Remote controlControl panel (Main unit side)
50 CONTENTS Adjustments & Settings 3-a 3-a MENUON/STANDBY INPUT L-CLICK R-CLICK ENTERKEYSTONE AUTO SET EXIT PIPFREEZEMUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY FANKEYSTONESET AUTO AUTO EXIT ENTER MENUINPUTVOL/ADJ.TEMPLAMP ONBUSY FANON/STANDBY KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT VOL/ADJ.ON/STANDBY LASER 3-a Press VOL/ADJ (+/ -) to adjust and set. Adjustments Buttons Items (-) (+) Contrast Lower Higher Brightness Darker Brighter Color Thinner Deeper Phase Adjust flickers Adjust flickers Keystone Reduce the lower width Reduce the upper width Settings Picture mode (Analog RGB input, digital RGB input)Bright: Set the picture with its brightness priority. True color: Set the picture with its quality (color) priority.Lamp powerHi: Set the lamp mode with brightness priority. Low: Restrict the lamp output to reduce the cooling sound.Auto. demo (Memory card input)On: When a memory card is detected while the memory card input mode is selected, a slide show using the image data in the root directory starts automatically.Shutter (Document imaging camera input)Set to the frequency (50/60 Hz) of the power supply in your area. Note The cooling sound changes according to the temperature inside the projector. When the lamp power setting is changed, the brightness changes immediately, but the cooling sound level does not change immediately. QUICK MENU adjustments and settings (continued) Continued Remote controlControl panel (Main unit side) When selecting ÒContrastÓ, ÒBrightnessÓ, ÒColorÓ, ÒPhaseÓ, ÒKeystoneÓ, ÒPicture modeÓ, ÒLamp powerÓ, ÒAuto. demoÓ or ÒShutterÓ in step 2.