Toshiba Projector Tlp X11u User Manual

							51
CONTENTS
Adjustments &
Settings
When selecting ÒInput source settingÓ in step 2. (Set the input source that can be selected
by the INPUT button.)
Use the selection buttons (
 / 
) to select the
input source to be set, then press ENTER to
check it.
¥  The check turns on and off each time the ENTER button is
pressed.
¥ When a check box is checked, that input source can be
selected by the INPUT button.(When selecting COMPUTER-1 and COMPUTER-2)Press VOL/ADJ (+/
-) to select the type of input
source.
The setting whose button is displayed in yellow is the one
currently selected.Press EXIT to return to the QUICK MENU. Press ENTER.The sub-menu screen of input source setting appears.
QUICK MENU adjustments and settings (continued)
LASER
3-b
3-b3-b
3-b3-b
3-b
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
Menu items Main unit indication
COMPUTER-1 COMPUTER IN 1
COMPUTER-2
COMPUTER IN 2
Video VIDEO
S-video S-VIDEO
Memory card
Camera
Document imaging camera 
(For the model with camera)
Analog RGB(
1)
QUICK MENUMENU
EXIT
FULL
Item
Change Back
ENTERSet
COMPUTER-1
COMPUTER-2VideoMemory cardCameraS-video
Analog RGB(
1)
Y/PB/PR
Analog RGB(
2)
Digital RGB
Input source setting
Notes
¥ It is impossible to exit from the menu if no input source is selected.
¥ If the check in the check box for the currently selected source is removed, the setting becomes
effective the next time the input is changed.
¥ For the memory card and document imaging camera, there are modes in which these can be
selected even if their check box is not checked. 
56
 77
ENTERENTER
Continued
ENTERENTER
EXITEXIT
Remote controlControl panel
(Main unit side)
3-b 
						

							52
CONTENTS
Adjustments &
Settings
QUICK MENU adjustments and settings (continued)
LASER
3-c
3-c
3-c
3-c3-c
3-c
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
When selecting ÒLanguageÓ in step 2. (Set the language used in the menu display.)
Press ENTER.The sub-menu screen of language setting appears.Use the selection buttons (
 / 
) to select a
language.
Press EXIT to return to the QUICK MENU.
ENTERENTEREXITEXIT
Analog RGB(
1)
MENU
EXIT
LanguageQUICK MENUFULL
Select
Back
English
Français
Deutsch
Italiano
Español
Português
: English
: French
: German
: Italian
: Spanish
: Portuguese
: Japanese
: Chinese (Simplified)
: Chinese (Traditional)
: Korean
Continued
Remote controlControl panel
(Main unit side)
3-c 
						

							53
CONTENTS
Adjustments &
Settings
QUICK MENU adjustments and settings (continued)
3-d
Press ENTER.The sub-menu screen of interval setting appears.Use the selection buttons (
 / 
) to select
interval time.
10 sec.
30 sec.
3 min.
10 min.
Depending on the compression format of the JPEG files, it may
take more time than the setting value.
Press EXIT to return to the QUICK MENU.
4
After the adjustments and settings are finished,
press EXIT.The menu screen disappears.
LASER
3-d,
4
3-d
3-d,
4
3-d3-d
3-d
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
ENTERENTEREXITEXIT
When selecting ÒIntervalÓ in step 2. (Set the interval time of the automatic slide show.)
Memory card
Interval10 sec.
30 sec.
3 min.
10 min.
MENU
EXIT
QUICK MENUFULL
Select
Back
EXITEXIT
Notes
¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
made are automatically stored in the memory. If the power cord is unplugged or if a power
failure occurs while the projector is on, the adjustments or settings are not stored in the
memory.
¥ The adjustments or settings are stored for each of the items marked Ò
OÓ in the table in step 2.
Remote controlControl panel
(Main unit side) 
						

							54
CONTENTS
Adjustments &
Settings
2
Press MENU twice.When pressed once, the QUICK MENU screen appears. When
pressed twice, the ÒPictureÓ screen of the FULL MENU appears.
1
LASER
1
12
2
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP
ONBUSYFANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
You can adjust contrast, brightness, color
level, image position, etc.Preparation
1
Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
28
Analog RGB (
1)
Contrast
Brightness
Phase
Frequency
Position
Picture mode
Screen size
Level
+6
0
0
0
[
ENTER]
[
ENTER] Bright True color
Full Thru
MENUPictureMENUMENUEXITQUICK
Page
Item
Adjust
Quit
Analog RGB(
1)
000 +6
MENU
EXIT
QUICK MENUContrast
BrightnessAdjust the contrast of the image.Picture mode
Lamp power KeystoneInput source settingLanguage[
ENTER] [
ENTER] Hi Low Bright
True color
FULL Item Adjust QuitPhase
Use the selection buttons (
 / 
) to select the
adjustment and setting items.
The types of adjustment and setting items are different
depending on the type of input source currently selected.
(See the table below.)
MENUMENU
Continued
FULL MENU adjustments and settings Ð
 Picture
Remote controlControl panel
(Main unit side)
*1 *1
*2*2
Analog RGB1 Analog RGB2 Digital RGB Y/P
B/PR
Video S-video Memory Card
oooo oooo
oooo oooo
xxxoooxx
xxxoooxx
xx xoooxo
ooxx xxxx
ooxx xxxx
ooox xxxx
oooo oooo
Adjustments
Inputs
Items
*1: Adjustment is impossible at 480i mode.*2: Adjustment is impossible at PAL/SECAM.
o: Adjustable
  x: Not displayed
Document 
Imaging Camera
Contrast
Brightness
Color
Tint
Sharpness
Phase
Frequency
Position
Level 
						

							55
CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings Ð Picture (continued)
3-a
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.
3-a
3-a
TEMPLAMP
ONBUSY FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
2
2
Analog RGB1 Analog RGB2 Digital RGB Y/P
B/PR
Video S-video Memory Card
oooxxxxx
oooooooo
xxxoxxxx
xxxxooxx
xxxxxxox
xxxxxxox
xxxxxxox
xxxxxxox
xxxxxxxo
Settings
Inputs
Items
o: Settable
  x: Not displayed
Picture mode
Screen size
Signal format
Video mode
Input select modeAuto. demo
Slide show
Interval
Shutter
Document 
Imaging Camera
When selecting ÒContrastÓ, ÒBrightnessÓ, ÒColorÓ, ÒTintÓ, ÒSharpnessÓ, ÒPhaseÓ, ÒFrequencyÓ,
ÒPicture modeÓ, ÒScreen sizeÓ, ÒInput select modeÓ, ÒAuto. demoÓ or ÒSlide showÓ in step 2.2
(Continued)
Press VOL/ADJ (+/
-) to adjust and set.
(-) (+)
Contrast Lower Higher
Brightness Darker Brighter
Color Thinner Deeper
Tint Redder Greener
Sharpness Softer Sharper
Phase Adjust flickers Adjust flickers
Frequency Adjust vertical stripes Adjust vertical stripes Adjustments
Buttons
Items
Continued
Remote controlControl panel
(Main unit side) 
						

							56
CONTENTS
Adjustments &
Settings
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.
3-a
3-a
TEMPLAMP
ONBUSY FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
(Continued)
3-a
Picture mode (RGB input)Bright: Set the picture with its brightness priority.
True color: Set the picture with its quality (color) priority.Screen sizeFull: Images are converted to display in 1024 x 768 dots.
In the memory card input mode, if the image dataÕs aspect
ratio is anything other than 4:3, the image is adjusted so that
either the width or the height (the larger of the two) becomes
full size.  Note that images of 640 x 480 dots or smaller
cannot be displayed in full size.
Thru: Images are displayed in the input resolution.
Parts larger than 1024 x 768 dots are not displayed.
Note that only signal sources whose clock frequency is 140
MHz or less can be displayed at the input resolution.
Wide:
To display a wide screen image compressed in a left-r ight
squeeze operation by a DVD player, etc. in an original wide
screen size.
Input select mode (Memory card input)Auto: Regardless of the setting by the ÒInput source settingÓ
menu, the input source automatically switches to the
memory card input mode when a memory card is detected.
Manual: Set the mode according to the setting by the ÒInput source
settingÓ menu.Auto. demo (Memory card input)On:
When a memory card is detected while the memory card input
mode is selected, a slide show using the image data recorded
in the root directory of memory card starts automatically.
Slide show (Memory card input)You can set when the ÒAuto. demoÓ is Off.
Auto: Execute the slide show automatically.
Manual: Execute the slide show manually.Shutter (Document imaging camera)Set to the frequency (50/60 Hz) of the power supply in your area.
Continued
FULL MENU adjustments and settings Ð Picture (continued)Remote controlControl panel
(Main unit side)
Settings 
						

							57
CONTENTS
Adjustments &
Settings
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.
3-b
3-b3-b
3-b
3-b3-b
3-b3-b
TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
FULL MENU adjustments and settings Ð Picture (continued)
3-b
ENTERENTER
When selecting ÒPositionÓ or ÒLevelÓ in step 2.
EXITEXIT
Press ENTER.The sub-menu of selected items appears.
ÒPositionÓ ÒLevelÓUse the selection buttons (
 / 
) to select
adjustment items.
Press VOL/ADJ (+/
-) to adjust.
Press EXIT to return to the FULL MENU.
(-) (+)
H-position
Move the picture leftward Move the picture rightward
V-position Move the picture down Move the picture upward
R-level To reduce red To increase red
G-level To reduce green To increase green
B-level To reduce blue To increase blue
Buttons
Items
Position
Level
Continued
Remote controlControl panel
(Main unit side)
Analog RGB(
1)
Picture
R-levelLevelG-levelB-level
+3
0
0
MENU
EXIT
QUICK
Item
Adjust
Back
Analog RGB(
1)
Picture
H-position
V-position
+3
0
Position
MENU
EXIT
QUICK
Item Adjust Back 
						

							58
CONTENTS
Adjustments &
Settings
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.
3-c3-c
3-c
3-c
TEMPLAMP
ONBUSY FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
FULL MENU adjustments and settings Ð Picture (continued)
3-c
ENTERENTER
When selecting ÒSignal formatÓ, ÒVideo modeÓ or ÒIntervalÓ  in step 2.
Memory card
Picture
Interval
10sec.
30sec.
3min.
10min.
MENU
EXIT
QUICK
Select
Back
Video
Picture
Video mode
Auto.
NTSC
PA L
SECAM
PAL-M
PAL-N
PAL60
NTSC4.43
MENU
EXIT
QUICK
Select Back
Y/PB/PR
Picture
Signal format
Auto.
480i
480p
720p
1080i
MENU
EXIT
QUICK
Select Back
Press ENTER.The sub-menu of selected items appears.
ÒSignal formatÓ ÒVideo modeÓ
ÒIntervalÓ
Use the selection buttons (
 / 
) to select
setting items.
Signal format (Y/P
B/PR input)
Auto: Determine the type of the signal input automatically.
If not determined properly, select among the signals shown below.
480i, 480p, 720p, 1080iVideo mode (Video input, S-video input)Auto: Determine the type of the signal input automatically.
If not determined properly, select among the signals shown below.
NTSC, PAL, SECAM, PAL-M, PAL-N, PAL60, NTSC4.43
Continued
Remote controlControl panel
(Main unit side) 
						

							59
CONTENTS
Adjustments &
Settings
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.
3-c,4
3-c,
4
3-c
3-c
TEMPLAMP
ONBUSY FANON/STANDBY
KEYSTONESET AUTO
AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
(Continued)
Interval (Memory card input)Select the display interval (time) for the auto. demo and auto. slide
show.  (10 sec., 30 sec., 3 min. or 10 min.)
Depending on the compression format of the JPEG files, it may take
more time than the setting value.Press EXIT to return to the FULL MENU.
After the adjustments and settings are finished,
press EXIT.The menu screen disappears.
EXITEXITEXITEXIT
Notes
¥ If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
made are automatically stored in the memory. If the power cord is unplugged or if a power
failure occurs while the projector is on, the adjustments or settings are not stored in the
memory.
¥ The adjustments or settings are stored for each of the items marked Ò
OÓ in the table in step 2.
(It is impossible to store adjustments for each video mode or signal format.)
43-c
FULL MENU adjustments and settings Ð Picture (continued)Remote controlControl panel
(Main unit side) 
						

							60
CONTENTS
Adjustments &
Settings
1
12,3
3 2
MENUON/STANDBY INPUT
L-CLICK R-CLICK
ENTERKEYSTONE
AUTO
SET
EXIT
PIPFREEZEMUTE CALL
RESIZE
VOLUME/ADJUST
TEMP
LAMP ON
BUSY FANKEYSTONESET AUTO AUTO
EXIT ENTER
MENUINPUTVOL/ADJ.TEMPLAMP ONBUSYFA NON/STANDBY
KEYSTONESET AUTO AUTOEXIT ENTERMENUINPUT
VOL/ADJ.ON/STANDBY
LASER
Preparation1
Project a picture on the screen as explained in the step ÒProjection on the screenÓ. 
28
Video
Contrast
Brightness
Color
Tint
Sharpness
Video mode
Screen size
Level
+6
0
0
0
0
[
ENTER]
[
ENTER] Full WideThru
MENUPictureMENU MENUEXITQUICK
Page
Item
Adjust
Quit
Video
Color
+6000
MENU
EXIT
QUICK MENUContrast
BrightnessAdjust the contrast of the image.Lamp power KeystoneInput source settingLanguage[
ENTER] [
ENTER] Hi LowFULL Item Adjust Quit
Video
AudioMENU
Speaker outputChannel select (
Mini)
On
OffEXIT
QUICK
Item
Set
Quit
Page
Loudness (
Mini)L+R L
On
OffR
Press MENU twice.When pressed once, the QUICK MENU screen appears. When
pressed twice, the ÒPictureÓ screen of the FULL MENU appears.
1
MENUMENU
2
Use the selection button (
) to display the
ÒAudioÓ menu.
If you pass by the ÒAudioÓ menu, press the selection button (
)
to move back to it.
Use the selection buttons (
 / 
) to select the
setting items.
(RCA): Audio input jack (R-AUDIO-L) of VIDEO IN
(Mini): AUDIO IN jack
3
Continued
FULL MENU settings Ð Audio
You can set the audio signals developed
from the speaker. (The speaker output is
monaural.)
Remote controlControl panel
(Main unit side)