Toshiba Projector Tlp Wx2200 User Manual

21
20
Preparations
Placement StylesAs shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the
Default setting 2  menu, in accordance with your needs. 
p.42
Placement
 WARNING
•Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
• If you...

23 22
Preparations
p.54
Video recorder,
DVD player, etc.
To audio output
White (L)/Red (R)
S-video cable
(not supplied)
To S-video output
Before connection•Read the owner’s manual of the device you are connecting to the projector.
•Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal 
p.52
, etc.
•Turn off the power of both devices before connecting.
•The figure is a sample connection. This does not mean that all of these devices can or...

25
Operations
24
Notes
•The start-up screen will disappear after a moment. You can dismiss the start-up screen
before this by performing any operation. You can also configure the start-up screen not to
appear via the  Display setting  menu 
p.38
.
• The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed 
p.26
.
• Beep sound can be set not to beep in the  Default setting 1 menu 
p.41
.
• When [ Key lock ] is [On], the operation buttons of the...

27
Operations
26
5
Projector placement angle adjustmentsThe placement angle and the height of the projected image can be adjusted by the foot
adjuster.qLift up the front of the projector to
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
wTo fine adjust the angle, twist the
foot adjuster.
eTo adjust the horizontal angle, use
the right and left tilt adjusters.•To stow the foot adjuster, hold up the projec-
tor while...

29
Operations
28
Adjusting Keystone distortion [Auto]2
Press the 
 button.
The keystone distortion is automatically corrected. The 
 icon appears during this
correction.
When adjustment is finished, the Keystone menu appears again. For fine adjust-
ment, select [V-keystone] by the 
 button and adjust image manually by the 
 buttons.
Adjusting Keystone distortion [Manual]2
Select [V-keystone] by the 
 button.
3
Use the 
 
 buttons for keystone adjustment.
Note•Depending on the amount of keystone...

31
Operations
30
Using handy features (Continued)
■Changing screen size
The screen size for the projected image can be changed.
Press the remote control’s SCREEN SIZE button.Pressing the button switches Normal/Full/Thru/4:3 Zoom in turn.Notes•Thru display is available for computer-input images.
•[ Screen size ] of the Display setting  menu has the same functionp.38
.
• If you use this function on commercial video software, broadcast
or cable-broadcasting except for the purpose of your private
viewing and...

33
Operations
32
How to set password (from [Off] to [On])
1
Select [Password] in the Default setting 2 menu and press the 
 or
 button.
2
Select [Password setting] in the password registration, setting menu,
and press the 
 or 
 button.
3
Select [On].
4
Select [OK] and press the 
 button.
The password entry screen is displayed.
5
Enter the password using numeric keys of the remote control.
6
The password setting will be set as [On].How to operate when password is [On]
1
Turn on the power.
2
The lamp...

35
Operations
34
You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons 
p.16
 on the control panel (main unit side) and remote control.
■How to use the menus
The menu shown below is for operation instructions purposes and might differ from the
actual display.
Using the menus
Toggle items with            .  
Select items with             and press       . 
Fix selection with       .
Display the Setting display menu.
1. Press the MENU button
2. Select...

37
Operations
36
Item 
  
Description
Computer Y/P
B/PR
Video
S-video
Position
 V-positionYe s N o N o N o
Adjust the vertical position of the image. Clamp 1Ye s N o N o N o
Adjusts the clamp pulse position. Clamp 2Ye s N o N o N o
Adjusts the clamp pulse width.
*1: [Noise reduction] may not work depending on signal type.
*2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US...

39
Operations
38
Detailed description
[Screen size ]•Normal :Enlarge an input image to fit the screen without changing the aspect
ratio of video signals.
• Full :Displays an input image in 1280  × 800 dot resolution by enlarging it to
fill the entire screen.
• Thru :Displays an input image in the native resolution of the video signals.
Thru display is not available for Y/P
B/PR, Video and S-Video-input
images.
The larger image than the screen size will be displayed over the
screen. The input image may...