Toshiba Projector Tlp S10 User Manual
Have a look at the manual Toshiba Projector Tlp S10 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
31
Operations
30
The display setting menuUse this menu to set screen display-related items.
(Full): Display with LCD panel’s resolution
(Thru): Display with sampling resolution (for computer input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
B/PR)
Select one of the languages below to use for displaying menus and messages[ : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/
Português/ / /...](http://img.usermanuals.tech/thumb/76/96985/w64_toshiba-tlp-s10u-manual_d-15.png "Page 16
31
Operations
30
The display setting menuUse this menu to set screen display-related items.
(Full): Display with LCD panel’s resolution
(Thru): Display with sampling resolution (for computer input)
(Wide): Wide-screen display (for Video, S-video, and Y/P
B/PR)
Select one of the languages below to use for displaying menus and messages[ : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/
Português/ / /...")
40 CONTROL terminalPin assignment 7 6 8 5 43 21 Signal Name RXD CTS DSR GND RTS N.C TXD N.C Pin No. 1 2 3 4 5 6 7 8Description Receiving data Consent to send Data set ready Signal ground Request to send No connection Sending data No connection Mini DIN 8 pin connector Interface format 1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits; Stop Bit Length: 1 bit 2 Communication format STX (02h) Command (3Byte) ETX (03h) Only 1 command valid per communication. 3 Data format For input commands, only ASCII-compliant all-uppercase alphanumeric characters supported. 4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended ACK (06h) ESC (1Bh) ... Aborted No acknowledge NAK (15h) If commands are to be sent consecutively, wait for the response from the projector before sending the next command. Main CommandsNote •Contact your dealer for control cable and other commands.Separately Sold Product Replacement Lamp Model TLPLV3Note •Design, specifications, etc. subject to change without notice for improvements, etc. Item Command Power onPONPower offPOFIcon display onMO0Icon display offMO1Auto setting (RGB input)PATStatus display onDON Status display offDOF Specifications (Continued) Item Command Computer input selectIN1Y/P B/PR input selectIN2 Video input selectIN3 S-video input selectIN4