Toshiba Projector Tlp S10 User Manual

Others
Maintenance
Operations
Preparations
Before Using
OWNER’S MANUAL
3LCD DATA PROJECTOR
TLP-S10(SVGA) 

Before Using
23
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated dangerous voltage
within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:TO...

Before Using
45
5. Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves, or
other products (including
amplifiers) that produce heat.
6. Water and Moisture
Do not use this product near water.- for example, near a bath tub,
wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a
swimming pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning.  Do not use
liquid cleaners or aerosol cleaners.
Use a soft cloth for...

Before Using
67
IMPORTANT SAFETY INSTRUCTIONS  (Continued)16. Damage Requiring Service
Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
a) When the power-supply cord or
plug is damaged.
b) If liquid has been spilled, or
objects have fallen into the
product.
c) If the product has been exposed to
rain or water.
d) If the product does not operate
normally by following the operating
instructions.  Adjust only those
controls that are...

Before Using
89
LABEL LOCATIONS
MANUFACTURED;SERIAL NO.
WARNING Label
CAUTION Label MODEL NO. /
RATING Label
SERIAL NO. Label
WARNING Label
CAUTION Label
If your line voltage is 220 to 240V, use one of the following types of cable.Plug
configurationPlug type
Australian
240V
10A
North American240V
15A Switzerland
240V
6A
Line voltage
EURO
UK 220 – 240V
220 – 240V 200 – 240V
200 – 240V 200 – 240V
Plug
configuration
Plug type Line voltage
Use a 5A fuse which is approved by ASTA 
or BSI to BSI362.
Always...

Before Using
1011
IMPORTANT PRECAUTIONS  (Continued)
Avoid Volatile LiquidDo not use volatile liquids, such as an insect spray, near the unit.  Do not leave rubber or
plastic products touching the unit for a long time.  They will leave marks on the finish.
If cleaning with a chemically saturated cloth, be sure to follow the products precautions.LCD PanelThe life of the LCD panel is limited.  Take care over the points below so as to use the
panel for years.
•To prolong the life of this panel, never fail...

Before Using
1213
CONTENTSBefore UsingSAFETY PRECAUTIONS ........................................................................\
........ 2
IMPORTANT SAFETY INSTRUCTIONS ......................................................... 3
LABEL LOCATIONS ........................................................................\
................ 8
POWER SUPPLY CORD SELECTION ............................................................ 9
IMPORTANT PRECAUTIONS...

15
14
Preparations
(10)
(12) (11)(13) (11)
(14)
(1)(16) (15) (17)
(5)
COMPUTER-
(
Y/PB/PR )
S-VIDEO VIDEOVIDEO
AUDIO
MONITOR
CONTROL(18)(19)
(4) (2)(3) (1)
(5) (7)(6)(9)
(8)(4)
Names of each part on the main unit
Name : Function
(1) Infrared remote sensor : Senses commands from the remote control. 
p.17
(2) Lens : Projects expanded image.
(3) Focusing ring : Adjusts screen focus. 
p.23
(4) Air intake : Draws in air from outside unit.
(5) Tilt adjuster : Adjusts the projector’s horizontal tilt. 
p.23
(6)...

17
16
Preparations
Operating the remote
controlPoint the remote control toward the
projector’s infrared remote sensor,
and press a button on the remote
control.• Operating the projector from the front
Approx. 15°
Approx. 5m
•Operating the projector from the rear
Approx. 15°
Approx. 5m
Loading dry-cell batteries
into the remote controlqRemove the battery cover.wInsert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.Two batteries (R03, SIZE AAA) are
used....

19
18
Preparations
COMPUTER-(Y/PB/PR )
S-VIDEO
VIDEO VIDEO
AUDIO
MONITOR
CONTROL
p.40
Before connection• Read the owner’s manual of the device to connect to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal 
p.38
, etc.
• Turn off the power of both devices before connecting.
• The figure below is a sample connection. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines...