Toshiba Projector Tlp 551 User Manual
Here you can view all the pages of manual Toshiba Projector Tlp 551 User Manual. The Toshiba manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
61 Maintenance CONTENTSAir filter cleaning CAUTION If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning. The filter inside the air filter cover is the part to shut out dusts or dregs. Do not use the projector with the filter taken off. We recommend you clean the air filter frequently. (The cleaning period is once per 50 hours approximately).2 1 Unplug the power cord. Take off the front cover. Slide the front cover rightward side for about 3 mm,...
Page 62
62 Maintenance CONTENTSAir filter cleaning (continued) Mount the air filter and the filter frame. Place the air filter in the projector, then insert the four tabs on the filter frame into the holes in the projector. Mount the front cover. Insert the hooks of the front cover into the projector first, then slide it to the lens side to fix it. 5 6 2 1 Air filter Filter frame Notes •When the air filter is dusty, the ventilation is impaired. This causes the temperature inside the projector to rise, and may...
Page 63
63 Maintenance CONTENTS Cleaning the lens Use a blower or a lens cleaner to clean the lens. Never rub or tap the lens with a hard object as the lens surface is fragile. Lens and main unit cleaning Cleaning the main unit •Pull out the power cord before cleaning. •Use a soft cloth to wipe off stains from the surface. •To remove difficult stains, use a soft cloth slightly moistened with a weak solution of synthetic detergent and water, and finish with a soft, dry cloth. Replacing the intake, exhaust fans...
Page 64
64 Maintenance CONTENTSLamp replacement The lamp will eventually begin to project dark or dull pictures and finally will not light up. (Lamp’s life depends on operating conditions.) In such a case, replace the lamp with new one. CAUTION •If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning or replacement of the lamp. •When replacing, always use lamp “TLPL55” (sold separately). For details, refer to the lamp instruction. •If you have been using the...
Page 65
65 Maintenance CONTENTS Notes •When the CALL button is pressed, the “Lamp time” (the approximate amount of time the lamp has been used) will be displayed. 39 •The lamp should be replaced if the total working time exceeds about 1,500 hours. When the “Lamp time” is displayed as 1500 hours, the icon and a message appear. They will disappear when you do some operation. •Attach the lamp cover firmly after replacing the lamp. If it is not set correctly, the power will not turn on. •Use a new lamp when...
Page 66
66 Others CONTENTSBefore calling service personal Symptom The power does not come on. The power turns off while using the projector. No image appears. No sound is heard. Desired input source cannot be selected by the INPUT button. Analog RGB input or Y/P B/PR input colors are not right. The image is blurred. Focusing is uneven. The picture is dim. The color is faint. The tint is not good. Cause • The power cord is disconnected. • The lamp cover is not attached correctly. • The ambient temperature of the...
Page 67
67 Others CONTENTS Symptom The remote control does not work. The presentation made cannot be used from the remote control unit. Document camera image is blurry. Document camera image flickers. Cause • The remote control is not facing the remote sensor. • The remote control is too far away. • There is an obstruction between the remote control and the remote sensor. • The batteries are exhausted. • The USB cable is not properly connected. • The computer or OS is not compatible. • The batteries are...
Page 68
68 Others CONTENTS Mini D-sub 15pin connector Pin assignment of COMPUTER connector COMPUTERInput signal Analog R, G, B signal: 0.7V(p-p) 75Ω Horizontal sync signal: TTL level (positive/negative polarity) Vertical sync signal: TTL level (positive/negative polarity) Y signal: 1.0V(p-p) 75Ω P B, PR signal: 0.7V(p-p) 75Ω Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RGB input Video signal (Red) Video signal (Green) Video signal (Blue) GND GND GND (Red) GND (Green) GND (Blue) N.C GND GND DDC data Horizontal...
Page 69
69 Others CONTENTS TEXT70 640 x 350 50 640 14 96 800 31.469 70.086 25.175 59 350 38 2 449 TEXT70 640 x 400 50 640 14 96 800 31.469 70.086 25.175 34 400 13 2 449 TEXT85 640 x 350 96 640 32 64 832 37.861 85.080 31.500 60 350 32 3 445 TEXT85 640 x 400 96 640 32 64 832 37.861 85.080 31.500 41 400 1 3 445 NEC PC98 24k 640 x 400 85 640 59 64 848 24.820 55.900 21.047 25 400 11 8 444 VGA60640 x 480 48 640 16 96 800 31.469 59.940 25.175 33 480 10 2 525 VGA72640 x 480 128 640 24 40 832 37.861 72.809 31.500 28 480...
Page 70
70 Others CONTENTSApplicable signal (continued) Timing chart (Continued) **SXGA1152x864 75Hz 1152 x 864 256 1152 64 128 1600 67.500 75.000 108.000 32 864 1 3 900 **SXGA1280x960 60Hz 1280 x 960 312 1280 96 112 1800 60.000 60.000 108.000 36 960 1 3 1000 **SXGA1280x960 85Hz 1280 x 960 224 1280 64 160 1728 85.938 85.002 148.500 47 960 1 3 1011 **SXGA1280x1024 60Hz 1280 x 1024 248 1280 48 112 1688 63.981 60.020 108.000 38 1024 1 3 1066 **SXGA1280x1024 75Hz 1280 x 1024 248 1280 16 144 1688 79.976 75.025...