Toshiba Projector Tlp 551 User Manual

41
Operations
CONTENTSOperating the presentation mode (continued)
Adjust the projector before presentation if
necessary.
In the presentation mode after step 5, the projector cannot be
adjusted.
4
MENU
ON /INPUT
ENTER
CT-90106
KEYSTONE AUTO SET
EXIT /
P.MODE
PIP FREEZE
MUTE
CALLRESIZE
VOL / ADJ
STANDBY
3
6
5,7
3
P.MODE
KEYSTONE
AUTOSET
EXIT
ON / STANDBY
VOL / ADJ
ENTER
MENU
INPUT
FANTEMPLAMPON
Remote control
Control panel
(Main unit side)
3
5
Press P.MODE and hold for two seconds.
The projector enters...

42CONTENTS
Adjustments &
Settings
Operating the menu screen
Continued
FULLItemNextQuit
Adjust the image brightness.
Select the image with its brightness priority or quality (color)priority.Correct the keystone distortion of the screen.Select the input source when changing the input.
Adjust the image flicker.
EXITENTERMENU
GUIDE MENUAnalog RGB
Items
Button operation guideThe current input source
MENU
ENTER
CT-90106EXIT /
P.MODE
VOL / ADJ
End
Press MENU.Then GUIDE MENU appears.  (Then FULL MENU 
appears if...

43CONTENTS
Adjustments &
Settings
Operating the menu screen (continued)
Analog RGB
GUIDEItemExecuteQuit
Picture
Contrast-12-
-12-
Bright
FullFull
Thru Brightness
Picture mode
Screen size
Reset
EXITENTERMENUPageAdjust
Kind (page) of 
FULL MENU
Items
Button operation guide The current input source
Adjustment
display bar
Choices
End
Select the item with selection buttons (          ).
State of a figure below is a sample for explanation. 
This state does not in fact./
Press ENTER.
The Item selected is...

44CONTENTS
Adjustments &
Settings
GUIDE MENU adjustments and settings
Adjust the contrast of the picture.
Adjust the brightness of the picture.
Adjust the flicker of the picture. (Sampling clock phase adjustment)
The picture is set with its brightness priority.
The picture is set with its color quality priority.
Adjust the keystone distortion. Adjust the color depth of the picture.
Adjust the document imaging cameras gain.
Select a shutter speed below to decrease the flickering of the document imaging...

45CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Picture
Adjust the contrast of the picture.
Adjust the brightness of the picture.
Adjust the sharpness of the picture. (In Y/PB/PR input mode, sharpness is a setting item.)
The picture is set with its brightness priority.
The picture is set with its color quality priority. Adjust the document imaging cameras gain.
The video mode (color system) is set automatically.
The video mode is fixed to NTSC system.
The video mode is fixed to...

46CONTENTS
Adjustments &
Settings
FULL MENU adjustments - Position
Adjust the horizontal display position of the picture.
Adjust the vertical display position of the picture.
Adjust the flicker of the picture. (Sampling clock phase adjustment)
Adjust the sampling frequency of the input signal if vertical stripes appear in the detailed image.
Return the adjustments of FULL MENU [Position] to the factory default values.
-
-
-
-
--
-
-
-
--
-
-
-
--
-
-
-
- Ye s
Ye s
Ye s
Ye s
Ye s
Y/PB/PRVideo
The...

47CONTENTS
Adjustments &
Settings
FULL MENU adjustments - Color
Adjust the color depth of the picture.
Adjust the tint of the picture. (Not adjustable at PAL, SECAM, PAL-N,PAL-M and PAL60)
Adjust the red level of the picture.
Adjust the green level of the picture.
Adjust the blue level of the picture.
Return the adjustments of FULL MENU [Color] to the factory default value.Ye s
Ye s
Ye s
Ye s- -
Ye s
Ye s
Ye s
Ye s- Ye s
Ye s
Ye s
Ye s
Ye s Ye s Ye s
Ye s
Ye s
Ye s
Ye sYe s Ye s
Ye s
Ye s
Ye s
Ye s- -...

48CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Audio
Adjust the sound volume emitted from the speaker.
The sound is emitted from the speaker.
No sound is emitted from the speaker.
Return the adjustments and settings of FULL MENU [Audio] to the factory default values.
The loudness effect is added to the speaker sound.
The loudness effect is not added to the speaker sound.
The sound of the left and right channels is mixed and emitted from the speaker.
Only the sound of the left...

49CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Display
Adjust the keystone distortion caused by changing the installation angle.
Menus and messages are displayed in English.
Menus and messages are displayed in French.
Menus and messages are displayed in 
Portuguese.
Menus and messages are displayed in Japanese.
Menus and messages are displayed in German.
Menus and messages are displayed in Italian.
Menus and messages are displayed in 
Spanish.
Menus and messages are displayed in...

50CONTENTS
Adjustments &
Settings
FULL MENU settings - Default setting
Return the settings of FULL MENU [Default setting] to the factory default values.
The projector is set to the floor-mounted front projection mode.
The projector is set to the floor-mounted rear projection mode.
The projector is set to the ceiling-mounted front projection mode.
The projector is set to the ceiling-mounted rear projection mode.
The TOSHIBA logo is displayed when no signal is input.
The entire screen is set to blue when...