Home > Toshiba > Projector > Toshiba Projector Tlp 550 User Manual

Toshiba Projector Tlp 550 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Toshiba Projector Tlp 550 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							71
    Others
    CONTENTSControlling the projector by using RS-232C
    You can also control the projector by entering the command from a computer via RS-232C.
    CONTROL RS-232C
    Command list
    RS-232C
    9600 bps, No parity, Data length: 8 bits,
    Stop bit: 1 bit
     STX (02h)   Command (3Byte)   ETX (03h)
    One command only can be used per
    communication.
    Commands shall be composed of
    alphanumeric characters of ASCII description.
    Use only capital letters.
    Acknowledge  ACK (06h)
    Not Acknowledge  NAK (15h) Communication
    method
    Communication
    format
    Data format
    Return value 1
    2
    3
    4
    Signal assignment of RS-232CInterface format
    Description
    Receiving data
    Consent to send
    Data set ready
    Signal ground
    Request to send
    No connection
    Sending data
    No connection
    Signal
    RXD
    CTS
    DSR
    GND
    RTS
    N.C
    TXD
    N.C
    Pin No.
    1
    2
    3
    4
    5
    6
    7
    8
    Notes
    •When commands are transmitted serially, wait for the reply of the projector (acknowledge or not acknowledge) before sending the next command.
    •Adjustment commands include “ARG” (increase adjustment value) and “ALF” (decrease adjustment value). For usable items (marked Yes), send after the
    selection command.
    •The Yes marks in the input source columns indicate that that command can be used.
    78 6 34
    5 12
    Continued
    ClassificationItems/StatusSelection AdjustmentAnalog RGBVideo S-Video Y/PB/PRCameraCommand Command
    Power On PON - Yes Yes Yes Yes Yes
    Off (with confirmation message) POF - Yes Yes Yes Yes Yes
    Shut Down (without confirmation message)PSD - Yes Yes Yes Yes Yes
    Normal (RS-232C Condition Display Off) DOF - Yes Yes Yes Yes Yes
    Picture Contrast VCN Yes Yes Yes Yes Yes Yes
    Brightness VBR Yes Yes Yes Yes Yes Yes
    Sharpness VSH Yes - Yes Yes Yes Yes
    Camera gain Increase CGU - - - - - Yes
    Decrease CGD - - - - - Yes
    Picture mode Bright MVB - Yes - - - -
    True color MVP - Yes - - - - 
    						
    							72
    Others
    CONTENTS
    Continued
    Controlling the projector by using RS-232C (continued)
    ClassificationItems/StatusSelection AdjustmentAnalog RGBVideo S-Video Y/PB/PRCameraCommand Command
    Picture Video mode Auto. KV0 - - Yes Yes - -
    (Continued)NTSC KV1 - - Yes Yes - -
    PAL KV2 - - Yes Yes - -
    SECAM KV3 - - Yes Yes - -
    PAL-N KV4 - - Yes Yes - -
    PAL-M KV5 - - Yes Yes - -
    PAL60 KV6 - - Yes Yes - -
    NTSC4.43 KV7 - - Yes Yes - -
    Signal format Auto. SG0 - - - - Yes -
    480i (525i) SG1 - - - - Yes -
    480p (525p) SG2 - - - - Yes -
    575i (625i) SG3 - - - - Yes -
    720p (750p) SG4 - - - - Yes -
    1080i (1125i) SG5 - - - - Yes -
    Shutter Auto. CSA - - - - - Yes
    50Hz CS0 - - - - - Yes
    60Hz CS1 - - - - - Yes
    Screen size Full MSF - Yes Yes Yes Yes Yes
    Thru MST - Yes Yes Yes Yes Yes
    Wide MSW - - Yes Yes Yes -
    Picture reset DRV - Yes Yes Yes Yes Yes
    Position H-position PHP Yes Yes - - - -
    V-position PVP Yes Yes - - - -
    Phase PPH Yes Yes - - - -
    Frequency PCK Yes Yes - - - -
    Position reset DRP - Yes - - - -
    Color Color VCL Yes - Yes Yes Yes -
    Tint VTN Yes - Yes Yes - -
    R-level VLR Yes Yes Yes Yes Yes Yes
    G-level VLG Yes Yes Yes Yes Yes Yes
    B-level VLB Yes Yes Yes Yes Yes Yes
    Color reset DRC - Yes Yes Yes Yes Yes
    *2*2*1
    *1
    *1 Not possible for TLP551. *2 Not possible for PAL/SECAM. 
    						
    							73
    Others
    CONTENTSControlling the projector by using RS-232C (continued)
    Continued
    ClassificationItems/StatusSelection AdjustmentAnalog RGBVideo S-Video Y/PB/PRCameraCommand Command
    Audio Volume Increase VLU - Yes Yes Yes Yes -
    Decrease VLD - Yes Yes Yes Yes -
    Speaker output On AS1 - Yes Yes Yes Yes -
    Off AS0 - Yes Yes Yes Yes -
    Channel select L+R AMA - Yes Yes Yes Yes -
    L AML - Yes Yes Yes Yes -
    R AMR - Yes Yes Yes Yes -
    Loudness Off LM0 - Yes Yes Yes Yes -
    On LM1 - Yes Yes Yes Yes -
    Audio reset DRA - Yes Yes Yes Yes -
    Display Keystone PKV Yes Yes Yes Yes Yes Yes
    Keystone reset DRK - Yes Yes Yes Yes Yes
    Language English LEN - Yes Yes Yes Yes Yes
    French LFR - Yes Yes Yes Yes Yes
    German LGR - Yes Yes Yes Yes Yes
    Italian LIT - Yes Yes Yes Yes Yes
    Spanish LSP - Yes Yes Yes Yes Yes
    Portuguese LPO - Yes Yes Yes Yes Yes
    Japanese LJP - Yes Yes Yes Yes Yes
    Chinese(Simplified)LPK - Yes Yes Yes Yes Yes
    Chinese(Traditional)LKT - Yes Yes Yes Yes Yes
    Korean LKK - Yes Yes Yes Yes Yes
    Icon On MO0 - Yes Yes Yes Yes Yes
    Off MO1 - Yes Yes Yes Yes Yes
    Menu position Upper left MP1 - Yes Yes Yes Yes Yes
    Bottom left MP2 - Yes Yes Yes Yes Yes
    Upper right MP3 - Yes Yes Yes Yes Yes
    Bottom right MP4 - Yes Yes Yes Yes Yes
    Menu translucent On MB1 - Yes Yes Yes Yes Yes
    Off MB0 - Yes Yes Yes Yes Yes
    Display reset (except keystone) DRD-Ye s Ye s Ye s Ye s Ye s 
    						
    							74
    Others
    CONTENTS
    Continued
    Controlling the projector by using RS-232C (continued)
    ClassificationItems/StatusSelection AdjustmentAnalog RGBVideo S-Video Y/PB/PRCameraCommand Command
    Default settingCOMPUTER On I10 - Yes Yes Yes Yes Yes
    Off I11 - Yes Yes Yes Yes Yes
    Analog RGBIS0 - Yes Yes Yes Yes Yes
    Y/P
    B/PRIS1 - Yes Yes Yes Yes Yes
    VIDEO On I30 - Yes Yes Yes Yes Yes
    Off I31 - Yes Yes Yes Yes Yes
    S-VIDEO On I40 - Yes Yes Yes Yes Yes
    Off I41 - Yes Yes Yes Yes Yes
    CAMERA On I60 - Yes Yes Yes Yes Yes
    Off I61 - Yes Yes Yes Yes Yes
    Projection mode Standard PJ0 - Yes Yes Yes Yes Yes
    Rear PJ1 - Yes Yes Yes Yes Yes
    Ceiling PJ2 - Yes Yes Yes Yes Yes
    Rear ceiling PJ3 - Yes Yes Yes Yes Yes
    No signal background Logo BG0 - Yes Yes Yes Yes Yes
    Blue backgroundBG1 - Yes Yes Yes Yes Yes
    Non BG2 - Yes Yes Yes Yes Yes
    No signal power off Off PN0 - Yes Yes Yes Yes Yes
    5 min. PN1 - Yes Yes Yes Yes Yes
    Power on Manual AP0 - Yes Yes Yes Yes Yes
    Auto. AP1 - Yes Yes Yes Yes Yes
    Startup screen On MS0 - Yes Yes Yes Yes Yes
    Off MS1 - Yes Yes Yes Yes Yes
    Default setting initialize DRI - Yes Yes Yes Yes Yes
    ResetReset all DRS-Ye s Ye s Ye s Ye s Ye s
    Status display (CALL) DON - Yes Yes Yes Yes Yes
    Input Toggle IN0 - Yes Yes Yes Yes Yes
      selection COMPUTER IN1 - Yes Yes Yes Yes Yes
    VIDEO IN3 - Yes Yes Yes Yes Yes
    S-VIDEO IN4 - Yes Yes Yes Yes Yes
    CAMERA IN6 - Yes Yes Yes Yes Yes
    Input source setting 
    						
    							75
    Others
    CONTENTS
    Continued
    Controlling the projector by using RS-232C (continued)
    ClassificationItems/StatusSelection AdjustmentAnalog RGBVideo S-Video Y/PB/PRCameraCommand Command
    RESIZE Increase the enlargement ratio RUP - Yes Yes Yes Yes Yes
    Decrease the enlargement ratio (Minimum: reset status)RDW - Yes Yes Yes Yes Yes
    Move the enlargement sectionUp PO1 - Yes Yes Yes Yes Yes
    Down PO2 - Yes Yes Yes Yes Yes
    Left PO3 - Yes Yes Yes Yes Yes
    Right PO4 - Yes Yes Yes Yes Yes
    Enlargement reset RS0 - Yes Yes Yes Yes Yes
    FREEZE On FON - Yes Yes Yes Yes Yes
    Off FOF - Yes Yes Yes Yes Yes
    MUTE On MON - Yes Yes Yes Yes Yes
    Off MOF - Yes Yes Yes Yes Yes
    PIP On PIN - Yes - - - -
    Off PIF - Yes - - - -
    PIP input source Video PI0 - Yes - - - -
    S-Video PI1 - Yes - - - -
    PIP size Small PS0 - Yes - - - -
    Middle PS1 - Yes - - - -
    Large PS2 - Yes - - - -
    PIP position Upper left PP0 - Yes - - - -
    Upper right PP1 - Yes - - - -
    Lower left PP2 - Yes - - - -
    Lower right PP3 - Yes - - - -
    PIP reset DRW - Yes - - - -
    AUTO SET PAT - Yes - - - -
    Camera Shortcut CDR - Yes Yes Yes Yes Yes
    Auto. W/B On CW1 - - - - - Yes
    Off CW0 - - - - - Yes
    Lighting On CL1 - - - - - Yes
    Off CL0 - - - - - Yes 
    						
    							76
    Others
    CONTENTSSpecifications
    Main unit
    Power consumption TLP550/TLP250: 240W (Standby: 15W)
    TLP551/TLP251: 250W (Standby: 15W)
    Mass TLP550/TLP250: 3.7kg
    TLP551/TLP251: 4.3kg
    Dimensions TLP550/TLP250: 260 x 95.5 x 295 (mm)
    (Except the protrusion parts)(W/H/D)
    TLP551/TLP251: 260 x 95.5 x 352 (mm)
    (W/H/D)
    Cabinet Material PC+ABS resin and ABS resin
    Ambient environment Temperature : 0 deg. to 35 deg.
    Humidity : 30% to 70% RH
    Lamp High pressure mercury lamp
    Projection screen size 30 to 180 inches
    Projection distance 0.70 to 3.63m
    Speaker 1W (monaural)
    Connectors
    • COMPUTER Mini D-sub 15-pin
    Analog RGB/Y/P
    B/PR (combination)
    • S-VIDEO Mini DIN 4-pin
    • VIDEO 1V(p-p), 75Ω, RCA pin jack
    • AUDIO 1.3V(rms), more than 22kΩ,
    ø3.5mm stereo mini jack
    • CONTROL Mini DIN 8-pin (RS-232C)
    • USB Type B
    Continued
    Liquid crystal display
    Projection system 3-panel transmission
    Panel size 0.7  inches
    Driving system TFT active matrix
    Picture elements
    TLP550/TLP551: 786,432 pixels (1024 x 768 dots) (H./V.) x 3
    TLP250/TLP251: 480,000 pixels (800 x 600 dots) (H./V.) x 3
    Projection lens
    Lens Zooming lens
    F=2.0 to 2.4   f=14.5 to 17.4mm
    Focusing Manual operation
    Zooming Manual operation
    Document imaging camera (with camera model)
    Lens F = 2.8, f = 3.4mm
    Focusing Manual operation
    Zoom None (adjusted by distance to subject)
    Iris Auto./Manual
    Image element 1/3 inch CCD
    Effective pixels for pickup section
    805,486 pixels (1034 x 779 dots) (H./V.)
    Lighting LED light (class 2) 
    						
    							77
    Others
    CONTENTS
    Sold separately
    Replacement lamp TLPL55
    •The design and specifications are subject to change without
    notice.
    Trademarks
    NEC, PC-98 series are trademarks of NEC Corporation.
    VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of International Business Machines Corporation.
    Macintosh is a registered trademark of Apple Computer, Inc.
    Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
    Display Data Channel is a trademark of Video Electronics Standard Association.
    Specifications (continued) 
    						
    All Toshiba manuals Comments (0)

    Related Manuals for Toshiba Projector Tlp 550 User Manual