Toshiba Projector Tlp 550 User Manual

							41
Operations
CONTENTSOperating the presentation mode (continued)
Adjust the projector before presentation if
necessary.
In the presentation mode after step 5, the projector cannot be
adjusted.
4
MENU
ON /INPUT
ENTER
CT-90106
KEYSTONE AUTO SET
EXIT /
P.MODE
PIP FREEZE
MUTE
CALLRESIZE
VOL / ADJ
STANDBY
3
6
5,7
3
P.MODE
KEYSTONE
AUTOSET
EXIT
ON / STANDBY
VOL / ADJ
ENTER
MENU
INPUT
FANTEMPLAMPON
Remote control
Control panel
(Main unit side)
3
5
Press P.MODE and hold for two seconds.
The projector enters into the presentation mode.
The icon 
 appears in the presentation mode.
Select the computer input with INPUT.
You can change the order of procedure 1 to 3.
INPUT
INPUT
P.MODE
Change a slide with the selection buttons ( / ).
: Advancing to the next slide.
: Returning to the previous slide.
•The selection buttons of the main unit can not be used.
•The slide can not be switched even if you press and hold the
selection buttons continuously.
(The function is different from the ,  keys of the computer.)
6
7
When the presentation is finished;
To exit the presentation mode, press P.MODE.
The projector returns to the normal mode.
P.MODE 
						

							42CONTENTS
Adjustments &
Settings
Operating the menu screen
Continued
FULLItemNextQuit
Adjust the image brightness.
Select the image with its brightness priority or quality (color)priority.Correct the keystone distortion of the screen.Select the input source when changing the input.
Adjust the image flicker.
EXITENTERMENU
GUIDE MENUAnalog RGB
Items
Button operation guideThe current input source
MENU
ENTER
CT-90106EXIT /
P.MODE
VOL / ADJ
End
Press MENU.Then GUIDE MENU appears.  (Then FULL MENU 
appears if the latest operation had been finished with the 
FULL MENU and afterwards power is not turned off.)
When you make more 
detailed adjustments 
and settings, call the 
FULL MENU.
Return to the GUIDE MENU when 
the MENU button is pressed.
Press MENU button once again.
The FULL MENU of [Picture] appears.
FULL MENU has seven pages of [Picture], [Position], [Color], [Audio], 
[Display], [Default setting] and [Reset].
Use the selection button (        ) to change the page of FULL MENU.
/
[Picture][Position][Color]
[Default setting][Reset][Display][Audio]
Select the item with the selection 
button (         ). 
/
Press ENTER to confirm.
The item selected can be adjusted or set.
Press EXIT and return.
When you select other items, press EXIT repeatedly 
until GUIDE MENU appears.
When you want to quit, press EXIT repeatedly until 
GUIDE MENU disappears.
StartFULL MENU: For the operating instruction, refer to the next page.  GUIDE MENU: You can adjust or set the functions used frequently.
Adjust and set it with the button indicated 
on the button operation guide.
According to the selected item, the kind ([adjustment],[setting] 
or [execution]) and the button to be used are indicated on the 
button operation guide.
Control panel (Main unit side)Remote control
KEYSTONE
AUTOSETEXIT
ON / STANDBY
VOL / ADJ
ENTERMENU
INPUT
FANTEMPLAMPON
Selection
VOL/ADJSelection
MENUENTEREXIT
VOL/ADJ MENU
ENTER
EXIT
MENU MENUMENU
MENU
ENTER ENTER
EXIT EXIT
43
Various adjustments and settings can be made on the menu screen. The basic operations on the menu screen are shown here.
Note
The item displayed on the menu with gray is not available. 
						

							43CONTENTS
Adjustments &
Settings
Operating the menu screen (continued)
Analog RGB
GUIDEItemExecuteQuit
Picture
Contrast-12-
-12-
Bright
FullFull
Thru Brightness
Picture mode
Screen size
Reset
EXITENTERMENUPageAdjust
Kind (page) of 
FULL MENU
Items
Button operation guide The current input source
Adjustment
display bar
Choices
End
Select the item with selection buttons (          ).
State of a figure below is a sample for explanation. 
This state does not in fact./
Press ENTER.
The Item selected is executed.  FULL 
MENU is displayed after execution.
Press ENTER.
An object can be selected from the 
sub menu list.
Start
Select it with the button indicated 
on the button operation guide.
For the selection method of FULL MENU, refer to 
the previous page.
Press ENTER.Only the (small list of the) selected 
adjusting items is displayed.
This is useful as you can see a main 
picture not hidden under FULL MENU.
Adjust with VOL/ADJ (+/-) or 
selection buttons (         ).
/
Press EXIT.
FULL MENU is displayed and you can 
select other items.
Press EXIT.
FULL MENU disappears, and 
adjustment or setting is finished.
Method -1
Method -2Adjust with VOL/ADJ (+/-)
Press the selection button (         ) 
when selecting other items continuously./
MENU
ENTER
CT-90106EXIT /
P.MODE
VOL / ADJ
Control panel (Main unit side)Remote control
KEYSTONE
AUTOSETEXIT
ON / STANDBY
VOL / ADJ
ENTERMENU
INPUT
FANTEMPLAMPON
Selection
VOL/ADJSelection
MENUENTEREXITVOL/ADJ MENU
ENTER
EXIT
ENTER ENTER
ENTER ENTER
ENTER ENTER
EXIT EXIT
EXIT
EXIT
At the items whose [Execute] is 
displayed on the operation guide;
At the items whose the
adjustment bar is displayed;
At the items whose the 
choices are displayed;
42
Notes
• The item displayed on the menu with gray is not available.
• An exclusive menu is displayed when making PIP function sub-picture settings. 
52 
						

							44CONTENTS
Adjustments &
Settings
GUIDE MENU adjustments and settings
Adjust the contrast of the picture.
Adjust the brightness of the picture.
Adjust the flicker of the picture. (Sampling clock phase adjustment)
The picture is set with its brightness priority.
The picture is set with its color quality priority.
Adjust the keystone distortion. Adjust the color depth of the picture.
Adjust the document imaging cameras gain.
Select a shutter speed below to decrease the flickering of the document imaging cameras picture.
The shutter speed is set automatically.
The shutter speed is fixed to 50 Hz.
The shutter speed is fixed to 60 Hz.
: COMPUTER connector is selectable with the INPUT button.
: Video input is selectable with the INPUT button. : Use COMPUTER 
connector as Analog RGB input.
: Use COMPUTER 
connector as Y/PB/PR input.
: S-Video input is selectable with the INPUT button.
: Camera input is selectable with the INPUT button.
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
-
-
- Ye s
Ye s-
-
-
- Ye s
Ye s-
-
-
- Ye s
Ye s-
Ye s
Ye s
- Ye s
- -
Ye s-
- Ye s
- Ye s
Y/PB/PRVideo
The relationship between input source and item      Yes: Adjustable   -: Not displayed
S-Video CameraAnalog RGB
Adjust the image brightness.Contrast
Brightness
ADJ.
ADJ.
Adjust the image flicker.PhaseADJ.
Select the image with its brightness 
priority or quality (color) priority.BrightSET
True colorSET
Correct the keystone distortion 
of the screen.KeystoneADJ.
VIDEOSET
Select the input source when 
changing the input.SETCOMPUTER
SETAnalog RGB
SETY/PB/PR
S-VIDEOSET
CAMERASET
Adjust the image color.ColorADJ.
Camera gainADJ.
Shutter
SETAuto
SET50Hz
SET60Hz
: On/Off with ENTER
: On/Off with (   ) or (   )
Adjust the gain of the document imaging camera.
Reduce the flicker.
On GUIDE MENU, you can set or adjust the functions frequently used.
To operate GUIDE MENU, refer to page 
42.
Notes
•The items related to the camera (the document imaging camera) are displayed only with models having a camera.
•“Sampling phase” is adjusted and memorized for each RGB signal 
69.
•“Keystone” and “Input source setting” can be adjusted (set) at all input sources, but the adjustments (settings) made at one input source are applied to all
input sources.
•It is impossible to exit from the menu if no input source is selected.
•If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.
•The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized. 
						

							45CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Picture
Adjust the contrast of the picture.
Adjust the brightness of the picture.
Adjust the sharpness of the picture. (In Y/PB/PR input mode, sharpness is a setting item.)
The picture is set with its brightness priority.
The picture is set with its color quality priority. Adjust the document imaging cameras gain.
The video mode (color system) is set automatically.
The video mode is fixed to NTSC system.
The video mode is fixed to
 PAL system.
The video mode is fixed to SECAM system.
The video mode is fixed to PAL-N system.
The video mode is fixed to PAL-M system.
The video mode is fixed to PAL60 system.
The video mode is fixed to NTSC4.43 system.
The Y/P
B/PR signal format is set automatically.
The Y/P
B/PR signal format is fixed to 480i (525i) mode.
The Y/P
B/PR signal format is fixed to 480p (525p) mode.
The Y/P
B/PR signal format is fixed to 575i (625i) mode.
The Y/P
B/PR signal format is fixed to 720p (750p) mode.
The Y/P
B/PR signal format is fixed to 1080i (1125i) mode.
The shutter speed is set automatically.
The 
shutter speed is fixed at 50 Hz.
The shutter speed is fixed at 60 Hz.
The picture is displayed with the input source resolution.
The picture is converted to wide screen format.
Return the adjustments and settings of FULL MENU [Picture] to the factory default values.
-
- Ye s
Ye s
Ye s
Ye s Ye s- Ye s
--
- Ye s
Ye s
-
Ye s Ye s- Ye s
Ye s-
- Ye s
Ye s
-
Ye s Ye s- Ye s
Ye s-
- Ye s
Ye s
Ye s
-
Ye s Ye s- Ye s
-
- Ye s
Ye s
-
Ye sYe s Ye s Ye sTLP251: Yes
TLP551:  -    Ye s- -
- Ye s
Y/PB/PRVideo
The relationship between input source and item      Yes: Adjustable   -: Not displayed
S-Video CameraAnalog RGB
Contrast
BrightnessADJ.
ADJ.
SharpnessADJ.
Picture modeBrightSET
True colorSET
Camera gainADJ.
Reset EXEC.
Video modeAuto.SET
NTSCSET
PA LSET
SECAMSET
PAL-NSET
PAL-MSET
PAL60SET
NTSC4.43SET
Signal formatAuto.SET
480i (525i)SET
480p (525p)SET
575i (625i)SET
720p (750p)SET
1080i (1125i)SET
ShutterAuto.SET
50HzSET
60HzSET
Screen sizeFullTLP550/551: The picture is converted to XGA (1024 x 768 dot) resolution.
TLP250/251: The picture is converted to SVGA (800 x 600 dot) resolution.SET
ThruSET
WideSET
You can make various adjustments or settings of the picture from FULL MENU [Picture].
To operate FULL MENU, refer to page 
43.
Notes
• The items related to the camera (the document imaging camera) are displayed only with models having a camera.
• A part of function is restricted if you set the “Video mode” or “Signal format” to the modes other than [Auto.] . 
50
¥The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized. 
						

							46CONTENTS
Adjustments &
Settings
FULL MENU adjustments - Position
Adjust the horizontal display position of the picture.
Adjust the vertical display position of the picture.
Adjust the flicker of the picture. (Sampling clock phase adjustment)
Adjust the sampling frequency of the input signal if vertical stripes appear in the detailed image.
Return the adjustments of FULL MENU [Position] to the factory default values.
-
-
-
-
--
-
-
-
--
-
-
-
--
-
-
-
- Ye s
Ye s
Ye s
Ye s
Ye s
Y/PB/PRVideo
The relationship between input source and item      Yes: Adjustable   -: Not displayed
S-Video CameraAnalog RGB
H-position
V-positionADJ.
ADJ.
PhaseADJ.
FrequencyADJ.
ResetEXEC.
You can adjust the picture position etc. of the analog RGB input from FULL MENU [Position].
To operate FULL MENU, refer to page 
43.
Notes
•This menu is not displayed except with analog RGB input.
•The adjustment of each item in this menu is memorized for each RGB signal input 
69.
•The adjustments made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged
or if a power failure occurs while the projector is on, the adjustments are not memorized. 
						

							47CONTENTS
Adjustments &
Settings
FULL MENU adjustments - Color
Adjust the color depth of the picture.
Adjust the tint of the picture. (Not adjustable at PAL, SECAM, PAL-N,PAL-M and PAL60)
Adjust the red level of the picture.
Adjust the green level of the picture.
Adjust the blue level of the picture.
Return the adjustments of FULL MENU [Color] to the factory default value.Ye s
Ye s
Ye s
Ye s- -
Ye s
Ye s
Ye s
Ye s- Ye s
Ye s
Ye s
Ye s
Ye s Ye s Ye s
Ye s
Ye s
Ye s
Ye sYe s Ye s
Ye s
Ye s
Ye s
Ye s- -
Y/PB/PRVideo
The relationship between input source and item      Yes: Adjustable   -: Not displayed
S-Video CameraAnalog RGB
Color
TintADJ.
ADJ.
R-levelADJ.
G-levelADJ.
B-levelADJ.
ResetEXEC.
You can adjust the color condition of the picture from FULL MENU [Color].
To operate FULL MENU, refer to page 
43.
Note
The adjustments made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments are not memorized. 
						

							48CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Audio
Adjust the sound volume emitted from the speaker.
The sound is emitted from the speaker.
No sound is emitted from the speaker.
Return the adjustments and settings of FULL MENU [Audio] to the factory default values.
The loudness effect is added to the speaker sound.
The loudness effect is not added to the speaker sound.
The sound of the left and right channels is mixed and emitted from the speaker.
Only the sound of the left input channel is emitted from the speaker.
Only the sound of the right channel is emitted from the speaker.
Ye s (common)
Ye s (common)
Ye s (common)
Ye s (common)
Ye s Ye s Ye s Ye s
- - -
- -
Y/PB/PRVideo
The relationship between input source and item      Yes: Adjustable   -: Not displayed
S-Video CameraAnalog RGB
VolumeADJ.
Speaker outputOnSET
OffSET
ResetEXEC.
LoudnessOnSET
OffSET
Channel selectL+RSET
LSET
RSET
You can set the sound emitted from the speaker from FULL MENU [Audio].
To operate FULL MENU, refer to page 
43.
Notes
•When the camera input is selected, sound is not emitted.
•Each item can be set at every input source except the camera input, but the settings made at one input source are applied to all input sources as shown
in the table. The sound volume can be adjusted for each input source except the camera input.
•The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized. 
						

							49CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Display
Adjust the keystone distortion caused by changing the installation angle.
Menus and messages are displayed in English.
Menus and messages are displayed in French.
Menus and messages are displayed in 
Portuguese.
Menus and messages are displayed in Japanese.
Menus and messages are displayed in German.
Menus and messages are displayed in Italian.
Menus and messages are displayed in 
Spanish.
Menus and messages are displayed in Chinese (Simplified).
Menus and messages are displayed in Chinese (Traditional).
Menus and messages are displayed in Korean.
The icon is displayed.
The icon is not displayed.
The menu background becomes translucent.
The menu background is normal. The menu is displayed at the upper left of the screen.
The menu is displayed at the upper right of the screen.
The menu is displayed at the lower left of the screen.
The menu is displayed at the lower right of the screen.
Return the adjustments and settings of FULL MENU [Display] to the factory default values.
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Y/PB/PRVideo
The relationship between input source and item      Yes: Adjustable   -: Not displayed
S-Video CameraAnalog RGB
KeystoneADJ.
LanguageEnglishSET
FrançaisSET
IconOn
Off
ResetEXEC.
PortuguêsSET
SET
DeutschSET
ItalianoSET
EspañolSET
SET
SET
SET
SET
SET
Menu translucentOn
Off
SET
SET
Menu positionUpper left
Upper right
SET
SET
Lower leftSET
Lower rightSET
You can set the language, menu display, etc. from FULL MENU [Display].
To operate FULL MENU, refer to page 
43.
Notes
•Each item can be set at all input sources, but the settings made at one input source are applied to all input sources.
•The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
•The setting of “Menu translucent” is not available if no signal is input. Also, the background of the menu will not be translucent, regardless of the settings. 
						

							50CONTENTS
Adjustments &
Settings
FULL MENU settings - Default setting
Return the settings of FULL MENU [Default setting] to the factory default values.
The projector is set to the floor-mounted front projection mode.
The projector is set to the floor-mounted rear projection mode.
The projector is set to the ceiling-mounted front projection mode.
The projector is set to the ceiling-mounted rear projection mode.
The TOSHIBA logo is displayed when no signal is input.
The entire screen is set to blue when no signal is input.
Nothing is displayed when no signal is input.
The power does not turn off automatically even if no signal status continues.
The power turns off automatically when no signal status continues for approx. 5 min.
: COMPUTER connector is selectable with the INPUT button.
: Video input is selectable with the INPUT button.
: Use COMPUTER connector as Analog RGB input.
: Use COMPUTER connector as Y/PB/PR input.
: S-Video input is selectable with the INPUT button.
: Camera input is selectable with the INPUT button.
The power turns on by pressing the ON/STANDBY button.
When the power plug is inserted, the power is on.
The start-up display appears when the power is turned on.
The start-up display does not appear when the power is turned on.
VIDEOSET
Input source settingSET COMPUTER
SETAnalog RGB
SETY/PB/PR
S-VIDEOSET
CAMERASET
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Ye s (common for all of the inputs)
Y/PB/PRVideo
The relationship between input source and item      Yes: Adjustable   -: Not displayed
S-Video CameraAnalog RGB
ResetEXEC.
Projection modeStandardSET
RearSET
CeilingSET
Rear ceilingSET
BackgroundLogoSET
BlueSET
NoneSET
No signal power offOffSET
5 min.SET
Power onManualSET
Auto.SET
Start-up screenOnSET
OffSET
: On/Off with ENTER: On/Off with (   ) or (   )
You can set the Input source, projection mode, etc. from FULL MENU [Default setting].
To operate FULL MENU, refer to page 
43.
Notes
• It is impossible to exit from the menu if no input source is selected.
• If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.
• In the following conditions, the function to detect no signal (“No signal background”, “No signal power off”) does not activate:
1) When “Video mode” 
45 is set to the modes other than [Auto] and Video input or S-Video input is selected.
2) When “Signal format” 
45 is set to the modes other than [Auto] and Y/PB/PR input is selected.
•Note that the projector automatically powers up at the restoration of power after a failure, if “Power on” is set to [Auto] with the power plug inserted.
•Even if “Power on” is set to [Auto], the setting of [5 min.] of “No signal power off” is effective.
•Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources.
•The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if
a power failure occurs while the projector is on, the settings are not memorized.