Toshiba Projector Tdp P3 Us User Manual
Have a look at the manual Toshiba Projector Tdp P3 Us User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
37 APPENDIX Specifications The TDP-P3 must be operated and stored within the temperature and humidity ranges specified. Te m p e r a t u r e Operating 50 to 104 ° F (10 to 40° C) Non-operating -4 to 158 ° F (-20 to 70° C) Humidity Operating and non-oper. 5% to 95% relative humidity, non-condensing Dimensions 8.75 x 9.75 x 2.5 inches (22.2 x 24.8 x 6.4 cm) We i g h t 4.8 lbs. (2.2 kg) unpacked Altitude Operating 0 to 10,000 feet (3,048 meters) Non-operating 0 to 40,000 feet (12,192 meters) Optics Focus Range 4.9 - 16 feet (1.5-5 m) Lamp Type 120-watt VHP lamp Input Power Requirements 100-120VAC 6A;50/60Hz 200-240VAC 3A; 50Hz Audio Input Input Impedance 10K ohm nominal, AC coupled Maximum Input Voltage (L IN + RIN)PEAK < 4.5 V for THD ≤ 0.3% L IN or RIN < 2.0 Vrms for THD ≤ 0.3% Sensitivity 100 mV at 1 KHz for 88 dB SPL at 1 meter Connector Type 3.5 mm (1/8 inch) stereo phone mini
38 Appendix Accessories NOTE: Use only Toshiba- approved accessories. Other products have not been tested with the projector.Power Cords (one ships with projector, type depends on country) NOTE: You can purchase these items by contacting your dealer or visiting Toshiba’s website at projectors.toshiba.com.Standard Accessories (ship with the projector) Quick Start card User’s Guide Soft Case Shipping Box M1-DA Analog Computer Cable Composite Video Cable Computer Audio Cable 6 ft (1.8 m) Audio Adapter (RCA to 3.5mm) S-Video Cable Macintosh Adaptor Executive Plus Remote Projection Lamp Module Lens Cap North American Power Cord Australian Power Cord UK Power Cord European Power Cord Danish Power Cord Swiss Power Cord
39 NOTE: You can purchase these items by contacting your dealer or visiting Toshiba’s website at projectors.toshiba.com. Optional AccessoriesDeluxe Carry Case Shipping Case (ATA approved) Deluxe Travel Case M1-DA Digital Computer Cable Full-Feature Laser Pro Remote Control GyroMouse RF Remote (US, Mexico, Canada, UK only) IR Remote Receiver PC Guardian Projector Cable Lock 40” Portable Projection Screen 50” Portable Projection Screen 60” Portable Projection Screen Programming Cable
40 Appendix Portable Computer Activation Chart NOTE: Visit our website at projectors.toshiba.com for the most current activation chart. Many computers do not automatically turn on their external video port when a projector is connected. Activation commands for some computers are listed in the following table. (If your com- puter is not listed or the given command does not work, refer to the computer ’s documentation for the appropriate command.) On many computers, the activation function key is labeled with an icon, for example or the text CRT/LCD. NOTE: Usually, pressing the key commands once activates the external video port, pressing it again activates both the external and internal ports, and pressing it a third time activates the internal port. Refer to your computer’s documentation for details on your specific model. ComputerKey command to activate portKey command to de-activate port Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup) AST* ** FN-D or Ctrl-D FN-D or Ctrl-D Ctrl-FN-D Ctrl-FN-D FN-F5 FN-F5 type from A:/IVGA/CRT type from A:/IVGA/CRT FN-F12 FN-F12 AMS FN-F2 FN-F2 AMT setup screen setup screen AT & T F N - F 3 FN-F6FN-F3 FN-F6 Advanced Logic ResearchCtrl-Alt-V Ctrl-Alt-V Altima Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L setup VGA/ Conf.Simulscansetup VGA/ Conf.Simulscan Ambra** FN-F12 FN-F12 FN-F5 FN-F5 F2/Choose Option/F5 F2/Choose Option/F5 Amrel* ** setup menu setup menu Shift-Ctrl-D Shift-Ctrl-D Apple see Mac Portable and Mac PowerBook Aspen automatic automatic Award FN-F6 FN-F6 BCC* automatic reboot computer
41 Bondwell LCD or CRT options after bootupreboot for LCD or CRT options to appear Chaplet** setup screen setup screen FN-F6 FN-F6 FN-F4 FN-F4 Chembook FN-F6 FN-F6 Commax Ctrl-Alt-#6 Ctrl-Alt-#5 Compaq* ** Ctrl-Alt-< Ctrl-Alt-> FN-F4 FN-F4 automatic automatic mode/? (for setup option) mode/? (for setup option) Compuadd* ** automatic automatic Alt-F for screen setup optionAlt-F for screen setup option Data General Ctrl-Alt-Command Ctrl-Alt-Command Data General Wa l k a b o u t2 CRT/X at DOS prompt reboot Datavue Ctrl-Shift-M Ctrl-Shift-M DEC** FN-F5 FN-F5 FN-F4 FN-F4 Dell** Ctrl-Alt-< Ctrl-Alt-> Ctrl-Alt-F10 Ctrl-Alt-F10 FN-F8 (CRT/LCD) FN-F8 FN-D FN-D FN-F12 FN-F12 Digital* automatic reboot FN-F2 FN-F2 Dolch dip switch to CRT dip switch to LCD Epson dip switch to CRT dip switch to LCD Everex* setup screen option setup screen option For-A Ctrl-Alt-Shift-C Ctrl-Shift-Alt-L Fujitsu FN-F10 ComputerKey command to activate portKey command to de-activate port
42 Appendix Gateway FN-F3 FN-F1/FN-F1 again simul- taneousFN-F3 FN-F1 Grid* ** FN-F2, choose auto or simultaneousFN-F2 Ctrl-Alt-Tab Ctrl-Alt-Tab Hitachi FN-F7 FN-F7 Honeywell FN-F10 FN-F10 Hyundai setup screen option setup screen option IBM 970* automatic warm reboot IBM ThinkPad** reboot, enter setup menu FN-F2 FN-F7, select choice from setup menu FN-F1, select choice FN-F5, select choice PS/2 SC select choice (CRT, LCD, etc.) Infotel FN-F12 FN-F12 Kaypro boot up, monitor plugged inunplug monitor Kris Tech FN-F8 FN-F8 Leading Edge FN-T FN-T Mac Portable 100no video port: not compatible Mac PowerBook 140, 145, 150, 170no video port: requires a 3rd-party interface 160, 165, 180, 520, 540, 5300Control Panel folder, Pow- erBook Display folder; Activate Video Mirroringwarm reboot 210, 230, 250, 270, 280, 2300requires Apple Docking Station or Mini Dock Magitronic FN-F4 FN-F4 Mastersport FN-F2 FN-F1 ComputerKey command to activate portKey command to de-activate port
43 Micro Express* automatic warm reboot Micron FN-F2 FN-F2 Microslate* automatic warm reboot Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On NCR setup screen option setup screen option NEC* ** setup screen option setup screen option CRT at the DOS prompt LCD at the DOS prompt FN-F3 FN-F3 Olivetti* automatic automatic FN-O/* FN-O/* Packard Bell* ** FN-F0 FN-F0 Ctrl-Alt-< Ctrl-Alt-> Panasonic FN-F2 FN-F2 Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup Samsung* setup screen option setup screen option Sanyo setup screen option setup screen option Sharp dip switch to CRT dip switch to LCD Sun SPARC- DataviewCtrl-Shift-M Ctrl-Shift-M Tandy** Ctrl-Alt-Insert Ctrl-Alt-Insert setup screen option setup screen option Tangent FN-F5 FN-F5 Texas Instru- ments*setup screen option setup screen option Top-Link* ** setup screen option setup screen option FN-F6 FN-F6 Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home FN-End FN-Home FN-F5 FN-F5 setup screen option setup screen option Twinhead* FN-F7 FN-F7 FN-F5 FN-F5 Automatic Automatic WinBook Ctrl-Alt-F10 Ctrl-Alt-F10 ComputerKey command to activate portKey command to de-activate port
44 Appendix * These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached. ** These manufacturers offer more than one key command depend- ing on the computer model. Wyse software driven software driven Zenith** FN-F10 FN-F10 FN-F2 FN-F2 FN-F1 FN-F1 Zeos** Ctrl-Shift-D FN-F1Ctrl-Shift-D FN-F1 ComputerKey command to activate portKey command to de-activate port
45 Using Video Mirroring with a PowerBook Computer When you turn video mirroring (called SimulScan in newer Pow- erBooks—see below) on, the projector displays the same informa- tion that appears on your PowerBook’s built-in screen. When video mirroring is off, the projector acts like a separate display. To turn on video mirroring for the first time: 1Open the Monitors control panel; click on Monitor 2. 2Set the number of colors you want. 3Open the Control Strip, then click on the monitor icon. 4Select “Turn Video Mirroring On.” Now you can turn video mirroring on and off from the Control Strip without having to open the Monitors control panel again. When using video mirroring and high color graphics such as slide shows, the projected image occasionally might turn black and white. If this happens, perform the following steps: 1Turn off video mirroring. 2Open the Monitors control panel. 3Move the white menu bar to Monitor 2 to set the projector as the primary monitor. 4Restart the PowerBook. Using SimulScan Some newer PowerBooks display images on an external monitor or projector differently than previous ones. When using SimulScan, the projector displays the same information that appears on your PowerBook To select SimulScan: 1Open the Control Panel, then double-click Monitors and Sound. 2In the Resolution list, choose the SimulScan mode, then click OK. 3If this changes your display settings, a dialog box appears. Click OK to confirm the change.
46 Appendix Projected Image Size NOTE: Use the graph and tables to help you determine projected image sizes. F IGURE 24 Projected image size Ta b l e 1 : Image Size, Width and Height-maximum image size Distance to Screen (feet) Diagonal (feet)Width (feet)Height (feet) 4.9 3.2 2.6 1.9 85.24.23.1 12 7.8 6.3 4.7 16 10.4 8.3 6.3 20 13.0 10.4 7.8 30 19.5 15.6 11.7 Ta b l e 2 : Image Size, Width and Height-minimum image size Distance to Screen (feet) Diagonal (feet)Width (feet)Height (feet) 4.9 2.5 2.0 1.5 84.13.32.5 12 6.2 4.9 3.7 16 8.2 6.6 4.9 20 10.3 8.2 6.2 30 15.4 12.3 9.2