Toshiba Projector Tdp Mt500 User Manual
Here you can view all the pages of manual Toshiba Projector Tdp Mt500 User Manual. The Toshiba manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 VIEWING VIDEO IMAGES C. Making projection Preparations: •Remove the lens cap. •Turn on power for the connected video equipment. 1 Turn “ON” the main power switch (Turn to indication I). • When the main power switch is turned on, POWER indicator comes on in orange. •If the projector finished operation without sufficient cooling, the following operation of the main power button may not work during the time when the cooling fan is turning. (At this time POWER indicator blinks in orange.) After the fan...
Page 22
22 When stopping projection: 8 Press POWER () button. •A confirmation message appears on the screen. •To cancel this state, wait for a while, or press EXIT but- ton or MENU button of the remote controller, or press MENU/EXIT button of the projector. 9 Press POWER () button again. •The light-source lamp comes off and the projector comes to standby state. At this time POWER indicator blinks in orange. 10Wait about 2 minutes until POWER indicator comes on in orange. •Wait about 2 minutes in standby state,...
Page 23
23 VIEWING VIDEO IMAGES On setting ASPECT (Image angle) This projector can change ASPECT ratio (The ratio between width and length of image frame) according to input video signals. POWER ON/OFF C1 C2DVI D DVI A S VCOMP1 COMP2 DVI-D DVI-A VIDEO S-VIDEO 16:9 16:94:34:3 ZOOMZM REAL REALDY NDYNAMIC 12 3 ASPECT button SOURCE ASPECT Original video imageProjects video images on full screen (16: 9).Projects video images at a ratio of 4: 3.Projects video images of input signals as they are. Projects...
Page 24
24 VIWING COMPUTER IMAGES DVI RS-232C YCb/Pb Cr/Pr To monitor port To DVI terminal Mini D-SUB 15pin-DVI conversion cable2 1 To DVI terminal DVI cable2 To DVI terminal 1 DVI RS-232C Cb/Pb Cr/Pr A. Connecting this projector with a computer Preparations: •Make sure that the power for the projector and computer are turned off. •With a desk-top type computer, disconnect RGB cables connected to the monitor. In the case of analog connections: 1 Connect the attached mini D-SUB 15pin- DVI conversion cable to DVI...
Page 25
25 C. Making projection Preparations: •Remove the lens cap. •Turn on power for the connected video equipment. 1 Turn “ON” the main power switch (Turn to indication I). • When the main power switch is turned on, POWER indicator comes on in orange. •If the projector finished operation without sufficient cooling, the following operation of the main power button may not work during the time when the cooling fan is turning. (At this time POWER indicator blinks in orange.) After the fan has stopped turning,...
Page 26
26 When stopping projection: 8 Press POWER () button. •A confirmation message appears on the screen. •To cancel this state, wait for a while, or press EXIT but- ton or MENU button of the remote controller, or press MENU/EXIT button of the projector. 9 Press POWER () button again. •The light-source lamp comes off and the projector comes to standby state. At this time POWER indicator blinks in orange. 10Wait about 2 minutes until POWER indicator comes on in orange. •Wait about 2 minutes in standby state,...
Page 27
27 SETTING WITH MENUS Menu construction • The items with mark “ ” or “...“ requires to press ENTER button to confirm its entry after selecting the item. PICTURE... CONTRAST– 32 ~ +31 BRIGHTNESS– 30 ~ +30 ICC YELLOW ICC CONTROL COLOR– 30 ~ +30 TINT– 15 ~ +15 COLOR TEMP– 15 ~ +15 – 15 ~ +15 – 15 ~ +15 – 15 ~ +15 PRO-PICTURE... DISPLAY... SOURCE... ASPECT... SAVE... OPTION...RESET ALL AUTO OFF LAMP HOUR LANGUAGE...9300 / 6500 / 5700 / USER1 / USER2 CINEMA1/CINEMA2/VIDEO1/VIDEO2/STANDARD...
Page 28
28 SETTING WITH MENUS PRO-PICTURE... DISPLAY... OPTION... INSTALLATION...PICTURE... PRO-PICTURE... DISPLAY... OPTION... INSTALLATION...PICTURE... INSTALLATION... RGB & COMPONENT MIRROR KEYSTONE PATTERN LANGUAGE INTTALLATION... RGB & COMPONENT MIRROR KEYSTONE PATTERN LANGUAGE KEYSTONE INSTALLATION... KEYSTONE0 KEYSTONE INSTALLATION... KEYSTONE+4 How to make menu setting: The following figures describe how to set trapezoidal correction as an example: 1 Press MENU button. Main menu (the first level)...
Page 29
29 SETTING WITH MENUS Items that can be set with menus In this projector, the following items can be set by revealing setup menus. PICTURE MENU ITEM SETTING FUNCTION CONTRAST ------- -32 – +31 ---------- Adjusts contrast of projected images. (See Page 28.) BRIGHTNESS ---- -30 – +30 ---------- Adjusts brightness of projected images. (See Page 28.) COLOR ------------- -30 – +30 ---------- Adjusts color thickness of projected images. (See Page 28.) TINT --------------- -15 – +15 ---------- Adjusts tint of...
Page 30
30 */45--5*0/.&/6 ITEM SETTING FUNCTION LANGUAGE --------- -t