Toshiba Projector Tdp Mt500 User Manual

11
PREPARATION
Checking accessories
The following accessories are provided with this projector. Check to be sure that all the accessories are packed in
the package.)
Personal computer parts
Power supply parts Remote controller parts
Power cable Conversion adaptorRemote controller
 Video  parts
Size-AAA 
dry batteries (two)
RS-232C cable
D-SUB 9P
Mini DIN 8PDVI
Mini D-SUB 15P DVI-conversion cable
Mini D-SUB 15P
Others
• Lens cap (Attached to the main body)
• Soft carrying case
• Operation manual
• Regular...

12
PREPARATION
Name and function of operational parts of the projector
Focus ring: 
Adjusts focus.
LAMP indicator
TEMP (temperature) indicator Directional button:
Used to shift menu item and adjust values.
ENTER button:
Used to determine menu item.
MENU/EXIT button:
Displays menu when pressed.
Erases menu when pressed again.
POWER button / 
POWER indicator
18
25
25
Operation panel
Remote controller 
photo-sensor (Front)Angle adjusting 
button
Terminal panel
 Intake vent
11
Angle adjusting foot11
10
25...

13
PREPARATION
POWER ON/OFF
SOURCEC1
C2DVI
D
DVI
A S
VCOMP1 COMP2
DVI-D
DVI-A VIDEO S-VIDEO
ASPECT 16:9
16:94:34:3
ZOOMZM
REAL
REALDY NDYNAMIC
12
3
ENTER
EXIT MENU
CONTRASTBRIGHT COLOR TINT
COLOR
TEMP
GAMMASHARPNESS
LIGHTLIGHT
SH GAM
TEMTIN COL
BRI CNT
Directional button:Used to shift menu item and adjust values.
Picture quality adjusting button: 
(See below)
POWER button:
MENU button:Displays menu. 
Erases the menu when pressed again.
ENTER button:Used to determine menu item.
2218
2218
27
25
20
25
25...

14
Front of projector Rear of projector
30˚ 30˚30˚ 30˚
Operate the 
remote controller 
within a distance 
of 10 m from the 
projector, pointing 
the light beam at 
the remote control 
photo-sensor 
(front or rear) of 
the projector.
When operating the remote controller forwarding the 
light beam to projector screen, keep the distance from 
the remote controller to the projector via the screen 
within about 6m. The operable range of the remote 
controller, however, depends on the characteristics of 
the...

15
SETTING UP
Setting up screen
Set the screen perpendicular to the projector. If the screen can not be set perpendicularly, adjust the
projection angle of the projector. (See below.)
•Adjust the screen or projector so that the shadow of the projector lens may be projected onto the center of the
screen.
•Do not place the screen where the direct sunlight and illuminating lights come onto the screen. Direct light
illumination onto the screen could whiten the screen surface making the projected picture...

16
SETTING UP
Screen size Plojection distance (L)Height (A)
Type Height Width Min Max Tele Wide
50 62 111 181 217 23 21
60 75 133 218 260 27 26
70 87 155 254 303 32 30
80 100 177 290 347 36 34
90 112 199 326 390 41 39
100 125 221 363 433 45 43
110 137 244 399 477 50 47
120 149 266 435 520 54 52
130 162 288 471 563 59 56
140 174 310 508 607 64 60
150 187 332 544 650 68 64
180 224 399 653 780 82 77
(Unit : cm)
Screen size 
(Height)Screen size 
(Height)
Projection distance (L) Projection distance (L)
Screen...

17
SETTING UP
Screen sizeProjection distance (L)Height (A)
Type Height Width Min Max Tele Wide
50 76 102 167 199 21 20 57
60 91 122 200 239 25 24 69
70 107 142 233 279 29 28 80
80 122 163 266 318 33 32 91
90 137 183 300 358 37 35 103
100 152 203 333 398 42 39 114
110 168 224 366 438 46 43 126
120 183 244 400 477 50 47 137
130 198 264 433 517 54 51 149
140 213 284 466 557 58 55 160
150 229 305 500 597 62 59 171
180 274 366 600 716 75 71 206
Projection
height (H)
(Unit : cm)
Projection 
height...

18
VIEWING VIDEO IMAGES
A. Connecting the projector to video equipment
Preparations:
• Check to be sure that the power for the projector and video equipment is turned off.
1 Connect an end of a commer-
cially available video cable to
VIDEO terminal of the projector.
2 Connect the other end of the
video cable to the video output
terminal of the video equipment.
If S-video output terminal is provided with the video
equipment, make the connection as follows:
3 Connect an end of a commer-
cially available...

19
DVD player or BS digital 
tuner that has D-terminal
D-RCA conversion cable 
(Commercially available)To audio output 
terminal
To D-terminalTo audio input 
terminal
COMPONENT1DVI
COMPONENT2
S-VIDEOVIDEO
RS-232C Y Cb/Pb Cr/Pr
To COMPONENT 
(1 or 2) terminals
Video equipment that 
has DVI-D terminal
DVI cable (commercially available)
To DVI-D terminal
To DVI-D terminalTo DVI terminal
To DVI-D terminal
COMPONENT1DVI
COMPONENT2
S-VIDEOVIDEO
RS-232C Y Cb/Pb Cr/Pr
Connecting DVD players or BS digital tuners...

20
VIEWING VIDEO IMAGES
Plug the attached 
power cable as it is.
2
Power cable
1
Earthing terminal
Power cablePower plug
12
43
Conversion adaptor U-shaped metal
B. Plugging power cord
In the case of power outlets provided with an earthing terminal inlet:
1 Plug the attached power cable into
the power cable inlet of this projec-
tor.
2 Plug the other end of the power cable
into a power outlet.
 In the case of power outlets provided with no earthing terminal inlet:
1 Plug the attached power cable into
the...