Toshiba Projector Tdp Et20 User Manual

41
Operations
You can call up on-screen menus, and conduct a number of adjustments and settings using the 
operation buttons 
p.18 p.19 on the control panel (main unit side) and remote control.
■ How to use the menus
The menu shown below is for operation instructions purposes and might differ from the 
actual display.
1. Press the [MENU] button. Display the menu.
2. Select a category.
3. Adjustment & Settings
Press  to enter the selected category. Select item with   / [UP] [DOWN] key and 
press  again....

42
■ Input MENU
Video input source and audio input source can be selected separately in this projector.
Video input
Video input source can be selected in this menu from DVD, Component, HDMI, Video, 
S-video and Computer.
Press 
. Select with   / [UP] [DOWN] key.
Audio input
Audio input source can be selected in this menu from DVD, HDMI, Digital (Coax) and Ana-
log. Audio input source links to the video input source and it is memorized.
For example, after analog is selected for audio input when video...

43
Operations
Sharpness
Adjust the sharpness of the image.
Press 
. Adjust with  / [ - ] (Softer) or  / [ + ] (Sharper) key.
Detail enhancement
Set the function to enhance detail of the image. 
Press 
. Adjust with  / [ - ] (Lower) or  / [ + ] (Higher) key.
H-position
Adjust horizontal position of the image. 
Press 
. Adjust with  / [ - ] (Move left) or  / [ + ] (Move right) key.
This can be adjusted when input source is Computer.
V- position
Adjust vertical position of the image. 
Press 
. Adjust with...

44
Advanced MENU
Overscan
Adjust overscan ratio of the image.
Press 
. Adjust with  / [ - ] (Lower) or  / [ + ] (Higher) key.
No overscan when set to 100%
NTSC mode
Set the black level for Video/S-video input.
Press 
. Select US(7.5IRE)/Japan(0IRE) with   / [UP] [DOWN] key.
This can be adjusted only when video input source is Video/S-video and input signal is 
NTSC or NTSC4.43. 
 
HDMI mode
Set the black/white level for HDMI input.
Press 
. Select HDMI/DVI with   / [UP] [DOWN] key.
This can be adjusted...

45
Operations
■ Audio setting MENU
Volume
Adjust the volume of sound.
Press 
. Adjust with  / [ - ] (Lower) or  / [ + ] (Higher) key.
Bass
Adjust the bass level of sound.
Press 
. Adjust with  / [ - ] (Lower) or  / [ + ] (Higher) key.
Tr e b l e
Adjust the treble level of sound.
Press 
. Adjust with  / [ - ] (Lower) or  / [ + ] (Higher) key.
Surround
Set the surround mode of speaker output.
Press 
. Select from Stereo/Dolby/Concert Hall/Stadium with   / [UP] [DOWN] key.
•  When Dolby is selected,...

46
■ Setup MENU
Language
Select a language used in menu system. The following ten languages are available.
- English
- French (Français)
- Germany (Deutsch)
- Italian (Italiano)
- Spanish (Español)
- Portuguese (Português)
- Japanese (
ãÄ.†)
- Simplifi ed Chinese (
1T
[)
- Traditional Chinese (

47
Operations
Setting fan mode to high increases the cooling fan speed. Set this option to use the pro-
jector at high altitude (over 1800 meter / 6000 feet above sea level)
Press 
. Select from Standard/High with   / [UP] [DOWN] key.
Projection mode
Sets projection mode in accordance with placement style.
p.22
The following four modes are available.
- Standard
- Ceiling (TDP-ET10 only)
- Rear
- Rear ceiling (TDP-ET10 only)
Press 
. Select with   / [UP] [DOWN] key.
Keypad light
Set keypad light on or...

48
■ Notes•  If a lamp is used for extended periods, images will appear dark, and the lamp could burn 
out. This is characteristic of a lamp, and is not malfunction. (The lifetime may vary much 
due to conditions of use.)
To t a l  t i m e
Display the total time that this projector is used.
Version
Display fi rmware version.
This shows the version of the projector’s internal control program. This version is referred 
to for customer service, etc.
Using menus (Continued) 

49
Maintenance
The product’s light source is a mercury lamp that lights at increased internal pressure. Be 
sure to fully understand the following characteristics of the lamp and handle it with ex-
treme care.
•  The lamp may burst with a loud noise due to impact or deterioration, or fail to light at the 
expiration of its life.
•  How long it takes before the lamp burst or the life expires may vary greatly by lamp.
  Some may burst shortly after fi rst use.
•  Burst is likely to happen if the lamp is...

50
 CAUTION•  If you have been using the projector, the lamp will be very hot, and may cause burn 
injuries.
Wait for the lamp to cool (for longer than 1 hour) before replacing it.
•  If the lamp should break, please handle with care to avoid injury due to broken pieces 
and contact your dealer for repair service.
1 Unplug power cord.
2 Wait until lamp is suffi ciently cooled.
Wait for at least 1 hour.
3 Keep the projector stationary.
Do not move the projector while replacing the 
lamp. 
4 Remove the lamp...