Toshiba Projector Tdp Et20 User Manual

31
Operations
TDP-ET20 DVD playback
About   
The    icons on the heading bar show the playable discs for the function 
described under that heading.
  You can use this function with DVD video discs.
  You can use this function with Video CDs.
   You can use this function with Audio CDs and CD-R /RW discs.
Setup the DVD player.
You can setup the DVD player setting.
(1)  Press [DVD SETUP] key on the remote control when DVD input is selected.
DVD setup menu will appear.
(2)  In DVD setup menu, there are 2...

32
PA R E N TA L
DVD discs equipped with the password function are rated according to their content. The 
contents allowed by a parental lock level and the way a DVD disc can be controlled may 
vary from disc to disc.
■ NotesDVD video discs may or may not respond to parental lock settings. This is not a defect in 
the DVD player. Make sure this function works with your DVD video discs.
Before changing the rating, it is required to enter password for unlocking. Please see the 
PAS SWO R D heading. 
p.31...

33
Operations
PBC setting 
This DVD supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the 
abbreviation of Playback Control.) You can enjoy two playback variations depending on 
types of discs.
•  Video CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD in the same way as an audio CD.
•  Video CD equipped with PBC function (Version 2.0)
In addition to operation of a Video CD not equipped with the PBC function, you can enjoy 
playback of...

34
MENU LANGUAGE 
DVD menu language can be selected in this menu.
(1)  Select MENU LANG in LANGUAGE SETUP page and press 
 or  key.
(2) Press 
  key to select DVD menu language and press  key.
■ NotesSome DVD video discs may not include your pre-selected language. In this case, the DVD 
video player automatically displays disc menus consistent with the disc’s initial language 
setting.
Playing a disc.
1. Basic playback 
  
(1)  Turn on the power and select DVD input.
(2)  The DVD startup screen will...

35
Operations
■ NotesStrong static electricity may affect the DVD player’s operation and cause it not to work 
properly. If this happens, please try followings.
(1) Press 
 /  key for about 5 seconds. DVD player will eject the disc.
(2)  If DVD player still don’t work, turn OFF the POWER, disconnect and then reconnect 
the AC power cord, and turn ON the projector again.
To start playback in the stop mode:
Press 
 /  or 
To pause playback (still mode):
Press  /  or  during playback.
To resume normal...

36
2. Playing in fast reverse or fast forward directions   
Press  or  during playback.
 (REW) :  Fast reverse playback (2X-20X)
 (FF) :  Fast forward playback (2X-20X)
Each time you press 
 or  , the playback speed changes.
To resume normal playback, press 
 /  or .
■ Notes•  The projector mutes sound and subtitles during reverse and forward scan of DVD 
video discs (except playing x2 forward). However, the projector plays sound during fast 
forward(x2) or fast reverse(x2) play of audio CDs.
•  The...

37
Operations
5. Repeat playback   
Repeat playback allows you to repeat Chapter/Title/All (DVD) or Track/All (CD/ VCD).
Press [REPEAT] on the remote control during playback or stop mode.
Repeat mode will change repeatedly as following.
 DVD:  Chapter 

 Title 

 All 

 Off
CD/VCD: Track 

 All 

 Off
DivX
®/MP3: One 

 Folder 

 All 

 Off
•  If you press 
 /  or , the Repeat function ends and playback stops.
•  Some discs may not permit the repeat operation.
•  Repeat does not work with an interactive...

38
•  Depending on the DVD, the title menu may be displayed automatically when the disc is 
loaded.
•  Depending on the DVD, a chapter menu may be displayed after you select a title.
9. Changing soundtrack language  
You can select the language when you play a multilingual disc.
(1)  Press [AUDIO] on the remote control during playback.
The current soundtrack language will appear.
(2)  Press [AUDIO] on the remote control repeated until the desired language is selected.
•  The selected soundtrack language...

39
Operations
• Press [DISPLAY] again
•  Press [DISPLAY] again to erase this OSD.
(2)  When CD/VCD is playing.
•  Press [DISPLAY] again to erase this OSD.
12. Multimedia fi les on DVD/CD playback  
(1)  Load a disc on which Multimedia fi les have been recorded in the disc slot.
(2)  A fi le menu screen will appear on the screen.
 Press   to change folder window, fi le window, or fi le type buttons.
To change fi le types to play, press until fi le type display button is highlighted. And 
select following one fi...

40
•  CD fi le system: ISO9660 Level1, 2, or Joliet.
•  This internal DVD video player requires discs/recordings meet certain technical standards 
in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set 
to these standards. There are many different types of recordable disc formats (includ-
ing CD-R containing MP3/DivX
® fi les). Because this area of technology is still evolving, 
Toshiba cannot guarantee that all recordable discs will produce optimal playback quality. 
The...