Toshiba L350 Manual

41Getting Started
Setting up your computer
Your computer contains a rechargeable main battery that needs to 
be charged before you can use it.
To use external power or to charge  the battery you must attach the 
AC adaptor. See  “Connecting to a power source” on page 43 . 
Please handle your computer carefully to avoid scratching or 
damaging the surface.
Setting up your software
When you turn on the computer for the first time, do not turn off the 
power again until the operating system has loaded...

42Getting Started
Registering your computer with Toshiba
Registering your computer with Toshiba
Product registration is strongly recommended, and allows Toshiba 
to send you periodic updates, announcements, and special offers 
applicable to your product. Product registration can be completed 
during the initial start up process of your computer. If you decide 
not to register at that time,  you can either double-click the  To s h i b a  
Registration  icon on your desktop or go to the Toshiba Web site...

43Getting Started
Connecting to a power source
Connecting to a power source
Your computer requires power to operate. Use the power cord/cable 
and AC adaptor to connect the comput er to a live electrical outlet, 
or to charge the computer’s battery. 
Never pull on a power cord/cable to remove a plug from a socket. Always 
grasp the plug directly. Failure to follow this instruction may damage the 
cord/cable, and/or result in a fire or electric shock, possibly resulting in 
serious injury.
Always confirm...

44Getting Started
Connecting to a power source
To connect AC power to the computer:
1Connect the power cord/cable to the AC adaptor.
(Sample Illustration) Connecting the power cord/cable to the AC 
adaptor
Handling the cord on this product will expose you to lead, a 
chemical known to the State of California to cause birth defects or 
other reproductive harm.  Wash hands after handling .
2 Plug the AC adaptor co rd into the DC-IN on the side of the 
computer.
(Sample Illustration) Connecting the AC...

45Getting Started
Charging the main battery
The computer’s main battery light gives you an indication of 
the main battery’s current charge:
❖Glows amber while the main battery is being charged 
(AC adaptor connected)
❖ Glows green  when the main battery is fully charged
❖ Is unlit when the main battery has discharged, the battery 
is not charging, or the AC adaptor is not plugged into the 
computer or AC outlet
❖ Flashes amber when the main battery charge is low and it 
is time to recharge the main...

46Getting Started
Using the computer for the first time
Battery life and charge time may vary depending on the applications, 
power management settings, and features used.
Using the computer for the first time
The computer is now ready for you to turn it on and begin using it.
Opening the display panel
1Facing the front of the com puter, locate the center of the 
display panel.
2 Slide the display latch to the right.
3 Gently raise the panel.
4 Adjust the display to a comfortable viewing angle.
 (Sample...

47Getting Started
Using the computer for the first time
Small bright dots may appear on your screen display when you turn 
on your computer. Your display contains an extremely large number 
of thin-film transistors (TFT) and is manufactured using high-
precision technology. Any small bright dots that may appear on 
your display are an intrinsic characteristic of the TFT 
manufacturing technology. Over a period of time, and depending on 
the usage of the computer, the br ightness of the screen will...

48Getting Started
Adding memory (optional)
3Press and release the  power button. The on/off light glows 
green. 
(Sample Illustration) Turning on the power The preinstalled operating syst em will load automatically.
When you turn on the computer for the first time, do not turn off the 
power again until the operating system has loaded completely.
Adding memory (optional)
HINT: To purchase additional memory modules, see the accessories 
information packaged with your system or visit...

49Getting Started
Adding memory (optional)
Installing a memory module
Memory modules can be installed in the memory module slots on 
the base of the computer. You will need a small Phillips screwdriver 
for this procedure.
If the computer has been running recently, the memory module may 
be hot. The surrounding area may also be hot. Allow the module to 
cool to room temperature before replacing it. Avoid touching the 
cover, the module, and the surrounding area before they have cooled. 
Failure to...

50Getting Started
Adding memory (optional)
If the computer is on, begin at step 1; otherwise, skip to step  3.
1 Click  Start, and then  click the arrow next to the lock button in 
the lower-right corner of the Start menu.
The Shut Down menu appears.
 (Sample Image) Shut Down menu
2 Click  Shut Down .
The operating system turns off the computer.
3 Unplug and remove any cables  connected to the computer, 
including the AC adaptor.
4 Remove the main battery. For information on removing the 
main battery,...