Toshiba Hl 833 G Manual

							41
English
Enjoy Music through USB Port
The MP3 Player allows you to playback music files from a USB storage device.
Audio CodecFile ExtensionBit RateRemark
MPEG1 Layer2MP332Kbps~ 448Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate)
MPEG1 Layer3MP332Kbps ~ 320Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate)
Play Music Files
Insert a USB storage device and  press  on the remote.
Use ▲ or ▼ to select MEDIA and press .
TV
      1
      2
      3C
HDMI1
HDMI2
MEDIA
PC
Inputs
Press ◄ or ► to select MUSIC and press  to enter the submenu.
USB 2.0
PHOTO MUSICMOVIE
MOVESelectOKEXITEXIT
Press ▲ or ▼ to select the folder you wish to play and press  to enter.
Press P  or P  to page up or down.
MOVESelectOK
USB:\
Return
Music
Photo
Video
PageP
1  1
Music
EXITEXIT
Press ▲ or ▼ to select the desired music and press  to play.
USB:\MusicReturn
Up Folder
001.MP3
002.wma
003.aviReturn
1  1
MOVESelectOKPagePEXITEXIT
When listening music, press ◄ or ► to:
• /: Play or pause the selected music
• : Rewind the selected music
• : Fast forward the selected music
• : Go to the previous music
• : Go to the next music
• : Stop play
• : Select the desired repeat interval:
- Repeat Off- Repeat One: Repeat the selected music once - Repeat Floder: Repeat all music files in the selected folder
• : Show play list
• : Music information
  and press  to confirm the setting.  
						

							42
EnglishRepeat Settings
Press ◄ or ► to select .
Press  to select Off, One or Folder.
Using the Play List
Press ◄ or ► to select  and press .
Press ▲ or ▼ to select music and press  to play music.Press EXIT on the remote to collapse the list.
00001 / 00003
001.MP300:00:02 / 00:02:42
16
Off
Play List
001.MP3
002.wma
003.avi001.MP3
1 / 1
MOVESelectOKPagePEXITEXIT
Music Info
Info display file status information (content number, music title, Bit Rate, Artist, Sampling, Year, and size).
Press ◄ or ► to select  and press .
00001 / 00003
001.MP3 00:00:02 / 00:02:42
16
Off
Info
001.MP3
Album:
Title:
Bit Rate:
Artist:
Sampling:
Year:
Size: Music
01
320K
Singer 44K
2010
6366 KBytes
MOVESelectOKEXITEXIT
The information will be removed by time-out (about 15 sec) or press  to exit.  
						

							43
English
Enjoy Videos through USB Port
The Video Viewer allows you to playback video files from a USB storage device.
File ExtensionContainerVideo CodecSPECBit Rate(Mbit/sec)ProfileRemark
dat, mpg, mpegMPG,
MPEGMpeg1,21080P@ 30fps20Main Profile
MP4: GMC is not sup-ported
ts, trp, tp, m2tsMPEG2 -TS H264-TSMPEG2 ,H.2641080P@ 30fps20H264: Main Profile and High Profile @Level 4.0MPEG2: MP@HL
vobMPEG2 -PSMPEG21080P@ 30fps20MPEG2: MP@HL
mp4AVI, MP4
MPEG4 Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03,
Xvid 1.10-beta1/2 H.264
1080P@ 30fps20
H264: Main Profile and High Profile @Level 4.0
MPEG4: Simple Profile and Advanced Simple Profile @Level 5
mkvMKVH.264, MPEG1,2,41080P@ 30fps20
H264: Main Profile and High Profile @ Level 4.0MPEG4: Simple Profile and Advanced Simple Profile @Level 5
aviAVI(1.0, 2.0),  DMF0,1,2
MPEG2, MPEG4 Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03,
Xvid 1.10-beta1/2 H.264
1080P@ 30fps20
MPEG2: MP@HL
MPEG4: Simple Profile and Advanced Simple Profile @Level 5
Motion JPEGAV IJPEG640x480 @ 30fps10  
						

							44
EnglishPress MENU to change the settings when viewing a video.
MOVESelectOK
00001 / 00001
002.wmv00:00:08 / 00:02:28
16
Off
Pause
PlayEXITEXIT
Press ◄ or ► to:
• /: Play or pause the selected video
• : Fast back the selected video
• : Fast forward the selected video
• : Go to the previous video
• : Go to the next video
• : Stop play
• : Select the desired repeat interval:
- Repeat Off- Repeat One: Repeat the selected video once - Repeat Folder: Repeat all video files in the selected folder
• : Repeat from A to B
-  Set A: A-Set             Repeat and Start- Set B: B-Set             Repeat and repeat from             A to B
• : Show play list
• : Video information
• : Slow forward the selected video
• : Step forward the selected video
• : Allows you to input a search time  
  and press  to confirm the setting
Play Video Files
Insert a USB storage device and  press  on the remote.
Use ▲ or ▼ to select MEDIA and press .
TV
      1
      2
      3C
HDMI1
HDMI2
MEDIA
PC
Input
s
Press ◄ or ► to select MOVIE and press  to enter the submenu.
USB 2.0
PHOTOM USICMOVIE
MOVESelectOKEXITEXIT
Press ▲ or ▼ to select the folder you wish to view and press  to enter.
Press P  or P  to page up or down.
USB:\
Return
Music
Photo
Video
Video
1  1
MOVESelectOKPagePBackRETURN
Press ▲ or ▼ to select the desired video and press  to play.  
						

							45
English
Video Info
Info display file status information (content number, video title, audio track, subtitle, pro-gram, size, etc.).
Press MENU to change the settings when playing a video.
Press ◄ or ► to   and press .
00001 / 00001
27.avi00:00:08 / 00:02:28
16
Off
Info.
27.avi
Resolution:
AudioTrack:
Subtitle:
Program:
Size: 720 x 576
1 / 1
 / 0 / 0
9172 KBytes
Close
MOVESelectEXITEXIT
The information will be removed by time-out (about 15 sec) or press  to exit.
Goto Time
The feature allows you to view a selected time during the video. 
Press MENU to change the settings when playing a video.
Press ◄ or ► to select  and press 
Use the number key pad on the remote to enter time.
00001 / 00001
002.wmv 00:00:08 / 00:02:28
16
Off
Goto Time
Input search time:
0     0     :     0     0     :     0      0
OK
MOVESelectOKEXITEXIT
Repeat Settings
Press MENU to change the settings when playing a video.
Press ◄ or ► to select  and press  to select Off, One or Folder.
Set 
Press MENU to change the settings when playing a video.
Press ◄ or ► to select  and press  to select Set A, Set B or None.
Slow Forward
The feature changes forward speeds.  
Press MENU to change the settings when playing a video.
Press ◄ or ► to select  and press  to select SF2X, SF4X, SF8X, SF16X or Play.
Step Forward
The feature allows you to view a video one frame at a time. 
Press MENU to change the settings when playing a video.
Press ◄ or ► to select  and press  to play step by step.
Using the Play List
Press MENU to change the settings when playing a video.
Press ◄ or ► to select  and press 
Press ▲ or ▼ to select a video and press  to play the video.Press EXIT on the remote to collapse the list.
MoveSelectOK
00001 / 00001
27.avi 00:00:08 / 00:02:28
16
Off
Playlist
1 / 1
27.avi
PagePEXITEXIT  
						

							46
English
Equipment Control
The HDMI-LINK mode on the television’s remote control allows the control of connected HDMI-LINK equipment being watched.
To control the HDMI-LINK input source, first select the equipment with HDMI-LINK input source selection, then switch the mode on the remote control to HDMI-LINK and press any buttons.
The available functions are dependent on the equipment connected. Not all the remote con-trol keys may be available. Please refer to the operation manual for each piece of equipment connected.
NOTE: The television features that can be con-trolled by the connected equipment are: Standby, Volume and Sound Mute.
HDMI-LINK Controls
This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba HDMI-LINK compatible equipment from the television’s remote control.
Note: Not all Toshiba products currently support HDMI-LINK.
Input Source Selection
When any equipment using CEC technology is connected, the HDMI-LINK icon will appear in the input source list allowing selection of individual devices.
Press . A list will appear on screen showing modes and all stored external equipment.
TV
      1
      2
      3C
HDMI1
HDMI2
MEDIA
PC
Inputs  
						

							47
English
One Touch Play
The function of HDMI-LINK will automatically power on the television that was in standby mode and switch the television’s input source to the port connected with the audio/video equipment by powering-on or playing from the audio/video equipment.
NOTE: This feature is dependent on the connected equipment and television setting.
System Standby
This feature automatically switches the con-nected equipment into standby when the television goes into standby and conversely for the television to switch into standby when connected equipment goes into standby. It is selected in the HDMI-LINK setup menu.
NOTE: This feature is dependent on the connected equipment and television setting.
System Audio Control
Using the Speaker Preference feature allows the televisions remote control to adjust the volume or mute the sound of the speakers con-nected to the television via an AV amplifier.
Ensure that the connected AV amplifier and HDMI-LINK equipment are selected in the input source selection and that the Speaker Preference is set to Audio Receiver in the HDMI-LINK setup menu.
NOTE: When the AV Amplifier is switched on, its input source changed or the volume adjusted, the sound will be output from the AV Amplifier’s speakers even if TV Speakers has been selected. Turn the television off then on again to output the sound from the TV’s speakers.
The full function may not work and is depend-ent on the Amplifier being used.
Enable HDMI-LINK
When the Enable HDMI-LINK is set to On, it allows the other functions to be enabled.
Press MENU. Press ◄ or ► to selectPREFERENCES and press  to enter  the submenu.
PICTURESOUNDSETUPAPPLICATIONSPREFERENCE S
Press ▲ or ▼ to select HDMI-LINK Set-up, and press  to enter the submenu.
EnterOKBackRETURN
PREFERENCESHDMILINK Setu p
Teletext
Panel Loc k
Auto Format
4:3 Stretch
Blue Screen
Side Panel  
Auto Off
On
Off
On 1OK
Press ▲ or ▼ to select Enable HDMI-LINK, and press ◄ or ► to select On or Off.
HDMI-LINK SetupEnable HDMILINK
Auto Power On
Auto Standby
Amplifier Control
Speaker Preferenc e On
On
On
On
TV Speakers
Edit BackRETURN
Auto Power On
The Auto Power On setting allows the televi-sion to be automatically switched On or Off if a HDMI-LINK device is turned On or Off.
In the HDMI-LINK Setup menu, press ▲ or ▼ to select Auto Power On.
Press ◄ or ► to select On or Off.
HDMI-LINK Menus
By activating the Enable HDMI-LINK feature in the HDMI-LINK setup menu, individual HDMI-LINK features can then be activated.  
						

							48
EnglishAuto Standby
When the Auto Standby is enabled, switching off the television will automatically switch off all connected HDMI-LINK equipment.
In the HDMI-LINK Setup menu, press ▲ or ▼ to select Auto Standby.
Press ◄ or ► to select On or Off.
Amplifier Control
In the HDMI-LINK Setup menu, press ▲ or ▼ to select Amplifier Control.
Press ◄ or ► to select On or Off.
Speaker Preference
This feature allows the audio output preference to be set to the TV speakers or AV amplifier speakers. The AV Amplifier option lets the televisions remote control adjust or mute the volume of the audio.
In the HDMI-LINK Setup menu, press ▲ or ▼ to select Speaker Preference when Amplifier Control is On.
Press ◄ or ► to select TV Speakers or Amplifier.
NOTE: This function is only available when the TV is connected to audio receivers that support CEC function.  
						

							49
English
Preference Controls
On Timer
This feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. When On timer is set to On, the green On Timer indicator on the front of the television is lit.
Press MENU. Press ◄ or ► to selectAPPLICATIONS and press  to enter  the submenu.
PICTURESOUNDSETUPAPPLICATIONSPREFERENCE S
Press ▲ or ▼ to select On timer and press  to enter the submenu.
EnterOKBackRETURN
APPLICATIONSEPG
On timer
Sleep Time r  
00:00OK
Press ▲ or ▼ to select Enable On Timer and press ◄ or ► to select On or Off.
On time rEnable On Time r
Enable DTV Cloc k
Power On Time
Repeat
Input
Channel
Volume
Time Until Power On On
On
00:00
ONCE ATV 0
30
00:00
Edit BackRETURN
NOTE: The settings are only available when Enable On Timer is On.
Press ▲ or ▼ to select Enable DTV Clock and press ◄ or ► to select On or Off.
NOTE: Power On Time and Repeat are only available when Enable DTV Clock is On.
Press ▲ or ▼ to select Power On Time and press ◄ or ► or use the number key pad on the remote to enter the time.
Press ▲ or ▼ to select Repeat and press ◄ or ► to select ONCE, DAILY, Mon.~Fri., Mon.~Sat. or Sat.~Sun.
Press ▲ or ▼ to select Input and press ◄ or ► to select AT V, EXT 1, EXT 2, EXT 3, HDMI 1, HDMI 2, PC or DTV.
For DTV, press ▲ or ▼ to select Chan-nel and press ◄ or ► to change the channel number.
For ATV, press ▲ or ▼ to select Chan-nel and press ◄ or ► to change the channel number or use the number key pad on the remote to enter the channel number.
NOTE: 
• Channel is only available when the Input is AT V or DTV.
• Blank screen will appear if not tuned.
Press ▲ or ▼ to select Volume and press ◄ or ► to modify the volume, or use the number key pad on the remote to enter the volume.
Press ▲ or ▼ to select Time Until Power On and press ◄ or ► or use the number key pad on the remote to enter the time for the TV to turn on automati-cally.
NOTE: Time Until Power On is only available when Enable DTV Clock is Off.
Sleep Timer
The television can be set to turn itself Off after a certain length of time.
Press MENU and press ◄ or ► to select APPLICATIONS.
Press ▲ or ▼ to select Sleep Timer (Turn off the TV).
Press ◄ or ► to modify the time the TV should turn off, or use the number key pad on the remote to enter the time.  
						

							50
EnglishEPG
EPG (Electronic Programme Guide) supports 9 sets of timers. You can set or cancel a timer for a selected programme within the guide. When the TV is on and the timer activates, a dialogue box is shown informing you that the programme is about to start. When the TV is in standby mode and the timer activates, the TV will wake up with backlight off, speaker mute on, and change to the channel selected.
You must set the time correctly before using this function. All set timers are cleared when performing a new channel scan.
Press GUIDE on the remote to display the Programme Guide.
Programme Guide4 Rossia K
09:0410:58
10:5911:02
11:0211:07
11:0712:29
12:3312:57
13:0013:03
13:0313:07
13:0713:17
13:1813:44Deejay Chiama Italia
Deejay Hit
s
The Club
Deejay Tg
Deejay News Beat
Deejay News Beat27 Aug 08:54:17   Fri, 27 Aug4
4
5
6
7
8
9
10
11Rossia K
Radio Rossi
a
NTV
Rossia 2
TRK 5 Kanal
Bibigon
Service Information. .
Service Information. .
SIT  5
BackRETURNMore InfoTimer ListTIMEROKMove
Press ▲ or ▼ to select the desired chan-nel and press  to enter the programme schedule.
Press ▲ or ▼ to select the desired pro-gramme and press  to enter the TIMER menu.
Programme Guide4 Rossia K
09:0410:58
10:5911:02
11:0211:07
11:0712:29
12:3312:57
13:0013:03
13:0313:07
13:0713:17
13:1813:44 Deejay Chiama Italia
Deejay Hit
s
The Club
Deejay Tg
Deejay News Beat
Deejay News Beat27 Aug 08:54:17   Fri, 27 Aug4
4
5
6
7
8
9
10
11Rossia K
Radio Rossi
a
NTV
Rossia 2
TRK 5 Kanal
Bibigon
Service Information. .
Service Information. .
SIT  5
BackRETURNSaveOKEdit
Programme Ti mers
4 Rossia K
Deejay Chiama Italia .
09:0410:58 27 Aug 2010
ONCE Off
Repeat
Subtitle
07:42:12   Fri, 27 Au
g
Press ▲ or ▼ to select Repeat or Subtitle and press ◄ or ► to adjust the settings as required. 
Press  to save the settings.
Press the  button on the remote to enter the Timer List menu.
Programme Timers
07:42:58   Fri, 27 Aug
BackRETURNEditOK
 
4
6
11 
Rossia K
Rossia 2
SIT 5
Channel
Date
Fri, 27 Au g
Fri, 27 Au g
Fri, 27 Au gTime
07:5207:58
08:0508:35
09:4511:55 Repeat
ONCE
ONCE
ONCE
Delete
Press ▲ or ▼ to select the desired pro-gramme and press  to edit.
NOTE: Press the  button on the remote to delete the timer.
Programme Ti mers
07:35:39   Fri, 27 Aug 
4
6
11 
Rossia K
Rossia 2
SIT 5
Channel
Date
Fri, 27 Au g
Fri, 27 Au g
Fri, 27 Au gTime
07:5207:58
08:0508:35
09:4511:55 Repeat
ONCE
ONCE
ONCE
BackRETURNSaveOKEdit
Programme Ti mers
801 Rossia  K
801 Rossia K
2010/08/27 08:05
08:35
ONCE Off
Channel
Date
Start Time
End Time
Repeat
Subtitle
Press ▲ or ▼ to select Channel, Date, Start Time, End Time, Repeat or Subtitle and press ◄ or ► to adjust the settings as required. 
Press  to save the settings.
NOTE: 
• When the timer is set, the Timer LED on the front panel lights on.
• After adjustment, the TV clock may not match the time in the EPG Programme Guide. The EPG Programme Guide time follows the broadcast stream time which can not be adjusted.