Toshiba Hl 833 G Manual

							11
English
HDMI-LINK Connections
The basic functions of connected audio/video equipment can be controlled\
 using the television’s remote control if a HDMI-LINK compatible device is connected.
The back of your television
AV amplifie r
HDMI outPlayback equipment
HDMI outHDMI in
Playback equipmentHDMI out
For  26/32EL83*G | 32/42HL83*G
The back of your television
AV amplifie r
HDMI outPlayback equipment
HDMI outHDMI in
Playback equipmentHDMI out
For  32AV83*G | 32/40LV83*G  
						

							12
EnglishConnecting an HDMI or DVI device to the HDMI input
The HDMI input on your television receives digital audio and uncompresse\
d digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-rial in digital form from EIA/CEA-861-D–compliant [1] consumer electr\
onic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal\
 formats, see page 18.
NOTE:• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard.• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) from the device to the HDMI terminal.For proper operation, it is recommended that you use an HDMI cable with \
the HDMI Logo  ().• If your HDMI connection is capable of 1080p and/or your television is ca\
pable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/D\
VI cable may not work properly with this mode.• HDMI cable transfers both video and audio. Separate analogue audio cable\
s are not required (see illustration).
HDMI
cable
HDMI devic
e
HDMI out(not supplied)
For  26/32EL83*G | 32/42HL83*G  
						

							13
English
HDMI
cable
HDMI devic
e
HDMI out(not supplied)
For  32AV83*G | 32/40LV83*G
To view the HDMI device video, press the  button to select HDMI 1 or HDMI 2 mode.  
						

							14
EnglishTo connect a DVI device
Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audio cables to the PC/HDMI1 (AUDIO) socket (see illustration).• The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m).• An HDMI-to-DVI adapter cable transfers video only.• Separate analogue audio cables are required for audio receivers.
DVI device
HDMI-to-DVI adapter cable
(not supplied)
Audio cable for HDMI 
to television connection 
(not supplied)
For  26/32EL83*G | 32/42HL83*G  
						

							15
English
DVI device
HDMI-to-DVI adapter cable
(not supplied)
Audio cable for HDMI 
to television connection 
(not supplied)
For  32AV83*G | 32/40LV83*G
To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:• When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.• When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology , it is possible that some devices may not operate properly with the television.HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.  
						

							16
EnglishConnecting a Computer
With either an RGB/PC or an HDMI connection, you can watch your computer\
’s display on the televi-sion and hear the sound from the televisions speakers.
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on the television, use an HDMI\
-to-DVI adapter cable and an analogue audio cable.If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate ana-logue cable is not necessary.
the back of your televisionHDMI-to-DVI 
adapter cable
(not supplied)
2
Computer
Audio cable for PC to television 
connection (not supplied)
For  26/32EL83*G | 32/42HL83*G  
						

							17
English
the back of your televisionHDMI-to-DVI 
adapter cable
(not supplied)
2
Computer
Audio cable for PC to television 
connection (not supplied)
For  32AV83*G | 32/40LV83*G
For acceptable PC and video signal formats, see page 18.
NOTE:• The edges of the images may be hidden.• If connecting a certain PC model with a unique PC signal, the PC signal \
may not be detected correctly.  
						

							18
English
Acceptable Video signals through HDMI terminals
ResolutionH. Frequency (KHz)V. Frequency (Hz)
480i15.73460.000
480p31.50060.000
576i15.62550.000
576p31.25050.000
720p37.50050.000
720p45.00060.000
1080i28.12550.000
1080i33.75060.000
1080p27.00024.000
1080p28.12525.000
1080p33.75030.000
1080p56.25050.000
1080p67.50060.000
Acceptable PC signals through HDMI terminals
ResolutionH (KHz)V(Hz)Pixel Clock (MHz)H-PolarityV-PolarityH-TotalV-Total
640 x 48031.36959.94025.175NegativeNegative800525
640 x 48037.86172.80931.500NegativeNegative832520
640 x 48037.50075.00031.500NegativeNegative840500
800 x 60035.16056.25036.000PositivePositive1024625
800 x 60037.87960.31740.000PositivePositive1056628
800 x 60048.07772.18850.000PositivePositive1040666
800 x 60046.87575.00049.500PositivePositive1056625
1024 x 76848.36360.00465.000NegativeNegative1344806
1024 x 76860.02375.02978.750PositivePositive1312800
1280 x 76847.77659.87079.500NegativePositive1664798
1360 x 76847.71260.01585.500PositivePositive1792795
1280 x 102463.98160.020108.000PositivePositive16881066
1280 x 102479.97675.025135.000PositivePositive16881066  
						

							19
English
Using the Controls
While all the necessary adjustments and controls for the television are \
made using the remote control, the buttons on the television may be used for some functions.
HDMI 2 INPUTSOCKET
Common Interface
USB
RED LED  Standby
GREEN LED  Power on
GREEN LED  On Timer
For  26/32EL83*G | 32/42HL83*G
HDMI 2 INPUT
SOCKET
Common Interface
USB
RED LED  Standby
GREEN LED  Power on
GREEN LED  On Timer
For  32AV83*G | 32/40LV83*G  
						

							20
EnglishSwitching On
If the RED LED is unlit check that the plug is connected to the power su\
pply. If the picture does not appear press  on the remote control, it may take a few moments.
To put the television into Standby press  on the remote control. To view the television press  again. The picture may take a few seconds to appear.
Using the Remote Control
To set up the television you will now need to use the on screen menus. Pr\
ess MENU on the remote control to see the menus.
The on-screen menu appears as a list of five topics. As each symbol is selected by pressing ▲ or ▼ on the navigation ring on the remote control, its respective options wil\
l appear right side.
To use the options, press  to enter the sub menu. Then press ▲ or ▼ on the navigation ring to move up and down through them and use  or to select the required choice. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual\
.
Using the Side-Key Controls
To change the volume, press .
To alter the channel, press  P .
Press MENU and ▲ or ▼, ◄ or ► to control the sound and picture options.
Press MENU to finish.
To select an external input, press  and then use ▲ or ▼ to move through the list until the appro-priate input source is selected.
Please always refer to the owner’s manual of the equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the sound from all speakers.