Toshiba Estudio 162 Owners Manual

e-STUDIO162/162D/151/151D CIRCUIT DIAGRAM  14 - 35
10
22 18 161
239 2
8
213
20
24 176
MCU
PWB
CN16
145
12
154
11
137
191
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
26 25 MDM_IRQ
PB_NAE0
PB_ADDR1
PB_ADDR6
PB_DATA1
PB_DATA5
PB_DATA7 PB_ADDR5
PB_DATA0
PB_DATA4 D-GND
PB_MOE
PB_NWE
D-GND
PB_ADDR0
PB_ADDR3
D-GND (/FAX_RST)
PB_NCS1
PB_ADDR2
PB_ADDR4
PB_ADDR7
D-GND
PB_DATA2
PB_DATA3
PB_DATA6CN37
5
D7 D-GND
17 EN5V
D-GND16 D1
D4
15
18 VCC3
19 14
D-GND D3
MSU_ST1 2
D0
VCC36
129 /RD
P-GND D23...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 1
[15] FIRMWARE DOWNLOAD 
PROCEDURES
[Preparation]
Write the download data (extension .dwl) into the main unit.
A USB port is required for the PC.
Create MaintenanceTool  flooder in the PC, and copy the following
files to the folder.
Necessary for program download
• Maintenance.exe (← Tool program)
 ProcModelB.mdl
 ProcModelC.mdl
 ProcModelE.fmt
 ProcModelE.ini
 ProcModelE.mdl
Driver
 Drivers/2kXP/Mainte.inf (For Windows XP/2000)
...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 2 4) PC side: Check that the Simulation Command List tree is dis-
played on the integration maintenance program.
5) PC side: When the integration maintenance program is boosted
and The copier is not turned on. is displayed at the bottom of dis-
play, select File 
→ Reconnect on the menu bar.
6) PC side: Check that trees are displayed in the Special (MCU/
IMC2/Facsimile) folder in the integration maintenance program. (If
trees are not displayed,...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 3 Note: When another machine is connected, connect the USB cable
again and select File 
→ Reconnect on the menu bar of the
integration maintenance program. Repeat the above procedures
from 5).
∗
∗∗ ∗Inhibition during download (Important)
If download is failed, the next download may not be executed. Use
great care not to execute the following items during download.
Never turn off the machine.
Never disconnect the download cable (USB cable).
*...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 4 7) PC side: Double-click Special (MCU/IMC2/Facsimile) in the main
tree items to develop its sub trees. Select Get Version in the sub
trees.
8) Check that the following display is shown.
With the above procedures, version acquisition is completed.
The display of **.** means its version is not downloaded. The
downloaded versions are displayed in a version number as shown in
“MCU Boot Version” and “MCU program Version”.
4. EEPROM data...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 5 7) PC side: Double-click Special (MCU/IMC2/Facsimile) to develop
its sub trees, and select Upload EEPROM Data Area in the sub
trees.
8) PC side: Enter a desired file name, and select Save.
9) PC side: When upload is completed, the complete message is dis-
played.
With the above procedure, the EEPROM data acquisition is completed.
Data acquired by the EEPROM data acquisition procedure are saved
in a file with extension of .eep.
5. Installing...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 6 5) Select the folder which includes the maintenance tool driver
(Mainte.inf) and press  button.
(Suppose that the driver is included in C:\MaintenanceTool\Drivers\
2kXp folder.)
6) Check the path to the folder which includes the maintenance tool
driver (Mainte.inf), and press  button.
7) When the following display is shown, press [Continue Anyway] but-
ton.8) When the following display is shown, installation is completed.
Press  button.
With...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 7 5) Select [Specify a location] and press  button.
6) Select [Include this location in the search;]. If the search location is
not the folder which includes the maintenance tool driver
(Mainte.inf), select . If the search location is the folder
which includes the maintenance tool driver, press  button to
go to procedure 9).
7) Specify the folder which includes the maintenance tool driver
(Mainte.inf), and press  button.8) Check that the path...

e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES  15 - 8 
1) Main unit side: Execute Test command No. 49-01 (Flash ROM pro-
gram write mode).
Check that DOWNLOAD MODE is displayed on the LCD of the
operation panel. (Press and hold [CA] key and [DOWN] key (left
key) together, and turn on the power simultaneously.)
2) Connect the machine and the PC with a USB cable.
3) The following display is shown on the PC side.
Select [Specify the location of the driver], and press  button.
4) Select [Specify a...

Memo
memo.fm  1 ページ  ２００４年１２月３日　金曜日　午前９時５０分