Toshiba Dkt2010h User Guide

Strata CTX DKT/IPT Telephone     11/0387
Centrex ApplicationA
Your system may be equipped with the Centrex Application, which enhances its 
feature capability when installed behind a Centrex or PBX system. Your telephone 
may have access to one or more of the enhanced Centrex features listed below:
Flexible Directory Numbering
A station’s extension can be three or four digits. It is, therefore, possible to match a 
station’s extension and Centrex line extension number. Dial the entire station number...

Centrex Application
Delayed Ringing
88Strata CTX DKT/IPT Telephone     11/03
Delayed Ringing
Outside line or Centrex line(s) can be programmed for a 12-second and/or 24-second 
ring delay at stations to permit alternate answering conditions. Answer the line when 
your telephone is ringing. 

Strata CTX DKT/IPT Telephone     11/0389
Button LabelsB
All Flexible Buttons must be programmed for your telephone in system programming 
and vary for individual telephones. If a button does not appear on your display or 
telephone keystrip label, see your CTX System Administrator for button assignments.
The button labels in Ta b l e  1 5 are for the Programmable Buttons on your telephone. 
Programmable buttons are the unmarked buttons on your keystrip.
Table 15 Feature Button Definitions...

Button Labels
Delayed Ringing
90Strata CTX DKT/IPT Telephone     11/03
&DOO)UZG
1R$QVZHUCall Forward-No Answer – Press to forward calls to another station or voice mail device 
when your station is not answered after 8~60 seconds (set at your station).
&DOO)UZG
([WHU QDOCall Forward-External – Press to forward Private or DID line calls to an external or 
internal telephone number.
Caller ID
Caller ID – Press to view the Call History list (may include name/number, date, status).
LUHFWHG
3LFNXSCall...

Button Labels
Delayed Ringing
Strata CTX DKT/IPT Telephone     11/0391
3ULYDF\
5HOHDVHPrivacy Release – Press to release privacy on common outside line buttons, enabling 
other station users to enter your conversations on those buttons. Privacy release does 
not apply to common extension buttons which are always private.
3URJUDP
Program – Press to enter User Programming mode, which enables you to re-define 
Flexible Buttons to perform other functions, including programming One Touch and 
Flexible...

Button Labels
Delayed Ringing
92Strata CTX DKT/IPT Telephone     11/03 

Strata CTX DKT/IPT Telephone     11/0393
IPT1020-SD SettingsC
This chapter explains how to enter data for your IPT1020-SD telephone if it was not 
previously entered by the telephone installer or if you need to change this information.
You may also need to ask your Telephone System Administrator for the information 
required for the following steps (IP address, subnet mask number, router address, 
Station ID, CTX Strata Net node number, IP address for the BIPU-M1A, etc.).
Notes
You may want to enter a...

IPT1020-SD Settings
FB Buttons
94Strata CTX DKT/IPT Telephone     11/03
FB Buttons
When you press ++ ++%	 (simultaneously) to enter telephone programming 
mode, you may need to press Feature Buttons (
). The following illustrations show 
you the location of these 
 buttons on 20, 10, and 14 button telephones. 
6929
MsgSpdial
RedialMic
SpkrCnf/TrnHoldFB01 FB02
FB03
FB04
FB05
FB06
FB07
FB08
FB09
FB10FB11
FB12
FB13
FB14
FB15
FB16
FB17
FB18
FB19
FB20
FB01
FB02
FB03
FB04
FB05
FB06
FB07
FB08
FB09
FB10...

IPT1020-SD Settings
FB Buttons
Strata CTX DKT/IPT Telephone     11/0395
5442
FB01 FB02 FB03 FB04 FB05 FB06 FB07FB08 FB09 FB10 FB11 FB12 FB13 FB14
FB buttons for 14-button phones
DKT3014-SDL
MsgSpdial
RedialMic
SpkrCnf/TrnHold
Vol
Z Q
Feature
Scroll Mode
Page 

IPT1020-SD Settings
Initializing the IPT1020-SD
96Strata CTX DKT/IPT Telephone     11/03
Initializing the IPT1020-SD
CAUTION!If you initialize the IP telephone, all settings return to default.
1. Press 
++ ++%	 (simultaneously).
2. Press 
  .
3. Press 
 to initialize the telephone’s function settings (LED On = initialize, 
LED Off = don’t initialize). See “IPT1020-SD Function Settings” on page 99 for 
details.
4. Press 
& to initialize LCD contrast setting (LED On = initialize, LED OFF =...