Toshiba D Vr7kc2 Owner Manual
Have a look at the manual Toshiba D Vr7kc2 Owner Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SELECTING TV AUDIO SE-R0297 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TIMER PROG. DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER INSTANT SKIP PLAY DVD VCR PAUSE REV SKIP STOPSKIP FWD 1.3x/0.8x PLAYTIME SLIP TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH ENTER SETUP 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2 Use [K / L] to select “Channel”, then press [ENTER]. “Channel” menu will appear. 3 Use [K / L] to select “TV Audio Select”, then press [ENTER]. 4 Use [K / L] to select “Stereo” or “SAP”, then press [ENTER]. General Setting Playback Display Video Recording Clock Channel DivX HDMI Reset All Auto Channel Preset Manual Channel Preset TV A di S l t TV Audio SelectStereo SAP Stereo: Outputs main-audio. SAP (secondary audio program): Outputs sub-audio. 5 Press [SETUP] to exit. Note on recording analog TV channel audio • When you record an analog TV program available in second audio or stereo, you have to select either “Stereo” or “SAP” in “Channel” menu beforehand. Refer to the following table to check an appropriate setting. Selected audio Broadcast audio Disc recording Audio output Stereo STEREO+SAP STEREO STEREO STEREO STEREO STEREO MONO+SAP MONO MONO MONO MONO MONO SAP STEREO+SAP SAP SAP STEREO STEREO STEREO MONO+SAP SAP SAP MONO MONO MONO You can select a sound channel to output from TV. When you record a TV program, only output sound channel will be recorded. Stereo has been selected as the default. &1($%@%73,$@&/@WJOEE
32 EN FORMATTING A DISC Choosing the Recording Format of a Brand-New DVD-RW When inserting a brand-new DVD-RW or DVD+RW, the unit automatically star\ ts to initialize the disc. DVD+RW will always be formatted in +VR mode, and DVD-RW will be formatted either vid\ eo or VR mode according to the recording format mode setting of the unit. Before insert a brand-new DVD-RW, you n\ eed to set the recording format to the desired mode. You can also manually format a DVD-RW once it has been use\ d. 1 Press [SETUP]. 2 Use [K / L] to select “DVD Menu”, then press [ENTER]. Setup Timer Programming Title List DVD Menu General Setting 3 Use [K / L] to select “Format”, then press [ENTER]. DVD Menu Format Finalize 4 Use [K / L] to select “Format Mode”, then press [ENTER]. DVD Menu Format Finalize Start Format Mode 5 Use [K / L] to select “Video mode” or “VR mode”, then press [ENTER]. 6 Press [SETUP] to exit. 7 Insert a brand-new disc. Formatting will start. Formatting 90% 8 Formatting is completed. “100%” is indicated. Note • The recording format setting is effective only for DVD-RW. You cannot change the recording format for a DVD-R and DVD+RW/+R. • You cannot mix two formats on one DVD-RW disc. If you insert a disc that has been formatted before, the recording format is not changed if you select another format in the “Setup” menu only. To reformat a disc (change disc format type), refer to “Reformatting a Disc Manually” on page 33. SE-R0297 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TIMER PROG. DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER INSTANT SKIP PLAY DVD VCR PAUSE REV SKIP STOPSKIP FWD 1.3x/0.8x PLAYTIME SLIP TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH ENTER SETUP &1($%@%73,$@&/@WJOEE
33EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others FORMATTING A DISC Reformatting a Disc Manually If you are using a DVD-RW or DVD+RW, you can format the disc by performi\ ng “Format”. You can format DVD-RW for either video mode recording or VR mode recording. DVD+RW can be format i\ n order to erase all content of the disc. Insert a recordable disc. 1 Press [SETUP]. 2 Use [K / L] to select “DVD Menu”, then press [ENTER]. Setup Timer Programming Title List DVD Menu General Setting 3 Use [K / L] to select “Format”, then press [ENTER]. e.g.) VR mode DVD-RW DVD Menu Format Finalize Disc Protect OFF ONDelete All Playlists 4 Use [K / L] to select “Start”, then press [ENTER]. DVD Menu Format Finalize Disc Protect OFF ONDelete All Playlists Start Format Mode Selection menu will appear and prompt you to confirm. • For DVD+RW, use [K / L] to select “Yes”, then press [ENTER]. 5 Use [K / L] to select “Yes”, then press [ENTER]. Formatting will start. If you want to cancel formatting, select “No”. Ye s NoYe sNo Are you sure? 6 Formatting is completed. “100%” is indicated. Formatting 100% Note • When you reformat the disc, the contents of the disc are erased. • For DVD-RW, make sure that the recording format is set to the desired mode. (See steps 1 to 6 in “Choosing the Recording Format of a Brand-New DVD-RW” on page 32.) • This unit may not be able to reformat a disc that is not previously formatted by this unit (e.g. DVD disc formatted by PC or another recorder). SE-R0297 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TIMER PROG. DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER INSTANT SKIP PLAY DVD VCR PAUSE REV SKIP STOPSKIP FWD 1.3x/0.8x PLAYTIME SLIP TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH ENTER SETUP &1($%@%73,$@&/@WJOEE
34 EN SETTING A DISC TO PROTECT 1 Press [SETUP]. 2 Use [K / L] to select “DVD Menu”, then press [ENTER]. 3 Use [K / L] to select “Disc Protect OFF ON”, then press [ENTER]. e.g.) VR mode DVD-RW DVD Menu Format Finalize Disc Protect OFF ONDelete All Playlists 4 Use [K / L] to select “Yes”, then press [ENTER]. Protect this disc? Ye sNo A disc will be protected. This operation may take awhile to be completed. To prevent accidental recording, editing or erasing the titles, you can protect them from “DVD Menu” menu. Note To cancel the disc protect: • When you insert a disc protected with this unit, “Disc Protect ON OFF” will appear instead of “OFF ON”. DVD Menu Format Finalize Disc Protect ON OFFDelete All Playlists To release the protection for the disc, select “Disc Protect ON OFF” at step 3, then follow rest of the procedures. SE-R0297 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TIMER PROG. DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER INSTANT SKIP PLAY DVD VCR PAUSE REV SKIP STOPSKIP FWD 1.3x/0.8x PLAYTIME SLIP TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH ENTER SETUP &1($%@%73,$@&/@WJOEE
35EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others PLAYING THE DISCS IN OTHER DVD PLAYERS 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. “General Setting” menu will appear. 2 Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear. 3 Use [K / L] to select “Auto Finalize”, then press [ENTER]. 4 Use [K / L] to select “Disc Full” or “End of Timer Rec”, then press [ENTER]. Auto Finalize Disc Full End of Timer Rec 5 Use [K / L] to select “ON”, then press [ENTER]. Disc Full ON OFF End of Timer Rec ON OFF Your setting will be activated. 6 Press [SETUP] to exit. You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. Auto Finalizing SE-R0297 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TIMER PROG. DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER INSTANT SKIP PLAY DVD VCR PAUSE REV SKIP STOPSKIP FWD 1.3x/0.8x PLAYTIME SLIP TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH ENTER SETUP Note • This function is not available after finishing daily or weekly program recording. &1($%@%73,$@&/@WJOEE
36 EN PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc 1 Press [SETUP]. 2 Use [K / L] to select “DVD Menu”, then press [ENTER]. “DVD Menu“ menu will appear. 3 Use [K / L] to select “Finalize”, then press [ENTER]. 4 Use [K / L] to select “Yes”, then press [ENTER]. e.g.) VR mode DVD-RW Finalize disc? Ye sNo Finalizing will start. Finalizing 90% This operation may take awhile to be completed. 5 Finalizing is completed. You will need to finalize discs to play back on other DVD players. Finalizing may take several minutes up to an hour. Since the process of the finalization fills empty space of the disc, a shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. SE-R0297 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TIMER PROG. DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER INSTANT SKIP PLAY DVD VCR PAUSE REV SKIP STOPSKIP FWD 1.3x/0.8x PLAYTIME SLIP TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH ENTER SETUP &1($%@%73,$@&/@WJOEE
37EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others PLAYING THE DISCS IN OTHER DVD PLAYERS To cancel finalizing... (DVD-RW only) Press [STOP C] during the finalizing is in progress. Use [K / L] to select “Yes”, then press [ENTER]. Finalizing is canceled and the unit switches to stop mode. Finalizing 5% Do you want to cancel ?Ye s No If “” appears when [STOP C] is pressed, you cannot cancel finalizing because the finalizing has already reached at a critical point in its process. If “No” is selected and [ENTER] or [RETURN] is pressed, finalizing is continued. You cannot cancel finalizing a DVD-R, DVD+R and DVD+RW once it has started. Note • Finalizing a disc in video mode and +VR mode automatically creates a title menu. • After you finalize the DVD+RW, you can call up the title list by pressing [TOP MENU], or you can call up the title menu by pressing [DISC MENU]. • Even after DVD+RW is finalized, you can still record or edit. After you finalize DVD-RW/-R or DVD+R, you cannot edit or record anything else on that disc. • If you insert a DVD-RW finalized with this unit, “Undo Finalization” will appear instead of “Finalize” at step 3. • To release the finalization of the DVD-RW disc, select “Undo Finalization” at step 3. DVD Menu Format Undo Finalization Disc Protect OFF ON Delete All Playlists • To undo the finalization of the DVD+RW, make an additional recording onto the disc. • DO NOT power off during finalizing. This may result in a malfunction. • For DVD+RW, if you have added or deleted chapters, or made chapters hidden, you must finalize the disc before being able to see those effects on other units. To play back discs other than DVD+RW on other DVD players, you will need to finalize. Finalizing a Disc (cont’d) &1($%@%73,$@&/@WJOEE
38 EN INFORMATION ON DVD RECORDING You can select a recording mode among 5 options, and the recording time will depend on the recording mode you select as follows. Recording modeRecording time Video/ Sound Quality 12cm 8cm XP 60 min 18 min SP120 min 36 min LP240 min 72 min EP 360 min 108 min SLP 480 min 144 min • The recording times listed above are estimates and are for reference purposes only. Actual recording times may vary. • The audio and video quality of content being recorded may differ depending on the recording mode/recording time chosen. Recording Mode You cannot record copy-protected program using this unit. Copy-protected video signal is included in DVD- videos, some satellite broadcasts, some pay-per-view stations and some “premium” stations. If copy-protected material is detected, recording will pause or stop automatically and an error message appears on the screen. “Copy-once only” video can only be recorded to CPRM compatible DVD-RW formatted in VR mode. What is “CPRM”? CPRM is a copy protection system with scramble system regarding the recording of “copy-once” broadcast programs. CPRM stands for Content Protection for Recordable Media. This unit is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot make another copy of those recordings. CPRM recordings can only be made on CPRM compatible DVD-RW format- ted in VR mode, and CPRM recordings can only be played back on DVD players that are specifically compatible with CPRM. Making discs playable in other DVD players (Finalize)For DVD-RW/-R, it is necessary to finalize the disc after recording, in order to play back the disc on other DVD players. (Refer to pages 35-37.) For DVD+RW/+R, it is recommended to finalize the disc in order to make the disc more compatible to other DVD player. When video and +VR mode disc are finalized, a title menu is created. You cannot finalize discs in other DVD recorders. Restrictions on Recording Note • This unit cannot record to CD-RW or CD-R. • All high definition pictures will be down converted to the standard definition pictures when they are recorded on this unit. • DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on a personal computer or a DVD or CD recorder may not be played back if the disc is damaged or dirty or if there is condensation on the player’s lens. • If you record a disc using a personal computer, even if it is recorded in a compatible format it may not be played back or dubbed because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) • Discs recorded in video mode on this unit cannot record additional information using other DVD recorders. • Since the recording is made by the VBR (variable bit rate) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the TV screen. &1($%@%73,$@&/@WJOEE
39EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others SETTINGS FOR A RECORDING Use this feature to make the discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title list is automatically converted to our style. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2) Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear. 3) Use [K / L] to select “Make Recording Compatible”, then press [ENTER]. 4) Use [K / L] to select “ON” or “OFF”, then press [ENTER]. Make Recording Compatible ON OFF ON: Title list will be replaced when you make additional recordings to the discs recorded by other units. OFF: Prohibiting additional record to the disc that has a title list created by other units. 5) Press [SETUP] to exit. Make Recording CompatibleSetting for Auto Chapter You can set a specified time for chapter marks. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2) Use [K / L ] to select “Recording”, then press [ENTER]. “Recording” menu will appear. 3) Use [K / L ] to select “Auto Chapter”, then press [ENTER]. 4) Use [K / L] to select a desired time option, then press [ENTER]. Auto Chapter OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes 5) Press [SETUP] to exit. Note • The interval for auto chapter may be up to two minutes different from the time option you set. • A blank chapter may be created depending on the remaining time of the disc. Note • This function is also available for unfinalized DVD+R. &1($%@%73,$@&/@WJOEE
40 EN SETTINGS FOR A RECORDING You can enjoy high quality sound recording. This function works only when the recording mode is set at XP. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2) Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear. 3) Use [K / L] to select “Recording Audio Select (XP)”, then press [ENTER]. 4) Use [K / L] to select “PCM” or “Dolby Digital”, then press [ENTER]. Recording Audio Select (XP) PCM Dolby Digital PCM: Records PCM audio for the best quality sound. Dolby Digital: Records Dolby Digital audio for good quality sound. 5) Press [SETUP] to exit. Recording Audio Select (XP)Setting Aspect Ratio for Video Mode Recording You can set aspect ratio for video mode recording. 1) Follow step 1 to 2 on “Recording Audio Select (XP)”. 2) Use [ K / L ] to select “Aspect Ratio (Video mode)”, then press [ENTER]. 3) Use [K / L ] to select your desired setting, then press [ENTER]. Aspect Ratio (Video mode) Auto 4 : 3 16 : 9 Auto (default): It will be recorded with whichever the ratio that the program you started to record are broadcasted with. 4:3 : Recorded in the aspect ratio of 4:3. 16:9 : Recorded in the aspect ratio of 16:9. 4) Press [SETUP] to exit. Note • “PCM” stands for Pulse Code Modulation. It changes analog sound to digital sound without compressing audio data. • When the recording mode is set at other than XP, the unit records “Dolby Digital” audio automatically even if you selected “PCM”. Note • For DVD-RW VR mode, the image will be recorded in whichever the ratio that the program you record are broadcasted with, regardless of the “Aspect Ratio (Video mode)” setting. • For DVD+RW/+R, the image will always be recorded in aspect ratio of 4:3. &1($%@%73,$@&/@WJOEE