Toshiba D Vr7kc2 Owner Manual
Have a look at the manual Toshiba D Vr7kc2 Owner Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others FUNCTIONAL OVERVIEW Front Panel 18151413 1920 161712118*97 124 3* 5 10 6 Rear Panel 12 5911131086712 3 4 (* ) The unit can also be turned on by pressing these buttons or by inserting a cassette tape. 1. I/y ON/STANDBY button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord.) 2. Cassette compartment (VCR) • Insert a cassette tape here. 3. A OPEN/CLOSE button (DVD)* • Press to open or close the disc tray. 4. Disc tray (DVD) • Place a disc when it is open. 5. VIDEO input jack (L2) • Use to connect external device with an RCA video cable. 6. AUDIO input jacks (L2) • Use to connect external device with an RCA audio cable. 7. I REC button (DVD) • Press once to start a recording. • Press repeatedly to start the one-touch timer recording. 8. PLAY B button (DVD)* • Press to start or resume playback. 9. STOP C button (DVD) • Press to stop playback or recording. • Press to stop the proceeding timer recording in DVD. 10. VCR/DVD button • Press to select the component you wish to operate. 11. VCR/DVD indicator • Lights up when the VCR/DVD output mode is selected. 12. DUBBING button • Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu. 13. CHANNEL / buttons • Press to change the channel up and down. 14. Display (“Off ” in standby) • Refer to “FRONT PANEL DISPLAY GUIDE” on page 18. 15. Infrared sensor window • Receive signals from your remote control so that you can control the unit from a distance. 16. I REC button (VCR) • Press once to start a recording. Press repeatedly to start the one-touch timer recording. 17. PLAY B button (VCR) • Press to start playback. 18. EJECT/STOP A/ C button (VCR) • When the unit is in stop mode, press to remove the cassette tape from the cassette compartment. • Press to stop cassette tape playback or recording. • Press to stop the proceeding timer recording in VCR. 19. FWD D button (VCR) • Press to rapidly advance the cassette tape, or view the picture rapidly in forward during playback (forward search). 20. REW E button (VCR) • Press to rewind the cassette tape, or to view the picture rapidly in reverse during playback (rewind search). 1. AC Power Cord • Connect to a standard AC outlet to supply power to this unit. • Unplug this cord from the AC outlet to completely shut down the unit. 2. HDMI OUT jack • Use an HDMI cable to connect to a display with an HDMI compatible port. 3. ANTENNA OUT jack • Use to connect an RF coaxial cable to pass the signal from the ANTENNA IN to your TV. 4. ANTENNA IN jack • Use to connect an antenna. 5. AUDIO OUT jacks • Use to connect a TV monitor, AV receiver or other device with an RCA audio cable. 6. VIDEO OUT jack • Use to connect a TV monitor, AV receiver or other device with an RCA video cable. 7. VIDEO IN jack (L1) • Use to connect external device with an RCA video cable. 8. AUDIO IN jacks (L1) • Use to connect external device with an RCA audio cable. 9. S-VIDEO IN jack (L1) • Use to connect the S-video output of external device with an S-video cable. 10. COMPONENT VIDEO OUT jacks • Use to connect a TV monitor with component video inputs with a component video cable. 11. S-VIDEO OUT jack • Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable. 12. AUDIO OUT jacks • Use to connect a TV monitor, AV receiver or other device with an RCA audio cable. 13. COAXIAL DIGITAL AUDIO OUT jack • Use to connect an AV receiver, Dolby Digital decoder or other device with a coaxial digital input jack with a digital coaxial cable. Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator. Caution on using S-video, component, or HDMI connection for VCR: • Only the playback audio / video is available with these connections. &1($%@%73,$@&/@WJOEE
12 EN FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit. • Replace the batteries when you notice a fall off in the operating range of the remote control. • The maximum operable ranges from the unit are as follows. - Line of sight: approx. 23 feet (7m) - Either side of the center: approx. 23 feet (7m) within 30° Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control. Caution: Never throw batteries into a fire. Note: • Be sure to use AA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. • When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination. • Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. Using a Remote Control 23feet (7m) 30˚ 30˚ 23feet (7m) 23feet (7m) 1 Open the cover. 2 Insert batteries. Make sure to match + and - on the batteries to the marks indicated in the battery compartment. 3 Close the cover. SE-R0297 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUD O T MER PROG. DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER INSTANT SKIP PLAY DVD VCR PAU S E REV SKIP STOPSKIP FWD 1.3x/0.8x PLAYTIME SLIP TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH 18 2 3 19 20 22 24 2526 3233 31 21 29 27 28 30 3534 23 45 7 11 12 13 9 6 8 10 1415 116 17 &1($%@%73,$@&/@WJOEE
13EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others FUNCTIONAL OVERVIEW 1. INPUT SELECT button • Press to select the appropriate input. 2. OPEN/CLOSE A button DVD mode: • Press to open or close the disc tray. VCR mode: • Press to remove the cassette tape from the cassette compartment. 3. Number/Character buttons • Press to enter values for the settings in the main menu. • Press to select channel numbers. DVD mode: • Press to select a title/chapter/track/file on display. • Press to enter title names. VCR mode: • Press to start the index/time search. 4. SETUP button • Press to display the main menu. • During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode. (Though appears, the output mode switches to the interlace and “” will be displayed on the front panel display briefly.) 5. DISC MENU button (DVD) • Press to display the disc menu. • Press to change the original and playlist on the TV screen. 6. Cursor K / L / { / B buttons • Press to select items or settings. 7. CLEAR button DVD mode: • Press to clear the password once entered, to cancel the programming for CD, to clear the selecting marker number in the display menu, etc. VCR mode: • Press to reset the tape counter. 8. INSTANT SKIP button (DVD) • During playback, press to skip 30 seconds. 9. REV E button DVD mode: • During playback, press to fast reverse playback. • When playback is in pause, press to slow reverse playback. VCR mode: • During playback, press to view the picture rapidly in reverse. • Press to fast reverse the cassette tape in stop mode. 10. PLAY B button • Press to start playback or resume playback. 11. SKIP H button (DVD) • During playback, press to return to the beginning of the current chapter, track or file. • During playback, press twice in quick succession to skip to the previous chapter or track. • When playback is in pause, press repeatedly to reverse the playback step by step. 12. PAUSE F button • Press to pause playback or recording. 13. DUBBING button • Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu. 14. REPEAT button DVD mode: • Press to select the repeat mode. VCR mode: • Press to set or release the Auto Repeat Playback. In the Auto Repeat Playback mode, tape is played to its end, the tape will rewind to the beginning and start playback itself. 15. TIMER SET button • Press to set the unit in the timer standby mode. In the timer standby mode, press to cancel the mode and to turn the unit on. 16. HDMI button (DVD) • Press to set the HDMI video resolution. 17. I/y ON/STANDBY button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord.) 18. CH / buttons DVD mode: • Press to change the channel up and down. VCR mode: • Press to change the channel up and down. • Press to adjust the tracking during playback or in slow motion of the cassette tape. • While playback is in still mode, you can stabilize the picture. 19. TIMER PROG. button • Press to display the timer programming list. 20. AUDIO button DVD mode: • During playback, press to display the audio menu. VCR mode: • During the playing of a HiFi video tape, press to change the audio out setting to HiFi or mono. 21. DISPLAY button • Press to display the display menu on or off. 22. TOP MENU button (DVD) • Press to display the title list. 23. ENTER button • Press to confirm or select menu items. 24. RETURN button • Press to return to the previous displayed menu screen. 25. TIME SLIP button (DVD) • Press once to start recording the TV program you are watching. Press again to watch the content being recorded from the beginning while recording continues. (VR mode DVD-RW with the recording mode of LP, EP or SLP only) 26. 1.3x/0.8x PLAY button (DVD) • During playback, press to play back in a slightly faster/slower speed while keeping the sound output. 27. FWD D button DVD mode: • During playback, press to fast forward playback. • When playback is in pause, press to slow forward playback. VCR mode: • During playback, press to view the picture rapidly in forward. • Press to fast forward the cassette tape in stop mode. • When playback is paused, press to view the cassette tape in slow motion. 28. SKIP G button (DVD) • During playback, press to skip to the next chapter, track or file. • When playback is in pause, press repeatedly to forward the playback step by step. 29. STOP C button • Press to stop playback or recording. DVD mode: • Press to exit from the title list. 30. DVD button • Press to select the DVD output mode. 31. VCR button • Press to select the VCR output mode. 32. REC I button • Press once to start a recording. • Press repeatedly to start the one-touch timer recording. 33. REC MODE button • Press to switch the recording mode. 34. ZOOM button (DVD) • During playback, press to enlarge the picture on the TV screen. 35. SEARCH button (VCR) Press to call up the index or time search menu. Note • If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available. Be sure to use [A OPEN/CLOSE] or [EJECT/STOP A / C ] on the unit. Remote Control Using a Remote Control (cont’d) &1($%@%73,$@&/@WJOEE
14 EN Because this product is a combination of a VCR and a DVD recorder, you m\ ust select which component you want to operate first with [VCR/DVD]. DVD mode Press [DVD] on the remote control. (Verify that the DVD indicator is lit.) VCR mode Press [VCR] on the remote control. (Verify that the VCR indicator is lit.) Note • You cannot switch to another mode (DVD or VCR) in the timer-standby mo\ de. • Playback will stop when you change the output mode. THE VCR / DVD RECORDER SWITCHING VCR button DVD button DVD indicator VCR indicator SE R0297 OPEN/ CLOSE INPUT SELECT HDMI @/ ABC GHI PQRS TUV SPACE SETUP D SPLAY AUD O TIMER PROG DISC MENU CLEAR RETURN TOP MENU WXYZ JKL MNO DEF ENTER NSTANT SKIP PLA Y DVD VCR PAUSE REV SK P STOPSK P FWD 1 3x 0 8x PLAYTIME SL P TIMER SET ZOOM SEARCH REPEAT REC REC MODE DUBBING CH &1($%@%73,$@&/@WJOEE
15EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CH 10 1/ 5 1/ 5-RWVRORG0:01:00 / 1:23:45 SP 1:53 25 613 7 4 * This is an example screen only for explanation. 1. Indicates a disc type and format mode. 2. Indicates a type of titles for VR mode DVD-RW . 3. Indicates a channel number or selected external input mode. 4. Indicates a recording mode and possible recording time left. 5. Indicates a title number/total number of titles, chapter number/total number of chapters, elapsed time and total time of disc playback. 6. Each icon means: : Search : Audio : Subtitle : Angle : Repeat : Marker : Noise Reduction / Black Level : Zoom : Surround 7. Indicates an operation status. This unit uses the following on-screen displays and menus to guide you t\ o the easy operations. The on-screen displays give you the information on the loaded disc, the \ disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing \ back, recording, or editing to suit your preference. On-Screen Display / Menu GUIDE TO ON-SCREEN DISPLAYS AND MENUS Disc Information / MenuThe on-screen display changes in the following order as you press [DISPLAY]. OFF Disc Information/Menu Title Name Information (only when DVD+RW/+R, VR mode DVD-RW/-R, or unfinalized video mode DVD-RW/-R is in playback) or File Name Information (only when a CD with MP3/WMA/ JPEG/DivX® files is in playback) MP3/WMA Tag Information (only when a MP3 or WMA file is in playback) HDMI Information (only for the images output through the HDMI output) DVD mode Note • In some descriptions on this manual, only one disc type is indicated as an example. &1($%@%73,$@&/@WJOEE
16 EN • First, track name will be displayed. Track Name • If you press [DISPLAY] one more time, artist name will be displayed. Artist Name • If you press [DISPLAY] one more time, album name will be displayed. Album Name • If there is no artist, track or album name, “Not Available” will be displayed. MP3/WMA Tag Information Video Info. : 480p / YCbCr Audio Info. : Bitstream 21 3 1. Indicates the resolution of the HDMI output image. 2. Indicates the HDMI video format. 3. Indicates the HDMI audio format. • “- - -” will be displayed, when it does not have any information. HDMI Information GUIDE TO ON-SCREEN DISPLAYS AND MENUS Title name information Title NameMy Title File name information File NameMy File Title/File Name Information 0:00:00 HIFI SP 12:00AM 453 2 1 * This is an example screen only for explanation. 1. Indicates current video status. 2. Indicates the current time. 3. Indicates a recording or playing back mode. 4. Indicates a tape counter. 5. Audio status of the current cassette tape. VCR mode VCR Information Note • VCR information does not appear on the screen when the unit is connected by an HDMI, Component or S-video cable, except during the playback. On-Screen Display / Menu (cont’d) &1($%@%73,$@&/@WJOEE
17EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others 1. Format: (DVD-RW, DVD+RW only) Allows you to format the disc. 2. Finalize: Allows you to finalize a disc containing recorded titles. 3. Disc Protect: (VR mode DVD-RW, DVD+RW/+R only) Allows you to protect a disc from accidental editing or recording. 4. Delete All Playlists: (VR mode DVD-RW only) Allows you to delete playlist. 5. Random Play: Allows you to activate the random playback feature. 6. Program Play: (Audio CD only) Allows you to activate the program playback feature. 7. Music: Allows you to make setting for MP3/WMA playback. 8. Photo: Allows you to make setting for JPEG playback. 9. Slide Show: (JPEG files only) Allows you to select the display time of the slide show mode. DVD Menu Format Finalize Disc Protect OFF ONDelete All Playlists 1 2 3 4 When a JPEG/MP3/WMA disc is inserted : GUIDE TO ON-SCREEN DISPLAYS AND MENUS Main Menu Press [SETUP] to display the main menu. Then use [ K / L ] to select a menu and press [ENTER] to display the menu. These menus provide entries to all main functions of the unit. 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4. DVD Menu: To set up the DVD setting. 5. DISC Playback Mode: To set up the disc playback setting. • “DISC Playback Mode” is available only when an audio CD, a CD-RW/-R with MP3 / WMA / JPEG files is inserted into the unit. Setup Timer Programming Title List DVD Menu DISC Playback Mode General Setting 12345 DVD Menu / DISC Playback Mode General Setting Menu General Setting Playback Display Video Recording Clock Channel DivX HDMI Reset All1 2 3 4 5 6 7 8 91. Playback: To set up the unit to play back discs as you prefer. 2. Display: To set up the OSD screen as you prefer. 3. Video: To set up the video setting. 4. Recording: To set up the unit to record to discs as you prefer. 5. Clock: To set up the clock. 6. Channel: To adjust the channel setting of the unit as you prefer. 7. DivX: To set up the setting for the DivX® playback. 8. HDMI: To set up the HDMI connection setting. 9. Reset All: To reset the setting to the factory default. DISC Playback Mode Music Photo Random Play Slide Show 7859 When Audio CD is inserted : DISC Playback Mode Random Play Program Play5 6 &1($%@%73,$@&/@WJOEE
18EN FRONT PANEL DISPLAY GUIDE PMVCR DB DVD1 4 2 3 Appears when data is being recorded on a disc. Appears when a disc is loaded on the disc tray. DVD Appears when the disc tray is opening. DVD Appears when HDMI video resolution (720p) is selected. Appears when HDMI video resolution (1080p) is selected. Appears when HDMI video resolution (480p) is selected. Appears when HDMI video resolution (1080i) is selected. DVD DVD DVD DVD Appears when the disc tray is closing. DVD DVD Display Message 1. : Appears in the afternoon with the clock display. 2 . Title / track / file and chapter mark : Appears when indicating a title/track number. : Appears when indicating a chapter number. 3. Current status of the unit : Appears when playback is paused. : Appears when playing back a disc. : Appears when the timer programming or OTR is proceeding. : Appears during recording process. : Flashes when a recording pauses. : Appears when this unit is in DVD output mode and a disc is in the unit. : Appears during duplication process. : Appears when this unit is in VCR output mode and a cassette tape is in the unit. : Appears during duplication process. : Appears when this unit is in VCR output mode.: Appears when the timer recording is proceeding in VCR. : Appears when this unit is in DVD output mode. : Appears when the timer recording is proceeding in DVD. : Appears during VCR to DVD duplication process. : Appears during DVD to VCR duplication process. 4. Displays the following • Elapsed playback time • Current title / chapter / track / file number • Recording time / remaining time • Clock • Channel number • Remaining time for one-touch timer recording • Selected HDMI video resolution Note • Front panel display stays off while the unit is in the standby mode. This is a new Power Save (ECO) feature. &1($%@%73,$@&/@WJOEE
19EN Disc Management Recording Playback Introduction Connections Basic Setup Editing Function Setup VCR Function Others CONNECTION Read this first: 1) Disconnect the AC power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) After making all the connections, connect the AC power cords of the devi\ ces. rear of this unit ANT. INThis connection is for TV loop through only OUT IN ANTENNA VHF / UHFantenna cable TV company RF coaxial cable or RF coaxial cable Choose one of the following connections depending on the jacks on your TV. Note • For your safety and to avoid damage to the device, please unplug the RF \ coaxial cable from the ANTENNA IN jack before moving the unit. • Outdoor or attic antennas will be more effective than set-top versions. • ANTENNA OUT jack is for tuner pass through only. DVD playback through th\ e RF is not possible. Overview If Your TV hasRefer to If you are using cable / satellite box StandardQualityHigher Quality If your device has only an ANT. IN jack page 22 COMPONENT VIDEO IN AUDIO INLRVIDEO IN page24 page23 page21 page 21 page20 S-VIDEO IN HDMI IN ANT. IN • Connect this unit directly to the TV. If the RCA audio/video cables are \ connected to a VCR, DVD playback pictures may be distorted due to the copy protection system. Supplied cables used in this connection are as follows: • RF coaxial cable x 1 Please purchase the rest of the necessary cables at your local store. Antenna Connection (Required) &1($%@%73,$@&/@WJOEE
20 EN Connecting to a TV Using Audio / Video Out Jacks rear of this unit ANT. IN OUTIN ANTENNA VHF / UHFantenna cable TV company RF coaxial cable or This connection is for TV loop through only RF coaxial cable RCA audio cable RCA video cable L R I N --- AU D I O --- OU T I N --- VIDEO --- OU T AUDIO IN L R VIDEO IN CONNECTION Supplied cables used in this connection are as follows: Please purchase the rest of the necessary cables at your local store. &1($%@%73,$@&/@WJOEE