Toshiba B852 User Manual

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33055 
1.5 Appearance
 
E1- 3 
1.5 Appearance 
 
1.5.1 Dimensions 
 
 
 
 
 
 
 
 
 
1.5.2 Front View 
 
 
 
 
 
 
 
 
 
 
 
1.5.3 Rear View
 
 
 
 
The names of the parts or units introduced in this section are used in the 
following chapters. 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NOTE: 
Depth is 470 mm (18.5 inches) 
when the optional Cutter 
Module is installed on the 
printer.  
Dimensions in inches +(mm)
15.2 (385)7.1 (181) 
16.8 (427) 
10.4 (265) 10.4 (265)...

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33055 
1.5 Appearance
 
E1- 4 
1.5.4 Operation Panel 
 
 
 
 
 
 
 
 
 
 
 
 
1.5.5 Interior 
 
  
 
 
 
 
Please see Section 3.1 for further information about the Operation Panel.  
 
 
 
 
 
 
 
 
 
 
LCD Message
Displa
yON LINE LED 
(Green) 
ERROR LED 
(Red) 
[PAUSE] key
POWER LED
(Green)
[FEED]key
[RESTART] key
Print HeadPrint Head Block
Head Block  
Release Lever  Ribbon Holde
r
Paper Guide
Black Mark/ 
Feed Gap SensorPlaten
Supply Loading Instructions  Supply...

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33055 
1.6 Options
 
E1- 5 
1.6 Options
 
Option Name  Type  Description 
Cutter module  B-7208-QM-R  A stop and cut swing cutter. 
Expansion I/O interface 
board B-SA704-IO-QM-R  Installing this board in the printer allows a connection 
with an external device with the exclusive interface, 
such as the keyboard module.  
Serial Interface board  B-SA704-RS-QM-R  Installing this PC board provides an RS232C interface 
port. 
Wireless LAN board  B-SA704-WLAN-QM-R...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2. PRINTER SETUP
 
E2- 1 
2. PRINTER SETUP 
This section outlines the procedures to setup your printer prio r to its operation.  The section includes precautions, 
loading media and ribbon, connecting cables, setting the ope rating environment of the printer, and performing an 
online print test. 
 
 Reference Procedure Setup Flow 
After referring to the Safety Precautions in this
manual, install the printer on a safe and stable
location. 
Connect a power cord...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.1 Installation 
 
E2- 2 
2.1 Installation 
 
  To insure the best operating environment, and to assure the safety of the 
operator and the equipment, please observe the following precautions. 
• 
Operate the printer on a stable, leve l, operating surface in a location 
free from excessive humidity, high temperature, dust, vibration or 
direct sunlight. 
•  Keep your work environment static  free.  Static discharge can cause 
damage to delicate internal...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.2 Assembling the Accessories
 
E2- 3 
2.2 Assembling the  Accessories 
 
2.2.1  Assembling the Supply 
Holder Frame 
 
 
 
 
 
 
 
 
  The following procedure outlines th
e steps required to assemble the 
Supply Holder Frame and attach the frame to the B-852 printer in 
preparation for loading the media. 
 
1.   Assemble the Supply Holder Frame (L) and Supply Holder Frame (R) 
to the Supply Holder Base using th e two M-4X6 Wing Bolts supplied, 
as shown...

2. PRINTER SETUP ENGLISH VERSION EO1-33028 2.3 Connecting the Power Cord
 
E2- 4 
2.3 Connecting the  Power Cord
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  1.
  Make sure that the printer power switch is in the off position. 
 
 
 
2.   Connect the Power Cord to the pr inter as shown in the figure below. 
 
 
 
3.  Plug the other end of the Power Cord into a grounded outlet as shown 
in the figure below. 
 
 
  
 
  [Example of US Type(QQ model)]  [Example of EU Type(QP model)]...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.4 Loading the Media
 
E2- 5 
2.4  Loading the Media 
 
 
 
 
2.4.1  Installing the Media  onto the Supply Holder 
Unit 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  The following procedure will outline th
e steps required to install the 
media onto the Supply Holder Unit and  adjust its position in the Supply 
Holder Frame at the rear of the B-852 printer.  The procedure will then 
show the steps to properly load the medi a into the...

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.4 Loading the Media
 
E2- 6 
2.4.1  Installing the Media  onto the Supply Holder 
Unit (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  The diagram below, and the steps th
at follow, show the procedures for 
installing the Media onto the Supply Shaft and reassembling the Supply 
Holder Unit.  Be sure to follow the  step-by-step procedure exactly or the 
auto centering mechanism may not work properly....

2. PRINTER SETUP ENGLISH VERSION EO1-33055 2.4 Loading the Media
 
E2- 7 
2.4.2  Installing the Supply  Holder Unit onto the 
Supply Holder Frame 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.4.3  Loading Media into the Printer 
 
 
 
 
 
 
 
 
 
 
 
 
 
  1.
  Insert the assembled Supply Holder  Unit into the rear notches of the 
  Supply Holder Frame as shown in the diagram below.   
 
 
 
2.   Now feed the media from the bottom of the media roll into the media 
slot at the rear of the printer as shown. 
 
 
 
The...