Toshiba B Ex4 User Guide

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 1.4 Accessories
 
E1- 2 
1.4 Accessories 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When unpacking the printer, please make sure all the following 
accessories are supplied with the printer.  
 
…  CD-ROM (1 pc.)  
  
 
 
 
 
 
 
 
 
…  Power cord
  
 
 
 
 
…  
Safety precautions  … Quick installation manual  
 
 
 
 
 
 
 
 
 
 
 
 
• Bar code printer application (BarTender Ultra Lite) 
•  Windows Driver 
•  Owners Manual...

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 
1.5 Appearance
 
E1- 3 
1.5 Appearance 
 
1.5.1 Dimensions 
 
 
 
 
 
 
 
 
1.5.2 Front View 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.5.3 Rear View
 
 
 
 
The names of the parts or units introduced in this section are used in the 
following chapters. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
278 (10.9)460 (18.1) 
Dimensions in mm (inches) 
310 
(12.2)
Top Cover 
Media OutletSupply Window 
LCD Message Display
Operation Panel
Reserved for...

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 
1.5 Appearance
 
E1- 4 
1.5.4 Operation Panel 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.5.5 Interior 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Please see Section 3 for further information about the Operation Panel.  
 
 
 
 
LCD 
ERROR LED
PAUSE
RESTART
UP 
RIGHT
ENTER
DOWN
CANCEL
MODE
LEFT
FEED
ONLINE LED
Print Head
Platen
Head LeverRibbon Shaft 
Supply Shaft 
Supply Holder 
Locking Ring
Ribbon Stopper
Print Head Block 

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33089 
1.6 Options
 
E1- 5 
1.6 Options 
 
  
 
 
 
 
 
 
 
 
Option Name  Type  Description 
Disc cutter module  B-EX204-QM-R  Disc cutter 
Each time media is cut, the media feed is stopped.  
Rotary cutter module  B-EX204-R-QM-R  Rotary cutter 
On-the-fly (non-stop) cut operation is enabled. 
Strip module  B-EX904-H-QM-R  This allows use of on-demand (peel-off) operation or 
to take-up labels and backing paper together when 
using the rewind guide plate. To...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2. PRINTER SETUP 
 
E2- 1 
2. PRINTER SETUP 
This section outlines the procedures to setup your printer  prior to its operation.  The section includes precautions, 
loading media and ribbon, connecting cables, setting the ope rating environment of the printer, and performing an 
online print test. 
 
 
 
Reference Procedure Setup Flow 
After referring to the Safety Precautions in this 
manual, install the printer on a safe and stable 
location. 
Connect a power...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.1 Installation 
 
E2- 2 
2.1 Installation 
 
  To insure the best operating environment, and to assure the safety of the 
operator and the equipment, please observe the following precautions. 
• 
Operate the printer on a stable, level, operating surface in a location \
free from excessive humidity, high temperature, dust, vibration or 
direct sunlight. 
•  Keep your work environment static free.  Static discharge can cause 
damage to delicate internal...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.2 Connecting the Power Cord
 
E2- 3 
2.2 Connecting the  Power Cord 
 1.   Make sure that the printer Power Switch is in the OFF ( {) position. 
  Connect the Power Cord to the pr inter as shown in the figure below. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.   Plug the other end of the Power Cord into a grounded outlet as shown 
in the figure below. 
 
 
 
 
 
 
 
 
 
 
  [Example of US Type]  [Example of EU Type]
 
 
CAUTION! 
1.  Make sure that the printe
r 
Power...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies
 
E2- 4 
2.3 Loading Supplies 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
1.  Do not touch any moving parts .  To reduce the risk of fingers, jewellery, clothing, etc., being 
drawn into the moving parts, be sure to l oad the media once the printer has stopped moving 
completely.   
2.  The Print Head becomes hot immediately after prin ting.  Allow it to cool before loading the media.
3.  To avoid injury, be careful not to trap  your fingers while...

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies
 
E2- 5 
2.3.1  Loading the Media 
 
 
 
 
 
 
 
 
 
 
 
  The following procedure shows the step
s to properly load the media into 
the printer so that it feeds straight and true through the printer. 
 
The printer prints both labels and tags. 
1.   Turn off the power and open the Top Cover. 
2.   Turn the Head Lever to  FREE position, then release the Ribbon Shaft 
Holder Plate.  
3.   Open the Print Head Block....

2. PRINTER SETUP ENGLISH VERSION EO1-33089 2.3 Loading Supplies
 
E2- 6 
2.3.1  Loading the Media  (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
7.
  Align the projection of the Supply Holder with the groove of the 
Supply Shaft, and push the Supply Holder against the media until the 
media is held firmly in place.  This will centre the media 
automatically. 
Then turn the Locking Ring clockw ise to secure the Supply Holder.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
8.   Place the media between the Media...