TomTom Trucker User Manual

101 
 
 
 
About danger zones and risk zones 
The Danger Zones service warns you about danger zones and risk zones on your route when you are 
in France. 
Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile 
speed cameras when you are driving in France. To be compliant with this change in French law, 
speed camera locations are no longer reported but instead areas of danger are indicated as danger 
zones and risk zones. 
Important: Outside of France, you...

102 
 
 
 
 A symbol is shown in the route bar and on your route on the map. 
 Your distance to the start of the zone is shown in the route bar.  
 You hear a warning sound as you get near the start of the zone. 
 While you are approaching a zone or driving in a zone, your speed is monitored. If you drive 
more than 5 km/h or 3 mph over the speed limit the route bar turns red. If you drive less than 5 
km/h or 3 mph over the speed limit the route bar turns orange. 
 While you are driving in a zone...

103 
 
 
 
If a new temporary risk zone is reported directly before or after an existing risk or danger zone, 
then the new zone is added to the existing zone. 
If enough Danger Zones users report a new risk zone, that zone may become a danger zone and be 
available for all subscribers. 
You can report a risk zone in two ways: 
Using the quick menu to report a risk zone 
1. Select the current location symbol or the speed panel in the guidance view. 
2. Select Report Risk Zone from the pop-up menu. 
You...

104 
 
 
 
About My Places 
My Places provides an easy way to select a location without the need to search for the location each 
time. You can use My Places to create a collection of useful or favourite addresses. 
Tip: The terms favourite and place mean the same thing - favourites are places that you go to 
often. 
The following items are always in My Places: 
 Home - Your home location can be your home address or somewhere you often visit. This 
feature provides an easy way to navigate there. 
 Work...

105 
 
 
 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the home or work location symbol. 
 
 Select the Search button and search for a location. Select a location to set as home or work. 
Select Set home location or Set work location. 
Setting your home or work location using the map 
1. In the Map View, move the map and zoom in until you can see your home or work location. 
2. Select the location by pressing and holding the screen for...

106 
 
 
 
A pop-up menu shows the nearest address. 
1. Open the pop-up menu and select Add to My Places. 
2. In the name bar, enter the name Home. 
Note: Home must have a capital letter H. 
3. Select Add. 
Your home location is changed to the new location.  
Adding a location from My Places 
1. In the Main Menu, select My Places. 
2. Select Add a new place. 
3. To select a location, do one of the following: 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-...

107 
 
 
 
Adding a location to My Places using search 
1. In the Main Menu, select Search. 
2. Search for a location. 
3. Select the location then select Show on map. 
4. When the map view shows the location, select the pop-up menu button. 
 
5. Select Add to My Places. 
The name of the location appears in the edit screen. 
6. Edit the name of the location so you can easily recognise it. 
7. Select Done to save your location in the My Places list.  
Adding a location to My Places by marking 
To mark a...

108 
 
 
 
My Vehicle 
Important: Route planning for a specific vehicle type is available only when a truck map is installed. 
If a truck map is not installed, a car route is planned instead. 
Select Settings in the Main Menu, then select My Vehicle. 
 
On this screen, you can set your vehicle type and dimensions. 
Routes planned by your device avoid restrictions for the vehicle type, and take into account the 
vehicles specifications. 
 Vehicle Type 
Select this setting to choose your vehicle type....

109 
 
 
 
 Guidance view 
Select Guidance view to change the information you see in the guidance view. 
 Automatic zoom 
Select Automatic Zoom to change how you view a junction as you drive. 
 Automatic map view switching 
By default, automatic changing of views is on. This means, for example, that your Trucker 
shows the map view when an alternative route is being suggested, along with several other sets 
of circumstances. Also, for example, that your Trucker shows the guidance view when you start...

110 
 
 
 
Select Arrival information to change the arrival information you see in the route bar. 
Select Route information to change the route information you see on the route bar. 
Show current time 
Select this setting to show the current time in the guidance view. When switched on, the current 
time is shown at the bottom of the route bar. 
Show wide route bar if possible 
The wide route bar is not shown by default. You can select this setting to switch on the wide route 
bar in the guidance view....