TomTom Trucker User Manual

91 
 
 
 
The voice control screen is shown and your Trucker says Im listening. When voice control is 
ready to listen, you see a microphone icon in the bottom left corner and you hear a beep. 
 
2. Say the command Drive home. 
Tip: Say All commands to see a list of commands you can say. Alternatively, select Help in 
the Main menu, then select Voice control and then select Which commands can I say?. 
For some commands, your Trucker repeats what you say and asks for confirmation. 
3. If the command is...

92 
 
 
 
3. If the command is correct, say Yes. 
If the command is incorrect, say No and repeat the command after you hear Im listening. 
The volume on your Trucker changes to 50%. 
Tip: To stop voice control, say Cancel. To go back one step, say Back.  

93 
 
 
 
About Map Share 
You can report map changes using Map Share. These map changes are then shared with other 
TomTom device users when they receive a map update. 
There are two ways to report a map change: 
 Select a location on the map and create the change report immediately. 
 Mark a location and create the change report later. 
To send your map change reports to TomTom, you must connect your Trucker to your computer and 
use MyDrive Connect. 
All map changes are verified by TomTom. These...

94 
 
 
 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
 
5. Follow the instructions for your chosen type of map change. 
6. Select Report. 
7. Connect your Trucker to MyDrive Connect to send your map change report to TomTom and 
receive map changes from other TomTom users.  
Creating a map change report from a marked location 
If you see a map inconsistency while you are driving, you can mark the location so you can report 
the...

95 
 
 
 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
7. Follow the instructions for your chosen type of map change. 
8. Select Report. 
The marker for the marked location is removed from the map. 
9. Connect your Trucker to MyDrive Connect to send your map change report to TomTom and 
receive map changes from other TomTom users.  
Types of map change 
There are several types of map change available. 
Note: If you want to report a...

96 
 
 
 
Turn Restriction 
Select this option to report incorrect road turn restrictions. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Turn Restriction. 
5. If the incorrect junction is shown, select Select another junction.  
6. Select the approach direction. 
The map rotates so that the direction you are coming from is shown at the bottom of the 
screen. 
7....

97 
 
 
 
About speed cameras 
The Speed Cameras service warns you about the following camera locations: 
 Fixed speed camera locations. 
 Mobile speed camera locations. 
 Mobile speed camera hotspots. 
 Average speed camera locations. 
 Speed enforcement zones. 
 Red light camera locations. 
 Traffic restriction cameras. 
The Speed Cameras service also warns you about the following safety hazards: 
 Accident blackspot locations. 
To get TomTom services on your Trucker, you must be connected to...

98 
 
 
 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Fixed speed camera - this type of camera 
checks the speed of passing vehicles and is fixed 
in one place. 
   
Mobile speed camera - this type of camera 
checks the speed of passing vehicles and can be 
moved to different locations. 
   
Mobile speed camera hotspots - this type of 
warning shows places where mobile cameras are 
often used. 
   
Average speed cameras - these types of 
cameras measure your average speed between...

99 
 
 
 
Changing the way you are warned 
To change the way you are warned about speed cameras, select the Sounds and Warnings button in 
the Settings menu. 
 
You can then set how you want to be warned for the different types of cameras and safety hazards. 
You can change settings for whether you want to be warned, never warned or warned only if you 
are speeding. 
For example, to change how you are warned when you approach a fixed speed camera, do the 
following: 
1. Select Sounds & Warnings in the...

100 
 
 
 
2. Select Report Speed Camera. 
 
You see a message thanking you for adding the camera. 
Tip: If you make a mistake when reporting a camera, select Cancel in the message. 
The speed camera is saved on your Trucker automatically and also sent to other users.  
Confirm or remove a mobile speed camera 
You can confirm the presence of a mobile speed camera or remove a mobile speed camera if it is no 
longer present. 
Just after you pass a mobile speed camera, in the route bar you are asked if the...