TomTom Rider 410 400 40 User Manual

							81 
 
 
 
A pop-up menu shows a list of options.  
 
3. Select Change to a Stop. 
Your route is replanned with the starting point changed into a stop.  
Finding a car park 
Important: In the interest of safety and to avoid distractions while you are driving, you should 
always plan a route before you start driving. 
To find a car park, do the following: 
1. Select the Main Menu button to open the Main Menu.  
 
2. Select Parking. 
 
The map opens showing the locations of car parks. 
 
If a route is planned, the map shows car parks near your destination. If a route isnt planned, 
the map shows car parks near your current location.  
						

							82 
 
 
 
You can change the screen to show a list of car parks by pressing this button: 
 
You can select a car park from the list to locate it on the map. 
Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. 
 
If you want to change how the search is done, select the button to the right of the search box. 
You can then change where the search is carried out, for example, to search near you or the 
whole map.  
 
3. Select a car park from the map or the list. 
A pop-up menu opens on the map showing the name of the car park. 
 
4. Select Drive/Ride depending on which device you are using.  
						

							83 
 
 
 
A route is planned and then guidance to your destination begins. As soon as you start driving, 
the guidance view is shown automatically. 
Tip: You can add a car park as a stop on your route by using the pop-up menu. 
 
Finding a petrol station 
Important: In the interest of safety and to avoid distractions while you are driving, you should 
always plan a route before you start driving. 
To find a petrol station, do the following: 
1. Select the Main Menu button to open the Main Menu.  
 
2. Select Petrol Station. 
 
The map opens showing the locations of petrol stations. 
 
If a route is planned, the map shows petrol stations along your route. If a route isnt planned, 
the map shows petrol stations near your current location. 
You can change the screen to show a list of petrol stations by pressing this button: 
 
You can select a petrol station from the list to locate it on the map.  
						

							84 
 
 
 
Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. 
 
If you want to change how the search is done, select the button to the right of the search box. 
You can then change where the search is carried out, for example, to search near you or the 
whole map.  
 
3. Select a petrol station from the map or the list. 
A pop-up menu opens on the map showing the name of the petrol station. 
 
4. Select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, 
the guidance view is shown automatically. 
Tip: You can add a petrol station as a stop on your route by using the pop-up menu. A petrol 
station that is a stop on your route has a blue icon.  
						

							85 
 
 
 
The Current Route menu 
When you have planned a route or track, select the Current Route or Current Track button in the 
Main Menu to open the Current Route or Current Track Menu. 
The following buttons are available in the menu: 
Clear Route / Clear 
Track 
  
  
Select this button to clear the currently planned route or track. 
The Current Route Menu closes and you return to the map view. 
Skip Next Stop 
  
Select this button to skip the next stop on your route. 
Find Alternative 
  
You see this button when you have planned a route. Select this button to 
show up to three alternative routes on the map view. 
Avoid Blocked Road 
  
Select this button to avoid an unexpected obstacle that is blocking the 
road on your route.  
Avoid Part of Route 
 
 
Select this button to avoid part of a route. 
Avoid Toll Roads 
and More 
  
Select this button to avoid some types of route features that are on your 
currently planned route. These include ferries, toll roads and unpaved 
roads. 
You can also avoid route features using the route bar. 
Changing your route  
						

							86 
 
 
 
Show Instructions 
  
Select this button to see a list of turn-by-turn text instructions for your 
planned route.  
The instructions include the following: 
 Your current location. 
 Street names. 
 Up to two road numbers shown in road shields whenever available. 
 An instruction arrow. 
 An instruction description. 
 The distance between two consecutive instructions. 
 Exit number. 
 The full addresses of stops on your route. 
Tip: Select an instruction to see a preview of that section of the route 
in the map view. 
You can also select the instruction panel in the guidance view to see 
turn-by-turn text instructions. 
Add Stop to Route 
  
Select this button to add a stop to your currently planned route. You can 
also add a stop to your route directly from the map. 
Add to My Routes 
  
If you plan a new route that has not already been saved, you see this 
button. Select this button to save this route as part of your My Routes list. 
Save Changes to 
Route 
  
If you make a change to a My Route, you see this button. Select this 
button to save the changes. 
Change Route Type 
  
Select this button to change the type of route used to plan your route. 
Your route will be recalculated using the new route type. 
Reorder Stops 
  
Select this button to see the lists of stops for your current route. You can 
then change the order of the stops on your route. 
For a route without stops, you can also select this button to reverse your 
route.  
						

							87 
 
 
 
Drive to Route or 
Track 
  
  
Select Drive to Route to plan a route from your current location to the 
starting point of a My Route. The starting point is converted to a stop. 
Drive to Track plans a route to the nearest point of the track from your 
current position.  
Drive to Starting 
Point 
  
On the Current Track menu, select this button to plan a route to the 
starting point of the track. The starting point is converted to a stop. For 
more information, see Navigating using a track. 
Play Route or 
Track Preview 
  
Select this button to watch a preview of your planned route or track. 
Stop Route or 
Track Preview 
  
Select this button to stop the preview of your planned route or track. 
 
Avoiding a blocked road 
If there is a blocked road on your route you can change your route to avoid it. 
1. In the guidance view, select the current location symbol or the speed panel. 
Tip: The speed panel is only shown when you have started driving on your route.  
2. Select Avoid Blocked Road. 
A new route is found that avoids the blocked road. You may get shown up to two alternatives 
depending on the road network between you and your destination.  
The new route is shown on the map view with the difference in travel time in a balloon. 
Note: It may not be possible to find an alternative route around the blocked road if none 
exists. 
3. Select the new route by selecting the time balloon. 
Guidance to your destination resumes avoiding the blocked road. As soon as you start driving, 
the guidance view is shown automatically.  
Avoiding part of a route 
If part of a road is blocked or you wish to avoid part of a route, you can select a specific section of 
a route to avoid.  
						

							88 
 
 
 
1. Select the Main Menu button to open the Main Menu.  
 
2. Select Current Route. 
 
3. Select Avoid Part of Route. 
 
A screen opens showing a list of the sections that comprise your current route. 
4. Select the section of the route that you want to avoid. 
A preview shows you the section you have chosen on the map. 
5. Select Avoid. 
A new route is found that avoids your chosen route section. The new route is shown on the map 
view. 
Note: It may not be possible to find an alternative route around the route section if none 
exists. 
Guidance to your destination resumes avoiding your chosen route section. As soon as you start 
driving, the guidance view is shown automatically.  
Types of route 
Select Change Route Type to change the type of route planned to your current destination. Your 
route is recalculated using the new route type. 
You can select the following types of route: 
 Fastest route - the fastest route to your destination. Your route is constantly checked taking 
into account the traffic conditions. 
 Shortest route - the shortest route to your destination. This may take much longer than the 
fastest route. 
 Most eco-friendly route - the most fuel-efficient route. 
 Avoid motorways - this type of route avoids all motorways. 
 Winding route - the route with the most turns. 
Note: Winding routes are only available for TomTom Rider navigation devices. 
 Walking route - this type of route is optimised for walking. 
 Bicycle route - this type of route is optimised for bicycles. 
You can set the default route type in the Settings Menu.  
Route features 
You can choose to avoid some features that are on your currently planned route. You can avoid the 
following route features: 
 Toll Roads  
						

							89 
 
 
 
 Ferries and car shuttle trains 
 Carpool Lanes 
 Unpaved Roads 
Note: Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV lanes) and are 
not present in every country. To travel on these lanes, you may need to have more than one 
person in the car, for example, or the car may need to use environmentally-friendly fuel. 
If you choose to avoid a route feature, a new route is planned. 
In Route Planning in the Settings Menu, you can set how each route feature is handled when a new 
route is planned.  
Avoiding a route feature on your route 
You can avoid a route feature that is on your route. 
Note: It may not be possible to find an alternative route around the route feature if none exists. 
1. In the route bar, select the symbol for the route feature you want to avoid. 
The route feature is shown on the map. 
2. Select the pop-up menu button. 
 
3. Select Avoid in the pop-up menu. 
A new route is found that avoids the route feature.  
Adding a stop to your route from the current route menu 
1. In the Main Menu, select Current Route. 
2. Select Add Stop to Route. 
The map view is shown. 
3. To select a stop, do one of the following steps: 
 Zoom in on the map, then press and hold to select a location. In the pop-up menu, select 
Add to Current Route. 
 
 Select Search and search for a location. When you have found a location, select the Add 
Stop to Route button. 
Your route is recalculated to include your stop.  
Adding a stop to your route using the map 
1. Press the switch view button to show the map. 
Your complete route is shown on the map. 
2. Zoom in on the map, then press and hold to select a location.  
3. Select the pop-up menu button.  
4. Select Use in Route. 
5. Select Add to Current Route. 
  
						

							90 
 
 
 
Your route is recalculated to include your stop.  
Deleting a stop from your route 
1. Press the switch view button to show the map. 
Your complete route is shown on the map. 
2. In the route bar, press the stop you want to delete. 
The map zooms in to the stop and shows a pop-up menu. 
Tip: If you select the wrong stop press the back button to return to the map. 
3. Select Delete This Stop. 
The stop is deleted and your route is recalculated.   
Skipping the next stop on your route 
Tip: To make it easy to quickly skip a stop, move the button Skip Next Stop to the first screen of 
the Main Menu. 
1. In the Main Menu, select Current Route. 
2. Select Skip Next Stop. 
The map view is shown. The next stop on your route is deleted and your route is recalculated.  
Reordering stops on a route 
1. In the Main Menu, select Current Route. 
2. Select Reorder Stops. 
The map view is shown with the route cleared. The starting point, destination and all the stops 
are shown. 
3. Select the stops one by one in the order you wish to drive them. 
The symbols change to a flag as you select each stop. The last stop you select becomes your 
destination.  
Your route is recalculated with the stops in the changed order.