TomTom Rider 410 400 40 User Manual

							101 
 
 
 
About My Places 
My Places provides an easy way to select a location without the need to search for the location each 
time. You can use My Places to create a collection of useful or favourite addresses. 
Tip: The terms favourite and place mean the same thing - favourites are places that you go to 
often. 
The following items are always in My Places: 
 Home - Your home location can be your home address or somewhere you often visit. This 
feature provides an easy way to navigate there. 
 Work - Your work location can be your workplace address or somewhere you visit often. This 
feature provides an easy way to navigate there. 
 Recent destinations - Select this button to select your destination from a list of locations you 
have recently used as destinations. These also include your stops. 
 Marked locations - You can mark a location and temporarily add it to My Places. 
You can add a location to My Places directly in My Places, by selecting a location from the map, by 
searching for a location or by marking a location. 
Your home location, work location, marked locations and the locations that you have added appear 
in a list in My Places and are shown with a marker on the map. 
 
 
Setting your home and work locations 
You can set your home and work locations in the following ways: 
Setting your home or work location using My Places 
1. In the Main Menu, select My Places. 
2. Select Add Home or Add Work. 
3. To select a location for home or work, do one of the following: 
My Places  
						

							102 
 
 
 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the home or work location symbol. 
 
 Select the Search button and search for a location. Select a location to set as home or work. 
Select Set home location or Set work location. 
Setting your home or work location using the map 
1. In the Map View, move the map and zoom in until you can see your home or work location. 
2. Select the location by pressing and holding the screen for about one second. 
A pop-up menu shows the nearest address. 
1. Open the pop-up menu and select Add to My Places. 
2. In the name bar, enter the name Home or Work. 
Note: Home must have a capital letter H and Work must have a capital letter W. 
3. Select Add. 
Your home or work location is shown on the map.  
Changing your home location 
You can change your home location in the following ways. 
Changing your home location using My Places 
1. In the Main Menu, select My Places. 
2. Select Home. 
Your home location is shown on the map, with a pop-up menu. 
 
3. Select Edit Location. 
4. To select a new home location, do one of the following: 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the home location symbol. 
 Select the Search button and search for a location. Select a location to set as home. Select 
Set home location. 
Changing your home location using the map 
1. In the Map View, move the map and zoom in until you can see your new home location. 
2. Select the location by pressing and holding the screen for about one second. 
A pop-up menu shows the nearest address.  
						

							103 
 
 
 
1. Open the pop-up menu and select Add to My Places. 
2. In the name bar, enter the name Home. 
Note: Home must have a capital letter H. 
3. Select Add. 
Your home location is changed to the new location.  
Adding a location from My Places 
1. In the Main Menu, select My Places. 
2. Select Add a new place. 
3. To select a location, do one of the following: 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the add location symbol. 
 Search for a location. Select Show on Map, then select the add location symbol. 
 
The name of the location appears in the edit screen. 
4. Edit the name of the location so you can easily recognise it. 
5. Select Done to save your location in the My Places list.  
Add a location to My Places from the map 
1. Move the map and zoom in until you can see the destination that you want to navigate to. 
2. Press and hold to select the location. 
 
3. Select the pop-up menu button. 
 
4. Select Add to My Places. 
The name of the location is shown in the edit screen. 
5. Edit the name of the location so you can easily recognise it. 
6. Select Done to save your location in the My Places list. 
The location you added is shown with a marker on the map.   
						

							104 
 
 
 
Adding a location to My Places using search 
1. In the Main Menu, select Search. 
2. Search for a location. 
3. Select the location then select Show on map. 
4. When the map view shows the location, select the pop-up menu button. 
 
5. Select Add to My Places. 
The name of the location appears in the edit screen. 
6. Edit the name of the location so you can easily recognise it. 
7. Select Done to save your location in the My Places list.  
Adding a location to My Places by marking 
To mark a location and temporarily add it to My Places, do the following: 
1. Make sure that your current location is the location you want to mark. 
2. Select the current location symbol or the speed panel in the guidance view to open the quick 
menu.  
3. Select Mark Location. 
4. Once marked, the location is saved in My Places in the Marked Locations list. 
If you want to permanently save a marked location, add it My Places by doing the following: 
1. In the Main Menu, select My Places. 
2. Select Marked Locations and choose your location from the list. 
Your location is shown on the map. 
3. Select Add to My Places from the pop-up menu. 
The name of the location appears in the edit screen. 
4. Edit the name of the location so you can easily recognise it. 
5. Select Add.  
Deleting a recent destination from My Places 
1. In the Main Menu, select My Places. 
2. Select Recent Destinations. 
3. Select Edit List. 
4. Select the destinations you want to delete. 
5. Select Delete.  
Deleting a location from My Places 
1. In the Main Menu, select My Places. 
2. Select Edit List. 
3. Select the locations you want to delete. 
4. Select Delete.  
						

							105 
 
 
 
About Map Share 
You can report map changes using Map Share. These map changes are then shared with other 
TomTom device users when they receive a map update. 
There are two ways to report a map change: 
 Select a location on the map and create the change report immediately. 
 Mark a location and create the change report later. 
To send your map change reports to TomTom, you must connect your Rider to your computer and 
use MyDrive Connect. 
All map changes are verified by TomTom. These verified changes are then available as part of the 
next map update which you can get when you connect your device to MyDrive Connect using a USB 
connection. 
Tip: If a road closure is reported using Map Share, the closure is verified and immediately shown 
by TomTom Traffic. 
 
Creating a map correction report 
Important: For safety reasons, do not enter the full details of a map correction while you are 
driving. You can always mark the location and create the report later. 
To create a map correction report, do the following: 
1. Press and hold to select the location of the map correction on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
 
4. Select the type of map correction you want to apply. 
Map Share  
						

							106 
 
 
 
5. Note: If you want to report a map correction of a type not shown in the menu, use the Map 
Share Reporter at tomtom.com. 
 
6. Follow the instructions for your chosen type of map correction. 
7. Select Report. 
8. Connect your Rider to MyDrive to send your map correction report to TomTom and receive map 
corrections from other TomTom users.  
Creating a map change report from a marked location 
If you see a map inconsistency while you are driving, you can mark the location so you can report 
the change later. 
Tip: You can mark your current location even when you are driving. 
Important: Do not report map changes while you are driving. 
1. In the map view or the guidance view, select the current location symbol or the speed panel. 
The Quick Menu opens. 
 
2. Select Mark Location. 
The marked location is stored in My Places with the date and time you saved the location. 
3. In the Main Menu, select My Places. 
4. Open the Marked locations folder and select the marked location. 
The marked location is shown on the map. 
5. Select Report Map Error from the pop-up menu. 
6. Select the type of map change you want to apply.  
						

							107 
 
 
 
Note: If you want to report a map change of a type not shown in the menu, use the Map Share 
Reporter at tomtom.com. 
7. Follow the instructions for your chosen type of map change. 
8. Select Report. 
The marker for the marked location is removed from the map. 
9. Connect your Rider to MyDrive Connect to send your map change report to TomTom and receive 
map changes from other TomTom users.  
Types of map change 
There are several types of map change available. 
Note: If you want to report a map change of a type not described below, use the Map Share 
Reporter at tomtom.com. 
For all map changes described below, you need to connect your Rider to MyDrive Connect to send 
your map changes report to TomTom and receive map changes from other TomTom users. 
Road Restriction 
Select this option to block or unblock a road. You can block or unblock the road in one or both 
directions by doing the following: 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Road Restriction. 
Select the road sign at either end of the road to change it from open to closed or vice versa. 
 
5. Select Report. 
Street Name 
Select this option to correct an incorrect street name. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Street Name. 
5. Enter the correct street name. 
6. Select Report.  
						

							108 
 
 
 
Turn Restriction 
Select this option to report incorrect road turn restrictions. 
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Turn Restriction. 
5. If the incorrect junction is shown, select Select another junction.  
6. Select the approach direction. 
The map rotates so that the direction you are coming from is shown at the bottom of the 
screen. 
7. Select the traffic signs in turn to change the turn restrictions for each road at the junction. 
 
8. Select Report. 
Speed Limit 
Select this option to correct the speed limit on the map.  
1. Press and hold to select the location of the map change on the map view. 
2. Select the pop-up menu button to open the menu. 
3. Select Report Map Error from the pop-up menu. 
4. Select Speed Limit. 
5. Select the correct speed limit.  
If the correct limit is not shown, scroll left or right through the available speed limits.  
6. Select Report.  
						

							109 
 
 
 
About speed cameras 
The Speed Cameras service warns you about the following camera locations: 
 Fixed speed camera locations. 
 Mobile speed camera locations. 
 Mobile speed camera hotspots. 
 Average speed camera locations. 
 Speed enforcement zones. 
 Red light camera locations. 
 Traffic restriction cameras. 
The Speed Cameras service also warns you about the following safety hazards: 
 Accident blackspot locations. 
To get TomTom services on your Rider, you must be connected to TomTom services and logged in to 
a TomTom account.  
Note: TomTom services are not available on all Rider devices. 
Note: Some TomTom services might not be available in your current location. 
 
Crossing into another area or country 
When you drive into an area or country that does not permit speed camera warnings, your Rider 
switches the speed cameras service off. You will not receive speed cameras warnings in those areas 
or countries. 
Some areas or countries permit limited speed camera warnings, for example only warnings for fixed 
cameras, or warnings for risk zones. Your Rider automatically switches to give limited warnings 
when you cross into those areas or countries.  
Speed camera warnings 
Speed camera warning sounds are played for the most common types of speed camera. 
Warnings are given as you approach a speed camera. You are warned in several ways: 
 A symbol is shown in the route bar and on your route on the map. 
 Your distance to the speed camera is shown in the route bar. 
 You hear a warning sound as you get near the camera. 
 While you are approaching a camera or driving in an average speed check area, your speed is 
monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red. 
If you drive less than 5 km/h or 3 mph over the speed limit the route bar turns orange. 
Tip: In the map view or guidance vie, you can select a speed camera symbol in the route bar to 
see the type of camera, the maximum speed and also the length of an average speed check area. 
In the map view, you can also select a speed camera that is shown on your route. 
Speed Cameras  
						

							110 
 
 
 
Symbol shown on 
map 
Symbol shown in 
route bar 
Description 
   
Fixed speed camera - this type of camera 
checks the speed of passing vehicles and is fixed 
in one place. 
   
Mobile speed camera - this type of camera 
checks the speed of passing vehicles and can be 
moved to different locations. 
   
Mobile speed camera hotspots - this type of 
warning shows places where mobile cameras are 
often used. 
   
Average speed cameras - these types of 
cameras measure your average speed between 
two points. You are warned at the start and end 
of the average speed check area. 
While you are driving in an average speed check 
area, your average speed is shown, instead of 
your current speed. The distance to the end of 
the area is shown in the route bar. 
   
Speed enforcement zones - these zones can 
contain multiple speed cameras.  
You are warned at the start and end of a speed 
enforcement zone. While you are driving in a 
speed enforcement zone, your current speed is 
shown, and a visual warning is shown in the 
route bar. 
  
 
Red light camera - this type of camera checks 
for vehicles breaking traffic rules at traffic 
lights. There are two types of traffic light 
camera - those which check if you drive through 
a red light and those which check for driving 
through a red light together with speeding. 
   
Traffic restriction - this type of warning warns 
you about restricted roads. 
   
Accident blackspot - this type of warning is 
given for a place where road traffic accidents 
have historically been concentrated.  
You are warned at the start and end of the 
accident blackspot. While you are driving in an 
accident blackspot, your current speed is shown 
and a visual warning is shown in the route bar.